Instrukcja obsługi Eartec EPak

Eartec Niesklasyfikowane EPak

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Eartec EPak (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
Safety
1. To prevent possible hearing damage, do not listen at high volume levels for long periods.
2. Risk of explosion if battery is replaced by an incorrect type, dispose of battery according to
the instruction.
3. Recycle your products
The WEEE logo (shown at right) appears on the product to indicate that this product must not
be disposed of or dumped with your other household wastes. You are liable to dispose of all
your electronic or electrical waste equipment by transporting to an appropriate collection
point for recycling of such hazardous waste.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
IC Warning:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of
the device.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter.
FCC Notice
This device complies with Part 15 of FCC rules. Operation is subject to the following 2
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation. Changes
or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Warranty
Eartec items are warrantied against defects in material and/or factory workmanship
for a set period from the date of purchase. Standard repairs due to misuse or wear
and tear, as well as replacement parts including but not limited to batteries, padding,
USB cable, etc. are excluded. Shipping to is at customer’s expense, Eartec Eartec will
pay for return ground shipping if the product warranty applies to the repair. Call for
details.
Shipping
Prior to returning your headset for warranty or service you must call Eartec for an RA
(return authorization) number: 1.800.399.5994.
General Service
All repair work will be performed for the cost of replacement parts and return
shipping from the Eartec factory.
Service / Eartec www.eartec.com
145 Dean Knauss Drive 1.800.399.5994
Narragansett, RI. 02882
The
Communicate in Total Comfort
Full Duplex Wireless
IMPORTANT
E-Pak intercoms include one MAIN transceiver.
When the MAIN unit is ON all radios in the system will link automatically.
Push battery door up,
then slide out to open.
Red = Charging
Green = Charged
Charge time appx. 3 hours
Programming
Button / Blue LED
Green LED
Power Button
Volume Up / Down
GREEN LED - Power & System Status Indicator
The green LED serves a dual purpose:
A flashing green LED means that the power is on, but the E-Pak is not connected to any
other transceiver.
A solid green LED indicates the E-Pak is powered on and is also sending & receiving
wireless signals with one or more E-Pak radios.
BLUE LED - -Pairing Wireless Headsets to the E Pak
Linking Previously Paired Headsets
Each wireless headset is factory programmed to an individual E-Pak. The headsets and
transceivers are numbered accordingly.
Upon start Pak radios enter search mode (indicated by flashing blue Programming - -up E
Button). When the radio “finds” the headset to which it has been previously paired the
LED turns solid blue indicating connection.
If the radio fails to link with its previously paired headset within 60 seconds the blue LED
turns off.
Linking a New Headset
When a wireless headset is not paired the blue LED is dark.
To connect a headset first set the E-Pak radio to programming mode by holding the
programming button until the blue LED illuminates and flashes rapidly.
Next, set the selected headset to pairing mode (alternating red & blue LEDs).
When the radio and headset successfully connect, the E-Pak blue LED turns solid.
RED LED - Microphone Mute Button
The microphone mute feature is controlled by the tactile button located on top of the
radio cabinet, labelled MIC.
Pressing the Mic button illuminates the red LED indicating the microphone signal is
muted.
Pressing the button again reactivates the mic gain and the red LED light turns off.
Red LED = Mute
Jack accommodates
Eartec wired headsets.
Battery Charger Headset Jack
Battery Compartment
The Lazer-Pro
Bone Conduction Headset
Safety
1. To prevent possible hearing damage, do not listen at high volume levels for long periods.
2. Risk of explosion if battery is replaced by an incorrect type, dispose of battery according to
the instruction.
3. Recycle your products
The WEEE logo (shown at right) appears on the product to indicate that this product must not
be disposed of or dumped with your other household wastes. You are liable to dispose of all
your electronic or electrical waste equipment by transporting to an appropriate collection
point for recycling of such hazardous waste.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
IC Warning:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of
the device.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter.
FCC Notice
This device complies with Part 15 of FCC rules. Operation is subject to the following 2
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation. Changes
or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Warranty
Eartec items are warrantied against defects in material and/or factory workmanship for a set
period from the date of purchase. Standard repairs due to misuse or wear and tear, as well as
replacement parts including but not limited to batteries, padding, USB cable, etc. are excluded.
Shipping to Eartec Eartecis at customer’s expense, will pay for return ground shipping if the
product warranty applies to the repair. Call for details.
Shipping
Prior to returning your headset for warranty or service you must call Eartec for an RA (return
authorization) number: 1.800.399.5994.
General Service
All repair work will be performed for the cost of replacement parts and return shipping from the
Eartec factory.
Service / Eartec www.eartec.com
145 Dean Knauss Drive 1.800.399.5994
Narragansett, RI. 02882

Specyfikacje produktu

Marka: Eartec
Kategoria: Niesklasyfikowane
Model: EPak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Eartec EPak, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Eartec

Eartec

Eartec Evade Instrukcja

11 Grudnia 2024
Eartec

Eartec EVADE XTreme Instrukcja

10 Grudnia 2024
Eartec

Eartec EPak Instrukcja

10 Grudnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Emos

Emos P5501 Instrukcja

11 Grudnia 2024
Ferrofish

Ferrofish A32pro Instrukcja

11 Grudnia 2024
Really Right Stuff

Really Right Stuff B2-LLR II Instrukcja

11 Grudnia 2024
Angler

Angler BB-RE-2436-V2 Instrukcja

11 Grudnia 2024
Raya

Raya LS-TT-SA Instrukcja

11 Grudnia 2024
Raya

Raya RAS Instrukcja

11 Grudnia 2024
Angler

Angler BB-ST-1024-V2 Instrukcja

11 Grudnia 2024
Ebro

Ebro GFX 460 Instrukcja

11 Grudnia 2024
Angler

Angler BB-48DB-V2 Instrukcja

11 Grudnia 2024
TP-Link

TP-Link TL-FC111B-20 Instrukcja

11 Grudnia 2024