Instrukcja obsługi Ecler SAMI-402

Ecler odbiornik SAMI-402

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ecler SAMI-402 (4 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
ECLER TECHNICAL DATA SHEET
96 004 01 402 EN- 6- 00 -SAMI
1
SAMI- 402
ANALOGUE PREAMPLIFIERS & MIXERS
Installation Mixers
PRODUCT OVERVIEW
SAMI-402 is an installation audio mixer in standard rack format, featuring 3 MIC/LINE Stereo inputs, 1 LINE Stereo
input, 1 main mix output and one AUX/REC additional output. It includes a 3 band tone control section, Talkover (priority)
function assignable to each MIC/LINE input over the mix bus, ST/MONO mix switch and MUTE port for external dry
contact triggering.
KEY FEATURES
4 input channels, 2 outputs 19” installation mixer.
3 MIC/LINE stereo . inputs
1 LINE stereo . input
1 main mix output and one AUX/REC additional output
3 band tone control section.
Talkover (priority) function assignable from each MIC/LINE
input over the mix.
Micro sensitivity level can be adjusted on the back panel.
+18V Phantom Power available for all MIC inputs.
MUTE remote control input enabled by external dry contact
closure for connecting fire detection systems and other
safety devices.
Universal external power supply (multi-plug)
APPLICATIONS
Retail
Hospitality
Education
Corporate
Sport & Wellness
ECLER TECHNICAL DATA SHEET
2
TECHNICAL SPECIFICATIONS
SAMI 402-
ANALOGUE AUDIO INPUT PORTS
Number of input ports
3, MIC/LINE
1, LINE
Connection type
MIC: 3-pin Euroblock
LINE: RCA
Input sensitivity
LINE 1 3: 0dB-
LINE 4: 0dB/-6dB (internally selectable)
MIC 1- - 3 BAL: 35dB
Input sensitivity adjust
MIC/LINE: ±15dB
Input impedance
LINE 1-3: 50kΩ
LINE 4: 50kΩ
MIC 1- 3 BAL: >1kΩ
CMRR
MIC: >60dB @ 1 kHz
Phantom voltage
+18VDC
ANALOGUE AUDIO OUTPUT PORTS
Number of output ports
1 main mix output
1 AUX/REC output
Connection type
Main: 3-pin Euroblock
AUX/REC: RCA
Output type
1 STEREO/2 MONO main mix output
1 STEREO AUX/REC
Nominal output level
OUT: 0dB/+6dB (internally selectable)
AUX/REC: 0dB/+6dB (follows MAIN OUT, when
AUX OUT=POST)
Output impedance
OUT: 600Ω
AUX/REC: 10kΩ
SIGNAL
Frequency response
LINE: 10Hz 1dB- -50kHz
MIC BAL: 10Hz- - 30kHz 1dB
THD + Noise
LINE: <0.005%
MIC BAL: <0.04%
Signal oise ration
LINE: >100dB
MIC BAL: >85dB
DEVICE CONTROL
Tone Control
3-way tone control
Tone Frequency Cut
BASS: 100Hz ±15dB
MID: 2kHz ±15dB
TREBLE: 10kHz ±15dB
Talkover
TIME: 2 seconds
EFFECT: 30dB-
Control Buttons
Power ON, Talkover, LINE/MIC, L+R (output), Gain
knob, Volume knob
Status Indicators
Power ON LED, MUTE LED, Vu meter LEVEL LEDs-
REMOTE CONTROL CONNECTIONS
GPIs
MUTE control port NO/NC
ECLER TECHNICAL DATA SHEET
3
ELECTRICAL
Power supply
±17.5VDC External PSU
AC mains requirement
100 240 V @ 50 60Hz (External PSU: 17.5VDC)- -
AC mains connector
IEC inlet connector
Power consumption
10.8VA / 4.5W
Cooling
Passive
PHYSICAL
Operating temperature
Min: - 10°C ; 14°F
Max: 40°C ; 104°F
Operating humidity
<85% HR
Storage temperature
Min: - 10°C ; 14°F
Max: 40°C ; 104°F
Storage humidity
<90% HR
Installation options
19" rack format (1RU)
Included accessories
±17.5VDC multi- plug PSU, EuroBlocks,
Rubber Foot, Mini Jumpers
Dimensions (WxHxD)
482. 44 x 153.7 1.73 x 055 x mm / 19 x 6. in
Weight
1.75 kg / 3.86 lb
Shipping dimensions (WxHxD)
560 x 60 x 295 mm / 22.05 x 2.36 x 11.61 in
Shipping weight
2.45 kg / 5.40 lb


Specyfikacje produktu

Marka: Ecler
Kategoria: odbiornik
Model: SAMI-402

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ecler SAMI-402, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik Ecler

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik