Instrukcja obsługi ELAC S10.2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ELAC S10.2 (29 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/29
S10.2 Powered Subwoofer OPERATING INSTRUCTIONS
ELAC S10.2 POWERED SUBWOOFER
ELAC S10.2 Subwoofer | www.elac.com | Page 1
Safety Instructions
1. General information
• Please read and follow these safety instructions.
• Keep them safe for future reference.
• Observe all warnings on the speaker and in the manual. Please check the speaker for damage before
use. The speaker must be in perfect working condition. Damaged parts may lead to personal injury.
• CAUTION! Subwoofers and active speakers may be heavy. Be careful when lifting them to prevent
personal injury.
2. Use only as directed
• Connect the speaker(s) according to the instructions in the manual.
• Many ELAC speakers are equipped with spikes and/or anti-slip feet. They are explicitly provided for
levelling the speaker. For levelling on an uneven floor, unscrew the spikes or anti-slip feet by 2-3 turns of
thread. The speaker should always be in perfect vertical alignment: the stability of the speaker must not
be compromised by using spikes or anti-slip feet as the speaker may tip-over.
3. Location
• Install the speakers on a level surface only
• When choosing the location of these speakers do not place them in locations that are:
• In direct sunlight
• Very humid
• Prone to vibrations
• Exceptionally hot or cold
• Near CRT Televisions (the speakers are not magnetically shielded and may cause color issues
with a CRT based TV)
• Close to magnetic cards (Since the speakers are not magnetically shielded placing magnetic
cards such as credit cards or commuter cards may cause them to fail).
WARNING! Please ensure the product is perfectly stable to avoid injury from tip-over. Please note, that stability
can be increased by using spikes on carpeted surfaces. However, the mounting of spikes must be carried out
carefully due to their very sharp ends which may cause injuries. The stability on slippery floors can be increased
by using Velcro fastening tape or double-sided adhesive tape. Do not install the speaker near any heat
sources such as radiators, heating valves, stoves, or other apparatus (including amplifiers) that produce heat, or
in areas where there is a risk of explosion.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install the speaker in a closed rack or in a closed cupboard.
• Do not put burning candles on or near the speaker.
• Do not install the speaker near transformers because electromagnetic stray fields can cause hum noise
on woofers.
• In combination with certain materials / lacquers / material surfaces, anti-slip feet or spike washers may
cause colored imprints on the surfaces.
ELAC S10.2 Subwoofer | www.elac.com | Page 2
4. Overload
• Extreme overload of the device due to very high volume may cause damage to individual components.
Because of the possible danger, you should never leave loudspeakers under extreme overload
conditions unattended.
5. Service
• DANGER! Do not open the cabinet because of potentially hazardous voltages exist inside! Servicing to
be carried out by qualified service personnel only.
• Servicing is required when the loudspeaker has been damaged in any way, such as damage to
the power supply cord or the plug, or when liquid has been spilled or objects have fallen into the
loudspeaker, the speaker has been exposed to rain or moisture, does not operate normally, or has been
dropped. To reduce the risk of electric shock, do not open the loudspeaker. Servicing to be carried out
by qualified service personnel only.
6. Fuse links
• Various faults in subwoofers or active speakers may cause the fuse to blow. If the fuse blows, only
replace it with the correct fuse type and rating as shown on the rear of the loudspeaker on the fuse
holder.
7. Cleaning
• NOTE: Clean only with soft, smooth cloth or with dust brush. Do not use scouring agents, alcohol,
benzene, furniture polish or other agents for cleaning! Modern furniture is often coated with multiple
varnishes and plastics which can be treated with chemical agents. Some of these agents contain
substances which degrade or soften the rubber feet. Therefore we advise you to place an anti-slip mat
underneath the loudspeaker.
8. Volume
• CAUTION! Continuous high volume may cause severe damage to your hearing. Please listen responsibly.
9. Disposal
• The packaging is made from recyclable materials. Dispose of this in an environmentally friendly manner.
At end of life do not dispose the speaker with the standard household waste. The speaker must be
recycled in accordance with local legislation. Ask your local government for further information on
recycling as the device contains valuable raw materials. Disable the speaker before disposal.
10. Power
• This subwoofer is only intended to be connected to voltages that are listed on the rear panel of the
cabinet. Connection to any other voltage may cause irreversible damage to the subwoofer and will void
the warranty. Use of plug adapters is not recommended because they may allow connection to voltages
other than those printed on the back of this subwoofer.
Specyfikacje produktu
| Marka: | ELAC |
| Kategoria: | subwoofer |
| Model: | S10.2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z ELAC S10.2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje subwoofer ELAC
15 Września 2024
4 Września 2024
27 Sierpnia 2024
15 Sierpnia 2024
15 Sierpnia 2024
5 Lipca 2024
4 Lipca 2024
Instrukcje subwoofer
- subwoofer Yamaha
- subwoofer Pioneer
- subwoofer Bosch
- subwoofer JBL
- subwoofer Onkyo
- subwoofer Roland
- subwoofer KEF
- subwoofer Klipsch
- subwoofer Behringer
- subwoofer Boss
- subwoofer Marquant
- subwoofer Jensen
- subwoofer Blaupunkt
- subwoofer Speed-Link
- subwoofer Metra
- subwoofer Martin Logan
- subwoofer Phoenix Gold
- subwoofer Audac
- subwoofer Kenwood
- subwoofer Polk
- subwoofer Alpine
- subwoofer Dynaudio
- subwoofer Paradigm
- subwoofer JVC
- subwoofer Memphis Audio
- subwoofer Jamo
- subwoofer Nubert
- subwoofer LD Systems
- subwoofer Krüger&Matz
- subwoofer Fusion
- subwoofer Neumann
- subwoofer Magnat
- subwoofer Pyle
- subwoofer Sonus Faber
- subwoofer Marantz
- subwoofer Bowers & Wilkins
- subwoofer Vonyx
- subwoofer Peavey
- subwoofer Harman Kardon
- subwoofer JL Audio
- subwoofer REL Acoustics
- subwoofer Teufel
- subwoofer Dali
- subwoofer Proel
- subwoofer Hifonics
- subwoofer Focal
- subwoofer Kicker
- subwoofer Omnitronic
- subwoofer Mackie
- subwoofer Deaf Bonce
- subwoofer SVS
- subwoofer Arcam
- subwoofer Infinity
- subwoofer McIntosh
- subwoofer Dynacord
- subwoofer Hertz
- subwoofer Atlas Sound
- subwoofer Definitive Technology
- subwoofer PowerBass
- subwoofer Kanto
- subwoofer Rockford Fosgate
- subwoofer Canton
- subwoofer Monacor
- subwoofer Tannoy
- subwoofer SPL
- subwoofer Indiana Line
- subwoofer HK Audio
- subwoofer Fenton
- subwoofer Sonance
- subwoofer Cabasse
- subwoofer Sonos
- subwoofer Musway
- subwoofer Renegade
- subwoofer MB Quart
- subwoofer Atlantic
- subwoofer QSC
- subwoofer Genelec
- subwoofer Apart
- subwoofer Eve Audio
- subwoofer FBT
- subwoofer Soundstream
- subwoofer Citronic
- subwoofer Wet Sounds
- subwoofer Morel
- subwoofer Mtx Audio
- subwoofer GoldenEar Technology
- subwoofer Velodyne
- subwoofer Chrysalis
- subwoofer IMG Stage Line
- subwoofer Sound Ordnance
- subwoofer MadBoy
Najnowsze instrukcje dla subwoofer
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024