Instrukcja obsługi Elinchrom ELC 500

Elinchrom Lampa ELC 500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Elinchrom ELC 500 (2 stron) w kategorii Lampa. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
ERROR MANAGEMENT ELC CONNECTION
Error
number Desription Solution
1 Capacitor overvoltage
Switch the unit off, wait
2 minutes and switch the
unit on again. If the error
shows up again the unit
requires a check-up at
an authorized Elinchrom
Service Centre.
4 Charge timeout
6Voltage unstable
(Charge hold error)
18 Discharge circuit error
32 Head board type unknown
33 14 VDC error
www.elinchrom.ch/support
ELC
125 / 500
Unit
Quick Start Guide
www.elinchrom.com
Elinchrom is a registered trademark of ELINCHROM LTD, RENENS, SWITZERLAND
QSG ELC 125 / 500 - 08.2019
Av. de Longemalle 11, P. O. Box -458, CH-1020 Renens, Switzerland,
Tel. : + 41 21 637 26 77 Fax: +41 21 637 26 81 E-mail: elinchrom@elinchrom.ch
USB socket for
rmware update
Power supply
Sync socket
MODELLING LAMP BUTTON
CONTROL PANELSETUP MENU
Long press to enter the menu.
Press menu for Mode, VFC, Timer.
On / Off
Photocell
Radio
Mode Normal SpeedOff
Group 1-4
Frequency 1-20
Flash mode
Flash mode Standard Action
Recycling time EcoFast
Flash before ready Yes No
Photocell Mode On Off
Extras
Auto stand-by 1-59 min.Off
Auto-off 1-60 min.Off
Auto-on NoYes
Favorite function Flash mode, Recycling time, Flash before ready,
Skyport Group, Photocell Mode, Background
Logo mode Low, High, Off, Low on ready, High on ready
Logo color Group color White
Ready tone 1-12
Ready volume Off, Min, Low, Default, High, Max
Error volume Off, Min, Low, Default, High, Max
Keyboard click Off, Min, Low, Default, High, Max
Background Black White
Info
Friendly name “ELC XXX -1” by default (set through computer), XXX =
125 / 500 depending on the model
Firmware rev. *******
Skyport ID *******
Life time In hours (hhhh:mm)
Power-on count How many times the units has been turned on
Flash count Total ash number
-1 f-stop
/ back
+1 f-stop
/ exit
Favorite
function
Knob Button
CW: +0.1 f-stop / down
CCW: -0.1 f-stop / up
DISPLAY PANEL – DASHBOARD
The colours of the upper bar correspond to the group number :
blue for the group 1, yellow for the group 2, red for the group 3
and green for the group 4.
1. EL-Skyport Synchronisation
(normal or speed sync mode)
2. EL-Skyport frequency channel
and group number
3. Photocell status
4. Flash mode Action
5. Volume
6. Recycling time
7. Power setting in
f-stop equivalents
8. Increase by 1 f-stop
9. Decrease by 1 f-stop
10. Flash Duration value
1. Menu selected
2. Selected menu options
3. Menu option settings navigation
4. Exit menu navigation
5. Back
Knob Button :
Scroll function to change setting /
press function to enter the menu option.
1
5 4
2
Knob Button
3
1 2 3 4 65
89
10
7


Specyfikacje produktu

Marka: Elinchrom
Kategoria: Lampa
Model: ELC 500

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Elinchrom ELC 500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Lampa Elinchrom

Instrukcje Lampa

Najnowsze instrukcje dla Lampa