Instrukcja obsługi Eizo FlexScan EV2430

Eizo monitor FlexScan EV2430

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Eizo FlexScan EV2430 (49 stron) w kategorii monitor. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/49

Important

Please read this “User’s Manual”, and “PRECAUTIONS” (separate

volume) carefully to familiarize yourself with safe and effective usage.

•Refer to the “Setup Guide” for information on the installation /

connection of the monitor.

•For the latest product information including the “User’s Manual”,

refer to our web site :

http://www.eizoglobal.com

Color LCD Monitor

User’s Manual

Location of Caution Statement

This product has been adjusted specically for use in the region to which it was originally shipped. If

operated outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

effort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

Notice for this monitor

This product is suited to general purposes like creating documents, viewing multimedia content (Assuming

usage of approximately 12 hours per day).

If using this product for the following kinds of applications, where an extremely high degree of reliability and

safety is required, then measures should be in place to maintain safety while using this product.

• Transportation equipment (ships, aircraft, trains, and automobiles)

• Safety devices (Disaster prevention systems, security control systems, etc.)

• Life-critical devices (medical devices, such as life-support devices and operating room devices)

• Nuclear energy control devices (Nuclear energy control systems, security control systems of nuclear facilities, etc.)

• Major system communication devices (operation control systems of transportation systems, air trafc control systems, etc.)

This product has been adjusted specically for use in the region to which it was originally shipped. If the

product is used outside the region, it may not operate as specied in the specications.

This product may not be covered by warranty for uses other than those described in this manual.

The specications noted in this manual are only applicable when the following are used:

• Power cords provided with the product

• Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

If you place this product on a lacquer-coated desk, the color may adhere to the bottom of the stand due to

the composition of the rubber. Check the desk surface before use.

It takes about 30 minutes (under our measurement conditions) for the monitor display to stabilize. Please

wait 30 minutes or more after the monitor power has been turned on, and then adjust the monitor.

Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and

maintain a stable display.

When the screen image is changed after displaying the same image for extended periods of time, an

afterimage may appear. Use the screen saver or power save function to avoid displaying the same image for

extended periods of time. Depending on the image, an afterimage may appear even if it was displayed for

a short period of time. To remove such a phenomenon, change the image or keep the power turned off for

several hours.

If the monitor displays continuously over a long period of time, dark smudges or burn-in may appear. To

maximize the life of the monitor, we recommend the monitor be turned off periodically.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer

to “Cleaning” (page 4)).

The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may

appear on the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994 % or higher.

The backlight of the LCD panel has a xed lifetime. Depending on the usage pattern, such as usage for

long continuous periods, the lifespan of the backlight may run out sooner, requiring replacement. When the

screen becomes dark or begins to icker, please contact your local EIZO representative.

Do not press on the LCD panel or edge of the frame strongly, as this may result in display malfunctions, such

as interference patterns, etc. If pressure is continuously applied to the LCD panel surface, the liquid crystal

may deteriorate or the LCD panel may be damaged. (If the pressure marks remain on the panel, leave the

monitor with a black or white screen. The symptom may disappear.)

Do not scratch or press on the LCD panel with any sharp objects, at this may result in damage to the LCD

panel. Do not attempt to brush with tissues as this may scratch the panel.

Specyfikacje produktu

Marka:	Eizo
Kategoria:	monitor
Model:	FlexScan EV2430
Skala efektywności energetycznej:	Od A do G
Klasa efektywności energetycznej (SDR):	E
Zużycie energii (SDR) na 1000 godzin:	15 kWh
Zużycie energii (HDR) na 1000 godzin:	- kWh
Kod Europejskiego Rejestru Produktów na potrzeby Etykietowania Energetycznego (EPREL):	346712