Instrukcja obsługi Draper CSP2625


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Draper CSP2625 (36 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/36
INSTRUCTIONS FOR
25.4cc 250mm
Petrol Chainsaw
Stock No.15042 Part No.CSP2625
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
ATTENTION!:
2 stroke engines MUST be filled with
unleaded fuel, MIXED wit
h 2-stroke oil.
Failure to add oil or in co
rrectly mixing the oil
WILL re sult in running problems o r
ENGINE
FAILURE!
THIS
CHAINSAW
MUST ONLY BE
USED BY TRAINED
TREE SURGEONS OR
OTHER SUITABLY
QUALIFIED AND
COMPETENT
PERSONS
1 TITLE PAGE
1.1 INTRODUCTION
USER MANUAL FOR:
25.4cc 250mm PETROL CHAINSAW
Stock No. 15042
Part No. CSP2625
1.2 REVISIONS
As our user manuals are continually updated, users should make sure that they use the very
latest version.
Downloads are available from: http://www.drapertools.com/manuals
DRAPER TOOLS LIMITED WEBSITE: www.drapertools.com
HURSLEY ROAD PRODUCT HELPLINE: +44 (0) 23 8049 4344
CHANDLER’S FORD GENERAL FAX: +44 (0) 23 8026 0784
EASTLEIGH
HAMPSHIRE
SO53 1YF
UK
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT
WARNING! Information that draws attention to the risk of injury or death.
CAUTION! Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal & educational use only.
Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any other
form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
Date first published May 2016.
3
2 CONTENTS
2.1 CONTENTS
PAGE CONTENT PAGE
1 TITLE PAGE
1.1 INTRODUCTION ..................................................................................................................2
1.2 REVISION HISTORY..............................................................................................................2
1.3 UNDERSTANDING THIS MANUAL ......................................................................................2
1.4 COPYRIGHT NOTICE ............................................................................................................2
2 CONTENTS
2.1 CONTENTS ...........................................................................................................................3
3 GUARANTEE
3.1 GUARANTEE ........................................................................................................................4
4 INTRODUCTION
4.1 SCOPE ..................................................................................................................................5
4.2 SPECIFICATION ....................................................................................................................5
4.3 HANDLING & STORAGE ......................................................................................................6
5 HEALTH & SAFETY INFORMATION
5.1 SAFETY INSTRUCTIONS FOR CHAINSAW USE ....................................................................7
5.2 HEALTH AND SAFETY INFORMATION CONCERNING THE USE OF FUELS ...................... 11
6 TECHNICAL DESCRIPTION
6.1 IDENTIFICATION ................................................................................................................12
7 UNPACKING & CHECKING
7.1 PACKAGING.......................................................................................................................14
7.2 WHAT’S IN THE BOX .........................................................................................................14
8 ASSEMBLY
8.1 ATTACHING/ADJUSTING GUIDE BAR AND CHAIN ..........................................................15
8.2 FUEL AND LUBRICATION ..................................................................................................18
9 OPERATION & USE
9.1 COLD STARTING THE ENGINE...........................................................................................19
9.2 WARM STARTING THE ENGINE ........................................................................................20
9.3 STOPPING THE ENGINE .....................................................................................................20
9.4 PERSONAL PROTECTIVE EQUIPMENT (PPE) .....................................................................20
9.5 HOLDING THE CHAINSAW................................................................................................21
9.6 KICKBACK ..........................................................................................................................22
9.7 CHAIN BRAKE ....................................................................................................................23
9.8 CUTTING ............................................................................................................................23
9.9 FELLING..............................................................................................................................23
9.10 DELIMBING ........................................................................................................................24
9.11 CROSS CUTTING/BUCKING ................................................................................................25
9.12 SAW CHAIN .......................................................................................................................25
9.13 CHAIN LUBRICATION ........................................................................................................26
9.14 SHARPENING .....................................................................................................................26
10 MAINTENANCE
10.1 CARBURETTOR ADJUSTMENT ..........................................................................................27
10.2 BAR MAINTENANCE..........................................................................................................27
10.3 AIR FILTER..........................................................................................................................28
10.4 FUEL FILTER .......................................................................................................................28
10.5 OIL FILTER ..........................................................................................................................28
10.6 SPARK PLUG ......................................................................................................................29
10.7 CLEANING, TRANSPORT AND STORAGE ..........................................................................29
11 TROUBLESHOOTING
11.1 TROUBLESHOOTING GUIDE .............................................................................................30
12 EXPLANATION OF SYMBOLS
12.1 EXPLANATION OF SYMBOLS ...........................................................................................33
13 DISPOSAL
13.1 DISPOSAL .......................................................................................................................... 34
DECLARATION OF CONFORMITY ....................................................................................................... ENCLOSED


Specyfikacje produktu

Marka: Draper
Kategoria: Maszyna do piłowania
Model: CSP2625

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Draper CSP2625, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Maszyna do piłowania Draper

Draper

Draper CSP2625 Instrukcja

4 Października 2024
Draper

Draper D20 Instrukcja

3 Października 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita

Makita 5603 Instrukcja

15 Października 2024
MSW

MSW -TAS287 Instrukcja

15 Października 2024
MSW

MSW T-SAW300 Instrukcja

15 Października 2024
Black & Decker

Black & Decker KS650 Instrukcja

14 Października 2024
Black & Decker

Black & Decker GKC3630L20 Instrukcja

14 Października 2024
Ferm

Ferm FKS-165 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650 Instrukcja

14 Października 2024
Husqvarna

Husqvarna 365H Instrukcja

13 Października 2024
Makita

Makita DJV181Z Instrukcja

12 Października 2024