Instrukcja obsługi Elba ETC-E3400
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Elba ETC-E3400 (1 stron) w kategorii Kraan. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
1. An opening hole of 25mm diameter is required on sink top or work top (D) for installation of tap.
2. Slide the rubber O-ring (C) over the threaded tube (B) and up to the base of tap (A).
3. Insert the threaded tube (B) through the hole of sink top or work top (D) and position the tap properly.
4. Slide the rubber O-washer (E) and metal O-washer (F) over the threaded tube (B) and up to the underside
of sink top or work top (D).
5. Screw and fasten the fixing nut (G). Please ensure the fixing nut (G) is tightened securely.
6. Connect the flexi hose (I) with rubber O-washer (H) to threaded tube (B) on one end and the water supply
on the other end.
ETC-E3300 ETC-E3400 ETC-E3600
●Before installation, please ensure that the following work
conditions are adhered to:
-Water temperature between 0 C - 90 C˚ ˚
-Water pressure between 0.05MPa – 1.0MPa. Pressure reducing
valve is necessary if pressure exceeds 1.2MPa
-Avoid major pressure di erences between hot and cold water ff
supply
●Flush pipes thoroughly before and after installation to ensure
water supply is free of any debris.
●Inspect tap fitting and debugged to its best. Do not attempt to
disassemble fitting on your own.
●Use thread sealant tape (PTFE) on any screw joining
connections and ensure all joints are securely tightened.
This . FIAMMA SDN. BHD. will not be held responsible for the use of superseded or voided specifications.
Fabricatoe must check for cut-out accuracy.
specification is subject to change without notice
Stainless Steel Mixer Tap
Specyfikacje produktu
Marka: | Elba |
Kategoria: | Kraan |
Model: | ETC-E3400 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Elba ETC-E3400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Kraan Elba
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
Instrukcje Kraan
- Kraan Ikea
- Kraan Teka
- Kraan Smeg
- Kraan Lamona
- Kraan Berg
- Kraan Nodor
- Kraan Grohe
- Kraan Axor
- Kraan CDA
- Kraan Oliveri
- Kraan Delta
- Kraan Franke
- Kraan Inventum
- Kraan Livarno Lux
- Kraan Caple
- Kraan Hansgrohe
- Kraan Sussex
- Kraan BLANCO
- Kraan Ernesto
- Kraan Schütte
- Kraan Elkay
- Kraan Quooker
- Kraan Empire
- Kraan Moen
- Kraan Aloni
- Kraan WillieJan
- Kraan Sani-Lav
- Kraan Brauer
- Kraan Fala
- Kraan Neo
- Kraan Lomazoo
- Kraan Zip
- Kraan Waltec
- Kraan Gessi
- Kraan Graff
- Kraan Zurn
Najnowsze instrukcje dla Kraan
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024