Instrukcja obsługi Ednet Dash Cam HD 87231

Ednet kamera samochodowa Dash Cam HD 87231

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ednet Dash Cam HD 87231 (5 stron) w kategorii kamera samochodowa. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
DASH CAM, HD
Manual
87231
In order to make better use of all the function of the car DVR, please read the manual
carefully before using.
Caution
1. Please insert the memory card to the Car DVR and format it. Please insert the card
according to the correct direction to avoid damaging the TF card or Car DVR.
2. It is suggested to regularly backup the recorded files from the card every week.
3. Please charge the Car DVR for the first time use.
4. Please note that this Car DVR is not waterproof.
5. Please do not use it in dusty environment to avoid damaging the Lens
6. Please do not use it in the high-intensity of magnetic field environment.
1.0 STRUCTURE
1. 12 V power 2. Bracket slot 3.USB outlet 4. Audio output 5.heat dissipation hole
6. Lens 7. TF card slot 8. Reset key 9. Power key 10. Menu Key
11. Mode key 12. Charging LED 13. Status LED 14. Up key 15. OK key
16. Down key 17. Microphone 18. IR LED
2.0 FEATURES
1. Supports 720P and VGA resolution with avi video format.
2. Built-in microphone/speaker
3. Support up to 32GB MicroSD card (TF)
4. Supports loop recording for seamless video
5. Supports motion detecting
3.0 OPERATION GUIDE
3.1 Power on/off
The Car DVR can be turned on by either long-pressing the POWER key or simply
connected it with the car charger to automatically power it on. After power on, the Car DVR
will enter the video mode automatically and start recording if the MicroSD card is already
inserted. The Status LED would start to flash in green color indicating recording. After
switching off the car’s engine (or unplug the car charger from the car DVR), the Car DVR
will record for another 5 seconds and then turn off automatically.
Remark: If there is no SD card inserted, the LCD screen would display "No card" after turn
on.
3.2 Shutdown
To turn off the camera, please long press the POWER key.
Remark: when battery power is insufficient, the screen will show “low battery”, then the Car
DVR will turn off and save the video files automatically.
3.3 Battery charging
There are two charging methods:
1Charging by USB cable.
2 ) Charging by car charger
Remark: The red POWER LED will be on during charging and the red LED light will be off
when it is fully charged.
3.4 Install and Remove a memory card
Insert the MicroSD card into the MicroSD card slot.
To remove the card, simply push the memory card inside first then it will be ejected out.
Please note that the SD card itself is directional. So please insert it in the correct way.
3.5 Video
Press the POWER key to start and enter into the video recording mode directly. While the
green Status LED flashes, you can press the “OK” key to stop the recording and save the
video file. Then this Car DVR is now under “Standby mode”.


Specyfikacje produktu

Marka: Ednet
Kategoria: kamera samochodowa
Model: Dash Cam HD 87231

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ednet Dash Cam HD 87231, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kamera samochodowa Ednet

Instrukcje kamera samochodowa

Najnowsze instrukcje dla kamera samochodowa

JVC

JVC KV-DR305W Instrukcja

15 Października 2024
Mio

Mio MiVue Mirror R30 Instrukcja

14 Października 2024
Kenwood

Kenwood DRV-A610W Instrukcja

9 Października 2024
EchoMaster

EchoMaster MRCHDDVR2 Instrukcja

9 Października 2024
Pioneer

Pioneer VREC-200CH Instrukcja

9 Października 2024
Pioneer

Pioneer AD-PLF100 Instrukcja

9 Października 2024
Uniden

Uniden Dash View 50R Instrukcja

9 Października 2024
Minolta

Minolta MNCD245T Instrukcja

8 Października 2024