Instrukcja obsługi Eizo ColorEdge CG2730

Eizo monitor ColorEdge CG2730

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Eizo ColorEdge CG2730 (116 stron) w kategorii monitor. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/116
Important
Please read this User’s Manual carefully to familiarize yourself with
safe and effective usage.
The latest software and User’s Manual are available for download
from our web site:
http://www.eizoglobal.com
Ver. 6.4
2About This Manual
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior
arrangements are made pursuant to EIZO Corporations receipt of said information. Although every effort has been
made to ensure that this manual provides up-to-date information, please note that specications are subject to change
without notice.
About This Manual
This manual describes the features, installation, and usage of the Color Management Software “ColorNavigator.
This manual consists of the following four sections.
INSTALLATION Describes software introductory information such as how to install it and how to
connect with the measurement device and the monitor.
P.5
BASIC Describes basic software operations necessary to adjust the monitor. P.20
APPLICATION Describes applicable operations such as manual adjustment and prole
emulation. Advanced knowledge regarding color management and computers is
required.
P.51
REFERENCE Provides supplementary explanations and reference information such as
SelfCalibration / SelfCorrection settings and troubleshooting.
P.84
3
CONTENTS
CONTENTS
About This Manual 2 ................................................
CONTENTS 3 .............................................................
INSTALLATION ............................... 5
Chapter 1 Introduction ....................................... 6
1-1. About ColorNavigator .................................. 6
1-2. About ColorNavigator License .................... 6
How to Check License Registration 6 ................
1-3. Features ......................................................... 7
1-4. Main Window 8 .................................................
About Marks ...................................................10
Chapter 2 Setting Up ........................................ 11
2-1. System Requirements .................................11
2-2. Installing Software ....................................... 14
Macintosh .......................................................14
Windows .........................................................17
2-3. Connecting Monitor with Measurement
Device ............................................................19
2-4. Uninstalling Software ..................................19
Macintosh .......................................................19
Windows .........................................................19
BASIC ........................................... 20
Chapter 3 Starting Up and Quitting ................ 21
3-1. Starting Up ColorNavigator ........................21
Macintosh .......................................................21
Windows 10 ....................................................21
Windows 8.1 ...................................................21
Windows 7 ..................................................... 22
3-2. Displaying Software Version ..................... 22
3-3. Quitting ColorNavigator ............................. 23
Macintosh ...................................................... 23
Windows ........................................................ 23
Chapter 4 Adjusting Monitor ........................... 24
4-1. Preparing Adjustment ................................ 24
4-2. Adjusting Monitor ....................................... 25
Chapter 5 Creating Adjustment Target .......... 32
Chapter 6 Periodic Adjustment ....................... 45
6-1. Timer ............................................................. 45
6-2. About SelfCalibration / SelfCorrection .... 45
Chapter 7 Validating Adjustment Status
of Monitor ........................................ 46
APPLICATION ............................... 51
Chapter 8 Setting Monitor Validation ............. 52
8-1. Importing the Validation Target ................ 52
8-2. Deleting Validation Target.......................... 54
Chapter 9 Customizing Adjustment Target ... 55
9-1. Exporting and Importing the Adjustment
Target ............................................................ 55
9-2. SettingaProlePolicy ............................... 56
9-3. Setting Destination Folder for ICC
ProleSaving .............................................. 57
9-4. CreatingProleEmulationData ................ 59
9-5. Manual Adjustment ......................................61
9-6. Adjusting Light Booth ................................ 65
Chapter 10
Customizing Monitor Adjustment
... 70
10-1. Setting Measurement Device......................70
10-2. Standard Mode calibration .........................71
Chapter 11 Creating Film Emulation Data ....... 72
Chapter12 CreatingICCProleofTablet/
Display Device ................................ 73
12-1. CreatingICCProleofTablet/Display
Device to be Emulated.................................74
12-2. SavingICCProle ....................................... 80
12-3. Exporting and Importing the
Measurement Result ....................................81
12-4. Creating Average Value from
Measurement Result ................................... 82
12-5. SettingICCProleCreationProcedure ... 83
12-6. Deleting Measurement Result ................... 83
REFERENCE ................................ 84
Chapter 13 Making Use of the Built-in
Calibration Sensor / Built-in
Correction Sensor .......................... 85
13-1. About Built-in Calibration Sensor / Built-
in Correction Sensor .................................. 85
13-2. Correlate with the Reference
Measurement Device .................................. 85
13-3. Setting the SelfCalibration /
SelfCorrection Schedule ............................ 89
SelfCalibration ............................................... 90
SelfCorrection ................................................91
Chapter 14 Reference ........................................ 92
14-1. Using ColorNavigator in Multiple
Monitor Environment .................................. 92
14-2. Adjusting Monitor with Multiple PCs
Connected .................................................... 93
14-3. Using ColorNavigator Agent ..................... 94
Available Functions ....................................... 94
Active Icon ..................................................... 94
Preventing ColorNavigator to reside ............. 95
Changing Adjusted Target ............................. 95


Specyfikacje produktu

Marka: Eizo
Kategoria: monitor
Model: ColorEdge CG2730
Kolor produktu: Czarny
Opcja regulacji wysokości: Tak
Wbudowany wyłącznik: Tak
Częstotliwość wejściowa AC: 50 - 60 Hz
Napięcie wejściowe AC: 100 - 240 V
Skala efektywności energetycznej: Od A do G
Wbudowane głośniki: Nie
Maksymalne zużycie mocy: 95 W
Typ HD: Quad HD
Typ ekranu: IPS
Długość przekątnej ekranu: 27 "
Rozdzielczość: 2560 x 1440 px
Współczynnik kontrastu (typowy): 1500:1
Natywne proporcje obrazu: 16:9
Ekran dotykowy: Nie
Kod zharmonizowanego systemu (HS): 85285210
Pobór mocy w trybie czuwania: 0.5 W
Kompatybilność 3D: Nie
Pobór mocy: 36.1 W
Ilość portów DVI-D: 1
Ilość portów HDMI: 1
Zasilanie: Tak
Ilość DisplayPort: 1
Jasność wyświetlacza (typowa): 350 cd/m²
Technologia wyświetlacza: LED
Kształt ekranu: Płaski
Kąt widzenia (poziomy): 178 °
Kąt widzenia (pionowy): 178 °
Kolory wyświetlacza: 1.073 billionów kolorów
Czas odpowiedzi (typowy): 13 ms
Rozmiar plamki: 0.233 x 0.233 mm
Częstotliwość odświeżania poziomego: 15 - 89 kHz
Częstotliwość odświeżania pionowego: 23 - 61 Hz
Rozmiar obrazu (w poziomie): 597 mm
Rozmiar obrazu (w pionie): 336 mm
NVIDIA G-SYNC: Nie
AMD FreeSync: Nie
Wbudowana kamera/aparat: Nie
Pozycjonowanie na rynku: Projektowanie grafiki
Standard VESA: Tak
Interfejs do montażu panelu: 100 x 100 mm
Kensington Lock: Nie
Regulacja wysokości: 155 mm
Oś obrotu: Tak
Kąt obrotu wokół osi: 0 - 172 °
Wbudowany USB hub: Tak
Wersja USB hub: 3.2 Gen 1 (3.1 Gen 1)
Ilość portów USB Typu A downstream: 2
HDCP: Tak
Klasa efektywności energetycznej (SDR): G
Zużycie energii (SDR) na 1000 godzin: 36 kWh
Zużycie energii (HDR) na 1000 godzin: - kWh
Szerokość urządzenia (z podstawą): 553 mm
Głębokość urządzenia (z podstawą): 245 mm
Wysokość urządzenia (z podstawą): 544 mm
Szerokość (bez podstawy): 553 mm
Głębokość (bez podstawy): 64 mm
Wysokość (bez podstawy): 345 mm
Waga (bez podstawy): 8900 g
Paleta barw: 99 %
Obsługiwane rozdzielczości grafiki: 1920 x 1080 (HD 1080), 2560 x 1440
Wbudowany tuner tv: Nie
Obsługiwane tryby wideo: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 1440p
OSD: Tak
Port DVI: Tak
Liczba języków OSD: 8
Języki menu ekranowego: DEU, ENG, ESP, FRE, ITA, JPN, SWE
Ilość portów upstream: 2
Rozmiar obrazu (w poprzek): 684 mm
Kod Europejskiego Rejestru Produktów na potrzeby Etykietowania Energetycznego (EPREL): 356592

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Eizo ColorEdge CG2730, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor Eizo

Eizo

Eizo FlexScan EV2450F Instrukcja

7 Października 2024
Eizo

Eizo FlexScan HD2441W Instrukcja

7 Października 2024
Eizo

Eizo FlexScan EV2416W Instrukcja

7 Października 2024
Eizo

Eizo SX2462W Instrukcja

7 Października 2024
Eizo

Eizo FlexScan EV2495 Instrukcja

2 Października 2024
Eizo

Eizo ColorEdge CG245W Instrukcja

2 Października 2024
Eizo

Eizo FlexScan EV2480 Instrukcja

2 Października 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor