Instrukcja obsługi DoorBird A1093

DoorBird Nie skategoryzowane A1093

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DoorBird A1093 (48 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/48
1
Page 1-10
Installation Manual
Gigabit High-PoE-Injector
A1093
Page 20-27
Manuel d’installation
Gigabit High-PoE-Injector
A1093
Seite 11-19
Installationsanleitung
Gigabit High-PoE-Injector
A1093
VERSION ., MIN. HW .
A1093
Páginas 28-35
Manual de instalación
Gigabit High-PoE-Injector
A1093
Pagina 36-44
Istruzioni per
l’installazione
Gigabit High-PoE-Injector
A1093
VERSION . MIN. HW .
2
INSTALLATION MANUAL
Read these instructions carefully before starting to use
any components. Keep the manual so you can refer
to it at a later date if required. If you hand over the
device to other persons for use, please hand over the
operating manual as well.
You can always find the most up-to-date version of the
installation manual on www.doorbird.com/support
To make things easier we use the term “device” for
the product “Gigabit High-PoE-Injector A1093” and
“mobile device” for a smartphone or tablet.
Liability
Every care has been taken in the preparation of this
document. Please inform Bird Home Automation
GmbH of any inaccuracies or omissions. Bird Home
Automation GmbH cannot be held responsible for any
technical or typographical errors and reserves the right
to make changes to the product and manuals without
prior notice. Bird Home Automation GmbH makes
no warranty of any kind with regard to the content
of this document, including, but not limited to, the
implied warranties of merchantability and fitness for
a particular purpose. Bird Home Automation GmbH
shall neither be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Equipment Modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no components that require service by the user.
Unauthorized equipment changes or modifications
will invalidate all applicable regulatory certifications
and approvals.
Symbols used
Danger: Indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
Warning: Indicates a hazardous situation
which, if not avoided, could result in death or
serious injury.
Caution: Indicates a hazardous situation
which, if not avoided, could result in minor or
moderate injury.
NOTICE Notice: Indicates a situation which, if not
avoided, could result in damage to property.
Important: Indicates significant information
which is essential for the product to function
correctly.
Note: Indicates useful information which
helps in getting the most out of the product.
Hazard information
• Mounting, installation and servicing work on
electrical devices may only be performed by
a qualified electrician. Failure to observe this
regulation could result in the risk of serious
damage to health or fatal injury due to electric
shocks.
• Devices with 110-240 V connection: The device
may only be connected to an easily accessible
power socket outlet. The mains adapter must
be pulled out if a hazard occurs.
• For power supply, only use the original plug-
in mains adapter delivered with the device,
separately available DIN rail power supplies
or a recommended PoE-Switch/PoE-Injector
as specified in this manual.
• Because of electrostatic charging, direct
contact with the circuit board can result in
destruction of the device. Direct contact with
the circuit board must therefore be avoided
at any time.
• Observe the EN 60065 resp. EN 60950 resp.
EN 62368 standard.
• Do not use the device if there are signs of
damage to the housing, control elements
or connecting sockets, for example, or if it
demonstrates a malfunction. If you have any
doubts, please have the device checked by
an authorized expert.
• Do not open the device. This voids the
warranty of the device. The device does not
contain any parts that can be maintained by
the user. In the event of an error, please have
the device checked by an authorized expert.
• For safety, approval and licensing reasons
(CE/FCC/IC etc.), unauthorized change and/or
modification of the device is not permitted.
• The device is not a toy: do not allow babies
and children to play with it.
• To avoid the danger of suffocation, keep
any packing materials away from babies
and children. Plastic films/bags, pieces of
polystyrene, etc. are not a toy and can be
dangerous in the hands of a child. Discard any
packing materials immediately after removing
the product. Do not reuse packing materials.
• Always lay cables in such a way that they do
not become a risk to people and domestic
animals.
• Voltage is applied to parts within the
equipment. Do not touch any parts that are
not associated with the installation, wiring, or
connection. Electric shock could result.
• On devices which are not marked as weather-
proof: Keep the device away from water or
any other liquid.
• Do not install or make any wire terminations
while power supply is plugged in. It can cause
electric shock or damage to the device.
WARNING
ENGLISH
3
• Before turning on power, make sure wires are
not crossed or shorted. If not, fire or electric
shock could result.
• High voltage may be present internally. Do not
open the device. Electric shock could result.
• The device is not of explosion-proof. Do
not install or use near gases or flammable
materials. Fire or explosion could result.
• Do not install two power supplies in parallel
to a single input. Fire or damage to the device
could result. Be sure to connect a single power
supply to the device.
• Do not connect any terminal on the device to
an AC power line. Fire or electric shock could
result.
• Keep AC cord from being marred or crushed.
If the AC cord is fractured, fire or electric shock
could result.
• Do not plug or unplug with wet hands. Electric
shock could result.
• Do not put any metal or flammable material
into the device. Fire, electric shock, or device
trouble could result.
• Existing wiring may contain high voltage AC
electricity. Damage to the device or electric
shock could result. Wiring and installation
must be done by a qualified electrician.
• When mounting the device on a wall or
ceiling, install the device in a convenient
location, but not where it could be jarred or
bumped. Injury could result.
• On devices with ground terminals, connect to
an earth ground. Otherwise fire or malfunction
could result.
• On devices with plastic or real glass, do not put
high pressure on the glass. If fractured, injury
could result.
• On devices with LCD, if LCD is punctured, do
not allow contact with the liquid crystal inside.
Injury could result. If necessary, gargle your
mouth and clean your eyes or skin with clear
water for at least 15 minutes and consult your
doctor.
• Do not put anything on the device or cover
the device with cloth, silicone, glue, coating,
separate covering etc. Fire or device issues
could result.
• Do not install the device in any of the following
locations. Fire, electric shock, or device trouble
could result.
Places under direct sunlight or places near
heating equipment that varies in temperature.
Places subject to dust, oil, chemicals, hydrogen
sulfide (hot spring).
Places subject to moisture and humidity
extremes, such as bathrooms, cellars,
greenhouses, etc.
Places where the temperature is very low, such
WARNING
as inside a refrigerated area or in front of an air
conditioner.
Places subject to steam or smoke (e.g. near
heating or cooking surfaces).
Where noise generating devices such as
dimmer switches or inverter electrical
appliances are close by.
Locations subject to frequent vibration or
impact.
• On devices with intercom, be sure to perform
a call test with low audio volume on both
intercom devices. A sudden call etc. may arrive
causing for example damage to your ear.
• If the device does not operate properly, unplug
the power supply.
• All devices which are not marked as weather-
proof are designed for indoor use only. Do not
use outdoor.
• On devices which are marked weather-proof:
Do not spray with high-pressure water. Device
issues could result.
• We do not assume any liability for damage to
property or personal injury caused by improper
use or the failure to observe the hazard
information. In such cases, any claim under
warranty ceases. For consequential damages,
we assume no liability!
• For devices that are supplied with a power
supply unit: In accordance with Article 33 of
the REACH Regulation (Regulation (EC) No.
1907/2006), we inform you that the metal
contact of the plug pin of the mains adapter
contains a concentration of >0.1% of the
substance EC / List no.: 231-100-4 (lead) listed in
the REACH Regulation. When used as intended,
no measures are required to be able to use the
product safely due to the lead concentration.
Safety instructions
• The device shall be used in compliance with
local laws and regulations.
• Store the device in a dry and ventilated
environment.
• Avoid exposing the device to shocks or heavy
pressure.
• Do not install the device on unstable brackets,
surfaces or walls. Make sure the material is
strong enough to support the weight of the
device.
• Use only applicable tools when installing the
device. Using excessive force with tools could
cause damage to the device.
• Do not use chemicals, caustic agents, or aerosol
cleaners.
• Use a clean dry cloth for cleaning.
• Use only accessories that comply with technical
N OT I CE

Specyfikacje produktu

Marka: DoorBird
Kategoria: Nie skategoryzowane
Model: A1093

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DoorBird A1093, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Nie skategoryzowane DoorBird

DoorBird

DoorBird D2100EA Instrukcja

12 Marca 2025
DoorBird

DoorBird MTM18A Instrukcja

12 Marca 2025
DoorBird

DoorBird D2109V Instrukcja

12 Marca 2025
DoorBird

DoorBird A1093 Instrukcja

10 Lutego 2025

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane

AirLive

AirLive POE-GSH402-BT Instrukcja

25 Marca 2025
ETON

ETON UG VW T5 F3.2 Instrukcja

25 Marca 2025
Ikan

Ikan PT4500S-TMW Instrukcja

25 Marca 2025
WEG

WEG MPW18-3-D004 Instrukcja

25 Marca 2025
Vello

Vello HGS-2 Instrukcja

24 Marca 2025
Genexis

Genexis FiberBox XGS2120 Instrukcja

24 Marca 2025
Autel

Autel MaxiSys Ultra S2 Instrukcja

24 Marca 2025
Thermador

Thermador VTN2DA Instrukcja

24 Marca 2025
Kanto

Kanto CM-EXT60 Instrukcja

24 Marca 2025
Silver Cross

Silver Cross Geneva Wardrobe Instrukcja

24 Marca 2025