Instrukcja obsługi EBS Metal Drive II

EBS Niesklasyfikowane Metal Drive II

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EBS Metal Drive II (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
USERS MANUAL
B L SLACK ABEL ERIES
EBS M DETAL RIVE
SAMPLE OUND ETTINGSS S
The following examples below show a few of the many sonic
possibilities of the EBS MetalDrive.
MODERN METAL
FULL METAL DRIVE
METAL OVERDRIVE
MY PERSONAL SOUND
T
.
T
.
The tubesim mode activates the second tube
simulator giving higher compression, less
attack and tube-like sounds. This position is
useful for edging up your sound while
obtaining the warmth and body of the classical
vintage tubes.
his is the fullrange distortion mode, useful for
affecting the overall sound. This mode gives
less low end with harder compression and gives
the possibility to create fuzz-like sound when
tweaking the Dist
his is an example of a standard distortion
setting with a good clean edgy sound together
with untouched low end for better definition.
Use high setting for Dist and compensate the
level with the Output
Thank you for purchasing the
is an ultra compact and
robust box, capable of producing high gain
distortion and many other useful mean
“tubeamp”, distorted sounds. The overdrive
engine that makes this all possible is a
simulation circuit
, which emulates a classic vintage style
preamp tube. The EBS MetalDrives’ high quality
makes this pedal a perfect choice for the
recording environment, as well as live
playing.
pedal.
in pure class A with a wide gain
range
EBS Black Label MetalDrive pedal!
The EBS MetalDrive
We hope you'll enjoy using the
EBS MetalDrive
TUBESIM
STANDARD
FLAT
- Activates the second tube simulator, which adds
extra harmonics with added compression and slightly less high
end attack. Very useful when using moderate Dist setting for
tightening up your sound. Otherwise this mode works the
same as standard mode.
(STD) - This mode selects the standard operation
for the pedal. It bypasses the low end for excellent bass
response. Very high gain settings are possible and very useful,
with great dynamics and typical tube-like sounds.
- This position selects linear gain across the entire audio
spectrum. Useful for heavily distorted bass sound. This mode
also produces some fuzz-like sounds when used with high Dist
setting.
I LEDNDICATOR
Indicates when the pedal is active.
This LED should glow when the pedal in switched on. When this LED stops
lighting you should replace the battery as soon as possible.
F SOOT WITCH
Switches the pedal on or off. This switch is a TRUE BYPASS SWITCH for optimum
performance.
T CHE ONTROLS
- Controls the output
volume when the
pedal is active.
You can also use this
control to boost your
sound.
- Controls the amount
of gain and distortion
for the “distortion
engine”. The gain
ranges from half clean
up to
in maximum
position.
very distorted
sound
EBS PROFESSIONAL BASS EQUIPMENT
H C BOW TO HANGE ATTERY
1) Carefully remove the four screws holding the bottom plate.
2) Remove the bottom plate gently.
3) Replace the old battery with a new one of the same type, 9V alkaline
type; 6LR61.
4) Gently place back the bottom plate, and make sure no cables are
squeezed. Attach the four mounting screws using moderate tension.
The EBS Phantom Power System™ makes it
possible to power the EBS MetalDrive with 9V
DC directly from the EBS NeoDrome,
NeoGorm, Fafner, HD350 and TD650 amps.
Here is a step-by-step instruction on how to do
H EBS P P ™OW TO USE THE HANTOM OWER
1) Connect a stereo ¼” instrument cable (TRS, tip-ring-sleeve) between
the EBS MetalDrive pedal and the EBS amp.
2) Activate the phantom power on the amp. This is made with a flick of
a switch on most EBS amps. Please consult the manual for the EBS
amp you are using.
3) Connection done. You should now have power in the pedal, even if
the input jack is left open.
EBS P P T SHANTOM OWER ROUBLE HOOTING™
Note that only the pedal that is directly connected to the EBS amp can be powered
with phantom power. This means that if you have more than one pedal, ONLY THE
LAST one can use the EBS Phantom Power™.
Checkpoint
1) Is a ¼” STEREO cable used between
the pedal and the amp?
2) Is there power available on the
RING connection of the ¼” plug?
T S GROUBLE HOOTING UIDE
Please consult the following checkpoints, before consulting one of the
authorized EBS service centers.
*EBS Sweden AB guarantees no error free operation when using a DC
adapter other than the EBS AD-9. Warranty is void if higher voltage than
9.3 V has been used to power the EBS MetalDrive pedal.
Action if answered NO
- Replace cable to a ¼” STEREO cable.
- Make sure the phantom power is
activated on the amp.
- Check cable.
Checkpoint
1) Does the cable(s) work
properly?
2) Are the ¼” plugs properly
connected all the way in?
3) Are the Instrument cable
attached to the Right (input)
jack, and the Amp cable
connected to the Left (output)
jack?
4) Does the pedal have a battery,
and is the battery OK?
5) Does the indicator LED light
When pressing the foot switch
alternatively?
6) Does the instrument work?
7) Does the amplifier work and is
the volume turned up?
8) If you are using a DC adapter,
Are you using an EBS AD-9?
Action if answered NO
- Replace cable(s).
- Push the ¼” plugs all the way in.
- Reconnect input and output jacks.
- Put a new battery in the pedal.
- Replace battery.
- Check the instrument at your
nearest service center.
- Turn up volume or check the amp
at your nearest service center.
- Check the voltage and polarity of
the adapter you are using.*
TECHNICAL SPECIFICATIONS ETALEBS M DRIVE
Nominal Input Level - 8 dBv
Power Requirements 9 V DC Regulated,
18 mA max*.
Dimensions Width
Height
Depth ( )
Weight 480g (1.07 lb.)
Input Impedance 700 kohms
Dry Bandwidth +0/-3 dB 20 - 20k Hz
Effect Bandwidth +0/-3 dB 60 - 7k Hz
Dist Gain Range 6 - 70 dB min
Types Standard, Flat or
Tubesim Mode
70 mm (2.8")
115 mm (4.5")
35 mm 1.4"
Specifications are subject to change without notice.
EBS Sweden AB · Grindstuvägen 44-46 · SE-16733 Bromma · Sweden
Phone: +46-8-7350010 · Fax: +46-8-7350005
Web: http://www.ebssweden.com
E-mail: ebs.info@bass.se
U HSEFUL INTS
In order to obtain best possible performance and operation from
the EBS MetalDrive, check the hints below on how to improve and
find your own personal sound.
1) Try using the MetalDrive pedal as one of the first pedals
in your effects chain. This is because the gain stage will
amplify every small noise from other pedals being used
before the MetalDrive.
2) The MetalDrive is excellent for use in an effects loop. In
this setup you can use the pedal as a post-filter
enhancement stage. It could be a good choice to make
your solid state amplifier sound like a full tube amp.
*EBS recommends the use of the EBS AD-9 power supply,
which supplies a well stabilized power to the EBS MetalDrive
and all your other pedals that operate with a 9V battery. The
high current capacity, 650mA, makes it possible to supply all
pedals with only one adapter, EBS AD-9!
GND PH.
POWER.
SIGNAL

Specyfikacje produktu

Marka: EBS
Kategoria: Niesklasyfikowane
Model: Metal Drive II

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z EBS Metal Drive II, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane EBS

EBS

EBS BassIQ Instrukcja

24 Września 2024
EBS

EBS Reidmar 750 Instrukcja

23 Września 2024
EBS

EBS Metal Drive II Instrukcja

23 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024