Instrukcja obsługi Earthworks SR25

Earthworks mikrofon SR25

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Earthworks SR25 (3 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

For more information, please visit

www.earthworksaudio.com or call 1-603-654-2433.

CARDIOID MICROPHONE FOR GUITAR

S R 2 5

The small tip on many of our microphones allows them to capture the highest frequencies of

your sound. Please be gentle and considerate when handling the microphones with these tips.

(Microphones such as the SR314 and SR40V shield the tip within their capsule, and are thus

more durable.)

1 SR25

1 Microphone Clip

1 Microphone Bag

1 Foam Windscreen

1 Tip Protector

YOUR PURCHAS E INCLUDES

Thank you for purchasing the

Earthworks SR25 Condenser Microphone!

Before setting up the microphone, pull back all existing settings and EQ. By doing this, you will have a

baseline understanding of how our microphones sound, and will then be able to adjust accordingly.

Begin by removing all included components from the packaging. Make sure to mute any incoming

signal to speakers or headphones to avoid any loud “pops” when connecting.

Connect the microphone to an audio interface supplying 24-48V phantom power using a standard

XLR cable. Please allow one minute for the microphone to settle. (Plugging in the microphone while

phantom power is turned on will not damage the microphone, and will actually settle the microphone

faster.)

To guarantee your microphone provides years of performance, follow these guidelines:

• Avoid touching the front protective screen.

• Never attempt to disassemble the microphone.

• Avoid extreme heat and condensing humidity. Allow the microphone to warm up when bringing it

in from the cold.

• Rough handling may damage the microphone even if no markings are visible

• When not in use, keep the SR25 in its bag.

GET TI N G S TA RTE D

PR OPE R

M A I N TE N A N C E

IMPORTA N T

NOTI C E

If you encounter issues while using your Earthworks Audio microphone, please make sure that:

• Your microphone is connected to an active power supply.

• Phantom power is being supplied to the microphone.

• Your microphone and XLR cable are well connected.

• The microphone is positioned at an appropriate distance from the sound source.

• External noise in your recording environment is kept to a minimum.

• Your recording space is at room temperature and free of dust.

If your issue persists after checking, please contact us via our website.

T R O U B L E S H O O T I N G

S P E C I FI C AT I O N S SR25

Frequency Response 20Hz - 20kHz ±2dB at 30cm

Polar Pattern Cardioid

Sensitivity 10mV/Pa

Power Requirements 24-48V Phantom, 10mA

Peak Acoustic Input 145dB SPL

Output XLR-3

Output Impedance 65Ω, balanced between pins 2 & 3

Minimum Output Load 600Ω, balanced between pins 2 & 3

Noise 20dB SPL (A weighted)

Dimensions L x D 165 x 22 mm (6.5 x .860 in.)

Weight 160g (.35lb)

WA R R A N T Y All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at:

earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our

warranty/repair department by email at: service@earthworksaudio.com.

NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/

received second-hand, please contact us via our website.

W E ' R E H E R E

T O H E LP

For anything else, we're a phone call or email away. Please feel free to contact us by email at

info@earthworksaudio.com, or by phone at (603)-654-2433.

37 Wilton Rd. Milford, NH 03055

(603) 654-2433

info@earthworksaudio.com

earthworksaudio.com

Specyfikacje produktu

Marka:	Earthworks
Kategoria:	mikrofon
Model:	SR25
Kolor produktu:	Stal nierdzewna
Wysokość produktu:	165 mm
Technologia łączności:	Przewodowa
Częstotliwość mikrofonu:	20 - 25000 Hz
Czułość mikrofonu:	-40 dB
Impedancja mikrofonu:	65 Ω
Typ kierunku mikrofonu:	Kardioid
Interfejs urządzenia:	XLR-3
Model:	Mikrofon instrumentalny
Zużycie energii:	10 mA
Liczba dołączonych produktów:	1 szt.
Wyjście XLR:	1
Waga mikrofonu:	160 g
Średnica:	22 mm
Zawiera zacisk:	Tak
Czułość (1 kHz):	10 mV/Pa
Maksymalny poziom ciśnienia akustycznego (1 kHz):	145 dB
Zasilanie Phantom:	24 - 48 V
Równoważny poziom hałasu:	20 dB