Instrukcja obsługi EC Line EC-80320

EC Line drukarka etykiet EC-80320

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EC Line EC-80320 (48 stron) w kategorii drukarka etykiet. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/48

EC-80320 User’s Manual

- i -

The Guide

Be sure to have read the manual seriously before your operation. Neither EC PRINTER nor

its affiliates shall be liable to the purchaser of this product or third parties for damages,

losses, costs, or expenses incurred by purchaser or third parties as a result of: accident,

misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to

this product, or failure to strictly comply with EC PRINTER’s operating and maintenance

instructions.

 Follow the notices and warnings carefully to avoid seriously bodily injury.

 Don’t touch the thermal head with your hand and other solid object at any moment to

avoid your body burned or the thermal head damaged.

 Be careful the dentate cutter when you replace the paper.

 You are forbidden to clean the printer with alcohol or other liquid when the printer is

connected to the power, pull the plug out when which is processed, using the soft cloth

instead of the hard object.

 Please don’t use the printer near the liquid.

 Make sure that the printer is connected to a reliable power outlet. It should not be on the

same electric circuit as copiers, refrigerators, or other appliances that cause power

spikes.

 Make sure the printer is far away from the appliance that can arouse electromagnetic jam,

such as loudhailer.

 The power outlet you plan to connect to should be nearby and unobstructed.

 Make sure that the surrounding area is clean, dry, free of dust and not exposed to direct

sunlight.

 Don’t remove the printer’s out-cover and repair the printer。

。

。。When needed, call or take it

to the professional.

 Make sure to set the power switch OFF when connects the printer to the power or

computer.

 When the following error or problem occurred, please contact the professional or dealer:

A：

：

：：The power cable is damaged or broken.

B：

：

：：The printer is sloppy by some liquid.

C：

：

：：The printer didn’t work when you operate according the manual.

D：

：

：：The printer out-cover is broken.

E：

：

：：The specification or print quality is going wrong obviously, need repaired.

Warning: In order to ensure the use life of printer, strictly prohibit printing full line full

black exceed than 2 CM.

Notice: The contents of this manual are subject to change without notice.

*All the part of the printer can be recycled. When it is abandoned, we can callback it

freely. Please contact us when you abandon it.

EC-80320 User’s Manual

- ii -

Table of contents

The Guide.................................................................................................................................................i

Chapter 1 Introduction...........................................................................................................................1

1.1 Features..........................................................................................................................................1

1.2 Part Description ..............................................................................................................................1

1.3 Parts Identification ..........................................................................................................................1

Chapter 2 Connecting Cables ...............................................................................................................3

2.1 Unpacking.......................................................................................................................................3

2.2 Unpack the Protect Materials ..........................................................................................................3

2.3 Connecting to Your Computer or Other Equipment.........................................................................3

2.3.1 Connecting the Parallel Interface Cable ...................................................................................3

2.3.2 Connecting the Serial Interface Cable (Optional) .....................................................................4

2.3.3 Connecting the USB Interface Cable........................................................................................4

2.3.4 Connecting the Drawer Cable ..................................................................................................5

2.3.5 Connecting the Ethernet Cable ................................................................................................5

2.4 Connecting the Adapter ..................................................................................................................6

2.5 Setup the Print Driver and Select the Cutter ...................................................................................6

2.6 Network Settings.............................................................................................................................9

2.6.1 Connecting Printer....................................................................................................................9

2.6.2 Setting IP Address....................................................................................................................9

2.6.3 Installing Printer Network Driver.............................................................................................12

Chapter 3 Base Control Panel Operations .........................................................................................19

3.1 Control Panel ................................................................................................................................19

3.1.1 Indicator .................................................................................................................................19

3.1.2 KEY........................................................................................................................................19

3.2 Self-Printing ..................................................................................................................................19

3.3 HEX DUMP PRINTING.................................................................................................................20

3.4 Restoring Factory Printer Settings ................................................................................................20

3.5 Setting Slip Stitch ..........................................................................................................................20

3.6 Online-aptitude Parameter Settings..............................................................................................20

Chapter 4 Install and Replace the Roll Paper.....................................................................................22

4.1 Paper Installed Steps ....................................................................................................................22

Chapter 5 Features...............................................................................................................................24

5.1 General Specification....................................................................................................................24

5.2 Interface Features.........................................................................................................................25

5.2.1 Parallel Interface ....................................................................................................................25

5.2.2 Serial Interface (Optional) ......................................................................................................26

5.2.3 USB Interface.........................................................................................................................27

5.2.4 Drawer Connector ..................................................................................................................27

5.2.5 Power Supply Connector........................................................................................................28

5.2.6 Ethernet Connector ................................................................................................................28

Chapter6 Troubleshooting and Maintenance.....................................................................................29

6.1 Maintenance .................................................................................................................................29

6.2 Error Message on the Control Panel.............................................................................................29

6.3 Cutter Jammed or Error ................................................................................................................29

Chapter 7 Control Commands.............................................................................................................31

7.1 General .........................................................................................................................................31