Instrukcja obsługi Draper GTP34

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Draper GTP34 (24 stron) w kategorii Grastrimmer. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
80880
PETROL
BRUSH CUTTER
1. TITLE PAGE
1.1 INTRODUCTION:
USER MANUAL FOR: Petrol Brush Cutter
Stock No: 80880
Part No: GTP34
As our user manuals are continually updated, users should make sure that they use
the very latest version.
Downloads are available from: http://drapertools.com/manuals
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Product Helpline: +44 (0) 23 8049 4344
General Fax: +44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING! – Information that draws attention to the risk of injury or death.
CAUTION! – Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational use
only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any
other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
1.2 REVISIONS:
Date first published September 2017.
2. CONTENTS
1. TITLE PAGE
1.1 INTRODUCTION.......................................................................................................... 2
1.2 REVISION HISTORY .................................................................................................. 2
1.3 UNDERSTANDING THIS MANUAL ............................................................................. 2
1.4 COPYRIGHT NOTICE ................................................................................................. 2
2. CONTENTS
2.1 CONTENTS ....................................................................................................................3
3. GUARANTEE
3.1 GUARANTEE...............................................................................................................4
4. INTRODUCTION
4.1 SCOPE.........................................................................................................................5
4.2 SPECIFICATION .......................................................................................................... 5
4.3 HANDLING AND STORAGE........................................................................................ 5
4. INTRODUCTION
4.1 SCOPE......................................................................................................................... 5
4.2 SPECIFICATION .......................................................................................................... 5
4.3 HANDLING AND STORAGE........................................................................................ 5
5. HEALTH AND SAFETY INFORMATION
– 1) Personal protective equipment (ppe)................................................................ 6
– 2) Training ................................................................................................................ 6
– 3) Preparation .......................................................................................................... 6
– 4) Operation ..........................................................................................................6-7
– 5) Maintenance ........................................................................................................7
– 6) Storage................................................................................................................. 7
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION ........................................................................................................8
7. UNPACKING AND CHECKING
7.1 PACKAGING ................................................................................................................ 9
7.2 WHAT´S IN THE BOX? ................................................................................................ 9
8. ASSEMBLING THE BRUSH CUTTER
8.1 SPLIT SHAFT.............................................................................................................10
8.2 SHOULDER STRAP .................................................................................................. 10
8.3 CHANGING THE CUTTING MEANS ......................................................................... 11
8.4 FUEL ..........................................................................................................................12
9. BRUSH CUTTER INSTRUCTIONS
9.1 COLD STARTING THE ENGINE................................................................................ 13
9.3 STOPPING THE ENGINE .......................................................................................... 14
9.4 BRUSH CUTTING...................................................................................................... 14
9.5 BLADE THRUST........................................................................................................ 14
9.6 GRASS TRIMMING....................................................................................................15
10. MAINTENANCE & TROUBLESHOOTING
10.1 CARBURETTOR ADJUSTMENT............................................................................... 16
10.2 AIR FILTER ................................................................................................................16
10.3 SPARK PLUG............................................................................................................. 16
10.4 CLEANING, TRANSPORT & STORAGE ................................................................... 17
11. OPTIONAL ACCESSORIES
11.1 OPTIONAL ACCESSORIES........................................................................................ 18
12. EXPLANATION OF SYMBOLS
12.1 EXPLANATION OF SYMBOLS................................................................................... 19
13. DISPOSAL
13.1 DISPOSAL ..................................................................................................................20
DECLARATION OF CONFORMITY .............................................................................. ENCLOSED
- 3 -

Specyfikacje produktu

Marka: Draper
Kategoria: Grastrimmer
Model: GTP34

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Draper GTP34, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Grastrimmer Draper

Draper

Draper GTP34 Instrukcja

3 Października 2024
Draper

Draper GT2318 Instrukcja

3 Października 2024

Instrukcje Grastrimmer

Najnowsze instrukcje dla Grastrimmer

HSM

HSM G4640 Instrukcja

3 Października 2024
IKRA

IKRA IAT 20-1M Instrukcja

1 Października 2024
Qualcast

Qualcast HQ-CG 3.6 Instrukcja

29 Września 2024
Ozito

Ozito PXCGSS-018U Instrukcja

29 Września 2024
Levita

Levita GT 550 Instrukcja

27 Września 2024
Einhell

Einhell MTK 24 Instrukcja

26 Września 2024
Truper

Truper DES-330 Instrukcja

26 Września 2024
Truper

Truper DES-520 Instrukcja

26 Września 2024