Instrukcja obsługi Edelkrone JibONE v2


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Edelkrone JibONE v2 (1 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Before operating your edelkrone,
please watch the users manual video.
http://edel.kr/jbnv2
1. WHAT’S IN THE BOX & THE BASICS
2. MOUNTING ON A TRIPOD
3. MOUNTING THE BATTERY BRACKET
4. ATTACHING THE COUNTERWEIGHT
5. PULLING OUT THE EXTENSIONS
6. ADJUSTING THE OPERATION ANGLE
7. ATTACHING THE CAMERA
8. BALANCE ADJUSTMENT & SAFETY LOCK
9. EXTENSION LENGTH INDICATORS
10. COUNTERWEIGHTS
11. TENSION ADJUSTMENT
12. TURNING ON JIBONE v2
13. LOOSENING THE KNOBS
14. WARNINGS
15. START USING
TABLE OF CONTENTS
1. WHAT’S IN THE BOX & THE BASICS 2. MOUNTING ON A TRIPOD 3. MOUNTING THE BATTERY BRACKET 4. ATTACHING THE COUNTERWEIGHT 5. PULLING OUT THE EXTENSIONS 6. ADJUSTING THE OPERATION ANGLE 7. ATTACHING THE CAMERA
1.
2.
3.
4.
5.
6.
JibONE v2
Motor unit (with information screen,
On/Off button, DC in, shutter
trigger port, battery bracket port)
JibONE v2 length extension screws
Tension adjustment wheel
Angle adjustment knob
Camera plate (with 3/8” mounting
screw and spirit level)
7.
8.
9.
10.
11.
Body (3/8” tripod mounting port, 1/4
accessory port, Cold Shoe)
Safety lock
Shutter trigger extension cable
Main counterweight (1 kg/2.2 lbs)
Counterweight (1 kg/2.2 lbs) (3 pcs.)
1
10 11
1
Battery Bracket
Motor Unit
9
2
3
4
8
7
65
1. Place the body of JibONE v2 on the tripod
making sure it's aligned.
2. Tighten it by turning the mounting wheel.
1. Align the main counterweight parts as shown.
2. Attach to JibONE v2 by turning the butterfly screw clockwise.
Attach the battery bracket to the motor unit using the screws included with
the battery bracket.
1. Lift the lever above to release the top arm.
2. Repeat below to release the bottom arm.
3. Grip the camera plate bar to pull out the extensions.
4. Extend the camera plate by loosening the butterfly
screw.
5. Push the levers back to their original positions.
1. Loosen the angle adjustment knob by turning counterclockwise.
2. Adjust your operation angle (JibONE v2 has five different operation angles).
3. Tighten the angle adjustment knob back.
1. Align your FlexTILT Head v3 or any tripod head with the camera plate as shown.
2. Tighten the mounting wheel.
3. Attach your camera to your FlexTILT Head v3 or any tripod head.
1
1
23
1
2
3
4
2
*Battery Bracket sold separately.
2
CAUTION
Keep hands clear of moving profiles.
A detailed video explaining the mounting process can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to mount the battery bracket can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to attach the counterweight can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to extend JibONE v2 can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to adjust the operation anglev can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to attach the camera can be found at:
http://edel.kr/jbnv2


Specyfikacje produktu

Marka: Edelkrone
Kategoria: nieskategoryzowany
Model: JibONE v2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Edelkrone JibONE v2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Edelkrone

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024