Instrukcja obsługi Earthworks TC30

Earthworks mikrofon TC30

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Earthworks TC30 (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Product Registration

To help you get the most out of your

Earthworks purchase, please take a moment

and register your product with us online at

earthworksaudio.com/register.

Service & Repair

If you have any problems with your Earthworks

products, please contact our Service & Repair

Department.

Email: returns@earthworksaudio.com

Telephone: (603) 654-2433, ext. 119

MADE IN USA

Printed in USA

User’s Guide

™

earthworksaudio.com

July 11, 2018

Pin 1

“Shield”

Pin 2

“+”

Pin 3

“ ”-

Description

The Earthworks TC30 is an omnidirectional (pressure)

pre-polarized condenser microphone directly coupled to

a dedicated wideband, low output impedance pream-

plier. The TC30 requires a standard 24-48V phantom

power supply. It features a linear free-eld frequency re-

sponse from 9Hz to 30kHz, fast impulse response, very

low handling noise, uniform polar pattern, and very high

SPL handling capabilities. It exhibits no proximity effect.

Each microphone is delivered with its own calibration

chart providing the individually measured frequency re-

sponse curve. A mounting clip is included with the mi-

crophone.

Applications

The Earthworks TC30 is easy to operate. Connect the

microphone to a microphone preamplier supplying 24-

48V phantom power using a standard XLR microphone

cable. Please allow up to one minute for the microphone

to settle. Plugging in the microphone “hot” (phantom

power already present at the input) will not damage the

microphone, and is actually preferred for faster settling.

It is normal for any phantom powered mic to “pop” when

plugged in or powered up. Make sure to mute the signal

to speakers or headphones when phantom power is rst

applied.

The TC30 is an excellent general-purpose omni mi-

crophone. It is an ideal choice for close miking louder

sources like guitar, bass, piano, horns, and percussion.

The TC30 is very popular for drum overheads. It is in-

credibly clean and distortion-free up to 150dB SPL while

simultaneously capturing subtle details. Its fast, clean

impulse response yields remarkably transparent sound.

The TC30 is an excellent room mic for ambiance in the

studio and for recording rehearsals and performances.

It has no handling noise, no proximity effect, and is very

forgiving in terms of placement.

This microphone has no removable parts.

Care of Microphone

The Earthworks TC30 microphone is a precision instru-

ment designed and built to provide years of excellent

performance. Following these simple rules will help to

protect your investment in the TC30:

Avoid touching the front protective screen.

Never attempt to disassemble the microphone –

it cannot be opened.

Avoid extreme heat and condensing humidity.

Allow the microphone to warm up in the case when

bringing it in from the cold weather.

Rough handling may damage the microphone even

if no visible marks are left.

When not in use keep the TC30 in its case.

•

XLR Output Connector Assignment of TC30

Specications

Frequency response: 9Hz to 30kHz +1/-3dB

Polar Pattern: Omnidirectional

Sensitivity: 8mV/Pa (Typical)

Power Requirements: 24-48V Phantom, 10mA

Peak Acoustic Input: 150dB SPL

Output: XLR-3

Output Impedance: 65Ω, balanced between pins 2 & 3

Minimum Load: 600Ω btw. pins 2 & 3

Noise: 26dB, A equivalent

Dimensions L x D: 229 x 22 mm (9 x .860 in.)

Weight: 225g (.5lb)

Impulse Response of TC30 (typical)

Polar Response of TC30 (typical)

Specications are subject to change without notice.

Frequency Response of TC30 (typical)

Specyfikacje produktu

Marka:	Earthworks
Kategoria:	mikrofon
Model:	TC30
Kolor produktu:	Stal nierdzewna
Wysokość produktu:	229 mm
Technologia łączności:	Przewodowa
Częstotliwość mikrofonu:	9 - 30000 Hz
Czułość mikrofonu:	-42 dB
Impedancja mikrofonu:	65 Ω
Typ kierunku mikrofonu:	Wielokierunkowy
Interfejs urządzenia:	XLR-3
Model:	Mikrofon instrumentalny
Zużycie energii:	10 mA
Liczba dołączonych produktów:	2 szt.
Wyjście XLR:	1
Waga mikrofonu:	225 g
Średnica:	22 mm
Zawiera zacisk:	Tak
Czułość (1 kHz):	8 mV/Pa
Maksymalny poziom ciśnienia akustycznego (1 kHz):	150 dB
Zasilanie Phantom:	24 - 48 V
Równoważny poziom hałasu:	26 dB