Instrukcja obsługi Draytek VigorSwitch G2100

Draytek Niesklasyfikowane VigorSwitch G2100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Draytek VigorSwitch G2100 (11 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
VigorSwitch P2100/G2100
L2+ Managed Switch
Quick Start Guide
Version: 1.3
Firmware Version: V2.8.3
(For future update, please visit DrayTek web site)
Date: September 19, 2023
Copyrights
© All rights reserved. This publication contains information that is protected by copyright. No part
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language without written permission from the copyright holders.
Trademarks
The following trademarks are used in this document:
Microsoft is a registered trademark of Microsoft Corp.
Windows, Windows 8, 10, 11 and Explorer are trademarks of Microsoft Corp.
Apple and Mac OS are registered trademarks of Apple Inc.
Other products may be trademarks or registered trademarks of their respective
manufacturers.
Safety Instructions
Read the installation guide thoroughly before you set up the switch.
The switch is a complicated electronic unit that may be repaired only be authorized and
qualified personnel. Do not try to open or repair the switch yourself.
Do not place the switch in a damp or humid place, e.g. a bathroom.
Do not stack the switches.
The switch should be used in a sheltered area, within a temperature range of 0 to +45
Celsius.
Do not expose the switch to direct sunlight or other heat sources. The housing and
electronic components may be damaged by direct sunlight or heat sources.
Do not deploy the cable for LAN connection outdoor to prevent electronic shock hazards.
Do not power off the device when saving configurations or firmware upgrades. It may
damage the data in a flash. Please disconnect the Internet connection on the device before
powering it off when a TR-069/ ACS server manages the device.
Keep the package out of reach of children.
When you want to dispose of the switch, please follow local regulations on conservation of
the environment.
Warranty
We warrant to the original end user (purchaser) that the switch will be free from any defects in
workmanship or materials for a period of two (2) years from the date of purchase from the dealer.
Please keep your purchase receipt in a safe place as it serves as proof of date of purchase. During
the warranty period, and upon proof of purchase, should the product have indications of failure
due to faulty workmanship and/or materials, p2-we will, at our discretion, repair or replace the
defective products or components, without charge for either parts or labor, to whatever extent
we deem necessary tore-store the product to proper operating condition. Any replacement will
consist of a new or re-manufactured functionally equivalent product of equal value, and will be
offered solely at our discretion. This warranty will not apply if the product is modified, misused,
tampered with, damaged by an act of God, or subjected to abnormal working conditions. The
warranty does not cover the bundled or licensed software of other vendors. Defects which do not
significantly affect the usability of the product will not be covered by the warranty. We reserve
the right to revise the manual and online documentation and to make changes from time to time
in the contents hereof without obligation to notify any person of such revision or changes.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired operation.
USA Local
Representative
Company name
ABP International Inc.
13988 Diplomat Drive Suite 180 Dallas TX 75234
ZIP Code
75234
E
-
mail
itadmin@abptech.com
Contact Person
Mr. Henry N Castillo
Tel.
(972)831
-
1600 140
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
EU Declaration of Conformity
We DrayTek Corp. , office at No.26, Fushing Rd, Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan, declare under our sole
responsibility that the product
Product name: PoE 8+2 Gigabit Switch
Model number: VigorSwitch P2100
Manufacturer: DrayTek Corp.
Address: No.26, Fushing Rd, Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan.
is in conformity with the relevant Union harmonisation legislation:
EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU with reference to the following standards
Standard
Version / Issue date
EN 55032
2012+AC:2013 class A
EN 61000
-
3
-
2
2014 Class A
EN 61000
-
3
-
3
2013
EN 55035
2017
EN 62368
-
1
2014 +A11:2017 (Second Edition)
EN IEC 63000:2018
2018
Hsinchu
October, 2019
Calvin Ma / President .
(place)
(date)
(Legal Signature)
Declaration of Conformity
We DrayTek Corp. , office at No.26, Fushing Rd, Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan, declare under our sole
responsibility that the product
Product name: PoE 8+2 Gigabit Switch
Model number: VigorSwitch P2100
Manufacturer: DrayTek Corp.
Address: No.26, Fushing Rd, Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan.
Importer: UK - CMS Distribution Limited, 15 Worship Street, London, EC2A 2DT
Ireland - CMS Distribution Limited, Bohola Road, Kiltimagh, Co Mayo, Ireland
is in conformity with the relevant UK Statutory Instruments:
The Electromagnetic Compatibility Regulations 2016 (SI 2016 No.1091), The Electrical Equipment (Safety) Regulations 2016 (SI
2016 No.1101), and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2012 (SI 2012 No. 3032) with reference to the following standards:
Standard
Version / Issue date
EN 55032
2015+A1:2016 class A
EN 61000
-
3
-
2
2014
EN 61000
-
3
-
3
2013+A1:2019
EN 55035
2017
EN 62368
-
1
2014+A11:2017
EN IEC 63000:2018
2018
Hsinchu
24
t
h
June
, 20
21
Calvin Ma / President .
(place)
(date)
(Legal Signature)


Specyfikacje produktu

Marka: Draytek
Kategoria: Niesklasyfikowane
Model: VigorSwitch G2100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Draytek VigorSwitch G2100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Draytek

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024