Instrukcja obsługi Dynex DX-S1000


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dynex DX-S1000 (17 stron) w kategorii Głośniki samochodowe. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/17
USER GUIDE
GUIDE DE L’U TILISATEUR GUÍA DEL USUARIO
Car Audio Speakers
Haut-parleurs pour l’auto
Altavoces para audio de automóvil
DX-S1000
2Contents
Dynex DX-S1000
Car Audio Speakers
Contents
Introduction ......................................................................................2
Important safety instructions............................................................2
Setting up the car audio speakers......................................................2
Legal notice.......................................................................................4
Warranty ...........................................................................................5
Français .................................................... 7
Español....................................................12
Introduction
Thank you for purchasing the DX-S1000 Car Audio Speakers. Although Dynex has attempted
to make sure all of the information contained within this manual is accurate, please be aware
that any part of it is subject to change without notice.
Important safety instructions
Setting up the car audio speakers
This symbol alerts the user to the presence of important
instructions. Failure to heed these instructions can result in injury
or damage to the speakers.
If you feel unsure about installing this system yourself, have it
installed by a qualified audio technician.
Before installation, disconnect the battery negative (-) terminal to
prevent damage to the speakers, fire and/or possible injury.
The following are basic installation instructions. If you feel unsure
about personally installing this speaker system, Dynex
recommends using the services of a professional car audio
installation center.
Mounting the car audio speakers 3
Before installation, follow these guidelines:
1 Carefully read and understand the instructions before installing this product.
2 Disconnect the negative terminal from the battery before installing this product.
3 If additional wiring is needed, we recommend running all wires prior to mounting
your speaker in place.
4 Use the highest quality connectors for a reliable installation and to minimize signal or
power loss.
5 Use caution before you drill or cut. Be careful not to cut or drill into gas tanks, fuel
lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any
vehicle.
6 Never run speaker wires underneath your vehicle. Running speaker wires inside the
vehicle provides the best protection from exhaust heat and environmental elements.
7 Avoid running wires over, near, or through sharp edged surfaces. Use rubber grommets
to protect any wires routed through metal, especially the firewall.
8 When running the speaker cable from the amplifier, avoid running it near sources of
high current (i.e. wiring harnesses, battery cables).
Mounting the car audio speakers
To mount the car audio speakers:
1 Determine where the speakers will be mounted. Make sure the area is large enough
for the speaker to mount evenly and deep enough for the speaker to fit.
2 Refer to the specification chart on the following page to determine the proper
diameter hole to cut for your speaker model.
3 If supplied, use the plastic mounting ring as a template to mark the locations for the
mounting screws.
4 Drill the holes with a 1/8" bit.
5 Be sure to observe proper polarity when connecting the wires. The speaker's positive
terminal is indicated with a "+".
Standard rear
deck installation
Standard door
installation
Mounting
ring Speaker Mounting
hole cut-out
Grille
Grille Mounting
ring Speaker Mounting
hole cut-out


Specyfikacje produktu

Marka: Dynex
Kategoria: Głośniki samochodowe
Model: DX-S1000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dynex DX-S1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą