Instrukcja obsługi Electro Harmonix Clockworks

Electro Harmonix system hi-fi Clockworks

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Electro Harmonix Clockworks (4 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

CLOCKWORKS

Rhythm Generator / Synthesizer

Congratulations on your purchase of the Electro-Harmonix CLOCKWORKS!

The CLOCKWORKS is perfect as a master clock for sequencers and drum

machines as well as for triggering electronic percussion, classic EHX drum

synths such as the Crash Pad or any other electronic device that can be

triggered by pulses. Best of all, it is a faithful reissue of the much sought-

after classic first released by Electro-Harmonix in 1980.

CLOCKWORKS does not create sound on its own but instead generates

pulses to trigger other devices. The pulse trigger can set the tempo for a

drum machine or sequencer such as an EHX 8 Step. CLOCKWORKS’ pulses

might directly play a device by triggering a sound or note in the external

device. The great thing about the CLOCKWORKS is you have four separate

clock channels so you can connect four devices which will all play

rhythmically with each other.

The CLOCKWORKS may look complicated but what it does is actually pretty

simple: it takes a master clock and divides down its frequency by a whole

number between 1 and 8, outputting a pulse at the new frequency created

by the divider. There are 4 clock dividers or channels, each driven from the

same master clock, so creating polyrhythms is fun and easy! Each channel

has its own clock divider control, output level control and output jack. The

master clock can be generated internally by the CLOCKWORKS or may come

from an outside source. Although the CLOCKWORKS looks very much like a

digital product, it is actually fully analog, not that there is anything wrong

with digital products.

WARNING:

Your CLOCKWORKS comes equipped with an Electro-Harmonix

18V -5 power supply. The CLOCKWORKS requires up to 300mA at DC 00mA

18VDC with a center POSITIVE plug. The CLOCKWORKS does not take

batteries. Using the wrong adapter ower supply may damage your unit and /p

void the warranty.

- CONTROLS, INDICATORS & I/O-

The following descriptions detail all of the sliders, switches, LEDs (lights) and

I/O jacks on the CLOCKWORKS:

CH 1-4 DIVISOR Sliders & LEDS

Each channel has its own independent DIVISOR slider control. Set a given

channel’s clock divider by moving the center of its DIVISOR slider to the

number you wish to divide by. For example, if you want Channel 2 to divide

the master clock by 3, set the CH 2 DIVISOR to 3, centering the slider on the

mark for 3.

Above each DIVISOR slider is an LED. The LED blinks each time the channel

sends out its clock pulse.

CH 1-4 LEVEL Sliders

Each channel has its own independent output LEVEL control. The LEVEL

slider sets a given channel’s output pulse amplitude or level. The maximum

output pulse level is 10Vpp. The pulse waveform ranges from 0V to +10V, it

does not go below 0V. As you bring the LEVEL sliders down, the amplitude

decreases to 0V.

HOW TO SET THE LEVEL CONTROL:

Start with the LEVEL control at its bottom position. Move the LEVEL control

upwards while listening to or watching the slave device to which the channel

is connected. At lower LEVEL settings the slave device might not be triggered

at all or by only every other pulse from the Clockworks. Push the LEVEL

control up until each pulse from the Clockworks triggers the slave. Once you

reach this position, push LEVEL up a little bit more and then stop. The LEVEL

control is now set.

OUT 1 - OUT 4 Output Jacks

Each clock divider channel has its own independent output jack. CH 1

connects to OUT 1, CH 2 to OUT 2, etc. The level of the pulse at each output

jack is controlled by its channel’s LEVEL slider. These jacks are mono/TS ¼”

jacks; insert any standard patch or instrument cable into the jacks.

CLOCK TEMPO Slider

The TEMPO slider located in the CLOCK section of the Clockworks adjusts the

master tempo or speed of the internal clock generator. When the CLOCK

toggle switch is set to INT (for internal), the TEMPO slider sets the tempo

that all four clock channels follow. TEMPO slider range: in BPM: 50BPM –

2,400BPM; in Hz: 0.85Hz - 40Hz.

CLOCK LEVEL Slider

The LEVEL slider located in the CLOCK section of the Clockworks adjusts the

output level of the internal master clock sent to the CLOCK IN/OUT jack. The

maximum output pulse is 14Vpp. The pulse waveform ranges from 0V to

+14V, it does not go below 0V. As you bring the LEVEL slider down, the

amplitude decreases to 0V. See the section on the previous page entitled

HOW TO SET THE LEVEL CONTROL for help setting the CLOCK LEVEL

control.

CLOCK INT/EXT Switch

The CLOCK switch determines the source for the master clock sent to the

four individual channels. When set to INT, the master clock is generated

internally by the Clockworks (and set by the TEMPO slider). The internal

clock is also sent out the CLOCK IN/OUT jack when set to INT.

When the CLOCK switch is set to EXT (for external), the internal clock is shut

off and the Clockworks connects the external clock present at the CLOCK

IN/OUT jack to the four clock divider channels. If no clock is connected to

the CLOCK IN/OUT jack, the Clockworks TEMPO LED does not blink, it

remains in a static state. When set to EXT, the CLOCK LEVEL slider is

inactive. The CLOCK TEMPO slider adjusts the amplitude of the external

clock. We recommend you set TEMPO anywhere between its maximum and

middle slider positions when using external clock. The acceptable input

amplitude range for the external clock signal is 4Vpp to 15Vpp for a clock

that swings positive only or +/-2 Vpp to +/-7.5 Vpp for a bi-polar clock. The

maximum acceptable external clock frequency that yields full pulse amplitude

out of all four channels is 65 Hz. The output pulses drop in amplitude as the

clock frequency rises above 65 Hz.

CLOCK LED

The LED above the TEMPO slider blinks at the same rate as the master clock

signal whether the clock is generated internally or externally.

CLOCK IN/OUT Jack

When set to INT mode, the CLOCK IN/OUT jack is an output, the internally

generated clock pulses will be output from this jack. When set to EXT mode,

CLOCK IN/OUT is an input, connect your externally generated clock to this

jack.

18V Power Jack

Insert the output plug from the supplied 18VDC/500mA AC Adapter that

came with your Clockworks into the 18V power jack located at the front of

your Clockworks. The Clockworks’ power jack is center positive, requiring

18VDC with a minimum current rating of 300mA. The Clockworks can be

powered from a voltage as low as 15VDC but the maximum output pulse

amplitude will decrease and the maximum divisor, at the slider s lowest ’

position, may increase to 9 or 10. We do not recommend powering the

Clockworks with voltages below 15VDC which may yield unpredictable

results.

Specyfikacje produktu

Marka:	Electro Harmonix
Kategoria:	system hi-fi
Model:	Clockworks

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Electro Harmonix Clockworks, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje system hi-fi Electro Harmonix

Electro Harmonix Pico POG Instrukcja

26 Września 2024

Electro Harmonix White Finger Instrukcja

18 Września 2024

Electro Harmonix Micro POG Instrukcja

14 Września 2024

Electro Harmonix Nano POG Instrukcja

11 Września 2024

Electro Harmonix H.O.G.2 Instrukcja

10 Września 2024

Electro Harmonix Clockworks Instrukcja

10 Września 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI EIE Pro Instrukcja

13 Października 2024

Sharp XL-540H Instrukcja

11 Października 2024

Kenwood M-9000S Instrukcja

10 Października 2024

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024

Morel SUB-10X Instrukcja

9 Października 2024

Morel USUB 803 Instrukcja

9 Października 2024

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024

Morel Sopran 934 Instrukcja

9 Października 2024

NAD M10 V3 Instrukcja

9 Października 2024

NUVO NV-MPS4-E Instrukcja

8 Października 2024