Instrukcja obsługi Elba EBL-A1812G

Elba blender EBL-A1812G

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Elba EBL-A1812G (7 stron) w kategorii blender. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/7
1
BLENDER
MODEL: EBL-A1812G(SS)
Owners Manual
Please read this manual carefully
before operating your set.
Retain it for future reference.
Record model number and serial
number of the set.
See the label attached on the set and
quote this information to your dealer
when you require service.
For The Warranty Terms & Conditions, Please Refer To Warranty Certificate.
2
IMPORTANT SAFEGUARDS
When using this appliance, basic precautions should always be followed, including
the following:
1. Read all instructions before using.
2. Do not operate the appliance with damaged power cord or plug, after the
appliance malfunction, or if it is dropped or damaged in any manner. Return the
appliance to the nearest authorized dealer or after-sales service center for
examination, repair, electrical or mechanical adjustment.
3. Do not use the appliance if the plug, the mains cord or other parts are damaged.
4. Do not let the power cord hang over edge of table or counter or hot surface.
5. Do not place the appliance on or near hot gas or electric burner, or in a heated
oven.
6. Do not leave the appliance unattended while operating.
7. Do not touch the cutting edges of the blender blade unit when you clean it. They
are very sharp and you could easily cut your fingers on them.
8. Do not operate the appliance for more than 3 minutes continuously at a time. If
you have not finished processing after 3 minutes, switch off the appliance and let it
cool down before you operate it again.
9. To prevent failure of the appliance, make sure that no food or liquids enter the
connection point between the blade unit interface and the motor base.
10. To prevent spillage, do not put more than 1.0 liters of liquid in the glass jar,
especially when you process at a high speed.
11. Never reach into the glass blender with your fingers or an object while the
appliance is running.
12. Never use any accessories or parts from other manufacturers or that ELBA does
not specifically recommended.
13. Oversized foods or metal utensils must not be inserted into the glass jar as they
may cause fire or risk of electric shock.
14. If foods stick to the wall of the glass jar, switch off the appliance and unplug it. Use
a spatula to remove the foods from the wall.
15. Always make sure the jar cover is properly closed/assembled on the glass jar and
the lid is inserted properly in the jar cover before you switch on the appliance.
16. Never immerse motor base in water or any other liquids nor rinse it under
the tap. Use only a moist cloth to clean the motor base.
17. Close supervision is necessary when your appliance is being used near children
or infirm persons.
18. Always unplug the appliance before you assemble, dissemble or make adjustment
to any parts of the blender.
19. Do not operate the appliance for other than its intended use.
20. Do not use this blender outdoors.
21. This appliance is for domestic use only.
22. This appliance is not intended for used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliances by a person responsible for their safety.
23. Children should be supervised to ensure that they do not play with the appliance.
24. Save these instructions for future reference.
3
PRODUCT DESCRIPTION
1. Lid
2. Jar cover
3. Glass jar
4. Blade unit interface
5. Sealing ring
6. Blade unit
7. Motor base
8. Control knob
BUILT-IN SAFETY LOCK
This feature ensures that you can only switch on the appliance if you have properly
assembled the glass jar on the motor base. When the glass jar is correctly assembled
on the motor base, the jar seating will push the built-in safety lock on the motor base
and the safety lock be unlock.
* When moving or handling the blender, the whole unit cannot be tilted in
order to prevent the glass jar from falling down.

Specyfikacje produktu

Marka: Elba
Kategoria: blender
Model: EBL-A1812G

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Elba EBL-A1812G, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje blender Elba

Elba

Elba EBL-F1533(GR) Instrukcja

8 Października 2024
Elba

Elba EBG-F1532(PP) Instrukcja

8 Października 2024
Elba

Elba EBG-F1534(GR) Instrukcja

8 Października 2024
Elba

Elba EBL-F1531(PP) Instrukcja

8 Października 2024
Elba

Elba EBL-A1812G Instrukcja

8 Października 2024
Elba

Elba EBM-9181 Instrukcja

8 Października 2024
Elba

Elba EBM-9179 Instrukcja

8 Października 2024
Elba

Elba EBL-9183 Instrukcja

8 Października 2024
Elba

Elba EBL-9180 Instrukcja

8 Października 2024
Elba

Elba EBM-9182 Instrukcja

8 Października 2024

Instrukcje blender

Najnowsze instrukcje dla blender

Bamix

Bamix Mono Instrukcja

11 Października 2024
Scarlett

Scarlett SC-HB42F80 Instrukcja

11 Października 2024
Kenwood

Kenwood CL639 Instrukcja

10 Października 2024
Orbegozo

Orbegozo LI 5060 Instrukcja

10 Października 2024
Orbegozo

Orbegozo BV 9800 Instrukcja

9 Października 2024
KitchenAid

KitchenAid KHBRV05 Instrukcja

9 Października 2024
KitchenAid

KitchenAid KHBRV75 Instrukcja

9 Października 2024
Ufesa

Ufesa Vario Max BP4654 Instrukcja

9 Października 2024