Instrukcja obsługi Ecler VEO-SWC44

Ecler przełącznik VEO-SWC44

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ecler VEO-SWC44 (1 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
SPECIFICATION:
MODEL NO. : IMC-4500
POWER CONSUMPTION : 1300W
RATED VOLTAGE : 230Va.c. 60Hz
BOX DIMENSION : 345*255*345mm
UNIT DIMENSION : 350*318*253mm
GROSS WEIGHT : 3.3kg.
UNIT WEIGHT : 2.8kg.
IMPORTANT SAFEGUARD:
1. Read all instructions carefully.
2. Before using the unit, check if the voltage indicated corresponds with the convenience outlet (230Va.c.).
3. Do not use a two-way socket with another appliance.
4. Do not use any appliance with a damaged cord or plug. If the cord is damaged it should be replaced with
the same type and size or bring the unit to the nearest authorized service center.
5. Do not place the unit near a gas stove, an electric burner, in a heated oven, or near a hot surface.
6. Place the unit on a stable surface; keep it away from the edge of the counter to avoid accidents.
7. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliances by a person responsible for their safety.
8. Children should be supervised to ensure that they do not play with the appliance.
9. Extreme caution must be exercised when using an appliance containing boiling liquid in the multi-cooker.
10. Do not allow the cord to touch the hot surface of the unit.
11. For protection against electric shock, do not immerse the unit including the base unit in water or any other
liquid.
12. Remove the unit from the base unit before lling or pouring. Do not attempt to remove the unit from the
base unit until it is switched o. Use the appliance only with the supplied base. Do not use the base unit for
other purposes.
13. Always ensure that the lid is closed and do not lift it while the liquid in the multi-cooker is boiling. Scalding
may occur if the lid is removed during the cooking cycle. Do not touch the hot surfaces of the multi-cooker.
14. Allow the unit to cool down before moving or cleaning.
15. Not intended for outdoor use.
16. No parts are dishwasher safe.
17. Do not cook food below the recommended minimum ‘MIN’ level or above the maximum ‘MAX’ level. Boiling
water or liquid may come out of the multi-cooker. If the multi-cooker is overfilled, boiling liquids may spill out
that may cause accidents or injuries.
18. Carry or move the multi-cooker only by its handle.
19. In case of malfunctions, please bring the multi-cooker to the nearest Authorized Imarex Service Center.
20. Do not operate the unit without any water or liquid.
21. Do not touch the heating plate when the appliance is plugged into the convenient outlet.
22. Avoid water spillage into the socket, connector, cord, power base and alike.
23. Do not immerse the unit body and base unit in water or any other liquid.
24. Multi-cooker steamer may get very hot, be careful when handling.
25. Do not leave the appliance unattended while the unit is in use to avoid accidents or any damage to the unit.
26. Extra caution must be exercised when using the appliance for steaming, a large amount of steam will shoot
out of the steam hole
27. Unplug the unit every after use and before moving or cleaning the appliance.
28. Use of accessories or equipment not supplied by the manufacturer may cause damage or malfunctioning
of your appliance or result in injuries.
29. For household use only, not intended for any business purposes.
30. Do not use this unit other than its intended use.
31. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must
not be supplied through an external switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
DESCRIPTION OF PARTS
FOR INITIAL USE:
1. Make sure that all the accessories are intact.
2. Clean the inner pot and steamer with a cotton cloth.
3. To disinfect the unit, kindly ll the pot with water up to the ‘MAX’ level and let it boil for about 20
minutes.
HOW TO USE
NOTE: Heat light indicator will light up indicating that temperature start heating up, when the
temperature reaches the set temperature, the power light indicator will turn o and will light up once
the temperature has decreased.
1. Place the unit on a at and stable surface.
2. Pour the ingredients into the inner pot.

Specyfikacje produktu

Marka: Ecler
Kategoria: przełącznik
Model: VEO-SWC44

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ecler VEO-SWC44, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje przełącznik Ecler

Ecler

Ecler VEO-SWC44 Instrukcja

8 Października 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

Netgear

Netgear GS110TPP Instrukcja

15 Października 2024
ZyXEL

ZyXEL SFP-LHX1310-40-D Instrukcja

14 Października 2024
Tripp Lite

Tripp Lite B005-DPUA4 Instrukcja

11 Października 2024
Lancom

Lancom CS-8132F Instrukcja

9 Października 2024
Lancom

Lancom YS-7154CF Instrukcja

9 Października 2024
TP-Link

TP-Link Festa FS328G Instrukcja

9 Października 2024
Totolink

Totolink SW24DM Instrukcja

9 Października 2024
Totolink

Totolink SW1008P Instrukcja

9 Października 2024
Totolink

Totolink SW24G2 Instrukcja

9 Października 2024
Cudy

Cudy FS1006P Instrukcja

9 Października 2024