Instrukcja obsługi Dometic CoolCat

Dometic Airco CoolCat

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dometic CoolCat (10 stron) w kategorii Airco. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/10
Read these instructions carefully. These
instructions MUST stay with this product.
USA
SERVICE OFFICE
Dometic Corporation
1120 North Main Street
Elkhart, IN 46514
CANADA
Dometic Corporation
46 Zatonski, Unit 3
Brantford, ON N3T 5L8
CANADA
SERVICE CENTER &
DEALER LOCATIONS
Please Visit:
www.eDometic.com
REVISION C
Form No. 3314102.000 08/16
(French 3314103.000_C)
©2016 Dometic Corporation
LaGrange, IN 46761
RECORD THIS INFORMATION FOR FUTURE
REFERENCE:
Model Number
Serial Number
Date Purchased
Self-Contained Unit
Description Model
Heat Pump 441003.701
441003A701
This Unit is designed for OEM installation. All initial installations must be approved by Dometic Corporation.
INSTALLATION
INSTRUCTIONS
2
TABLE OF CONTENTS
INTRODUCTION 2 ....................................................................................................................................................................
DOCUMENT SYMBOLS 2 ........................................................................................................................................................
IMPORTANT SAFETY INSTRUCTIONS 3 ................................................................................................................................
A. Recognize Safety Information 3 ...................................................................................................................................
B. Understand Signal Words 3 ..........................................................................................................................................
C. Supplemental Directives 3 ............................................................................................................................................
D. General Safety Messages 3 .........................................................................................................................................
GENERAL INFORMATION 4 .....................................................................................................................................................
A. Required Tools ...........................................................................................................................................................4
B. Heat Gain 4 ..................................................................................................................................................................
C. Unit Functions 4 ............................................................................................................................................................
D. Condensation ............................................................................................................................................................4
E. Drain Tube .................................................................................................................................................................4
F. Heat Pump Operation 4 ................................................................................................................................................
SPECIFICATIONS 5 ..................................................................................................................................................................
A. Table - Unit Data 5 ........................................................................................................................................................
B. Interior Compartment/Sidewall Opening Requirements 5 ............................................................................................
INSTALLATION INSTRUCTIONS 6 ..........................................................................................................................................
A. Choosing Proper Location For Unit 6 ...........................................................................................................................
B. Grilles And Registers .................................................................................................................................................6
C. Opening Preparation 6 .................................................................................................................................................
D. Wiring Requirements 7 .................................................................................................................................................
E. Choosing Thermostat Location ..................................................................................................................................7
F. Installing Unit 7 .............................................................................................................................................................
G. Wiring System 8 ...........................................................................................................................................................
H. Thermostat And Communication Cable Installation 8 ...................................................................................................
I. System Checkout 9 ......................................................................................................................................................
WIRING DIAGRAM 9 ................................................................................................................................................................
A. Unit Wiring Diagram - Earlier Version 9 ........................................................................................................................
B. Unit Wiring Diagram - Later Version 10 ........................................................................................................................
INSTALLATION COMPONENTS 10 ..........................................................................................................................................
INTRODUCTION
This heat pump (hereinafter referred to as “unit” or “product”) is designed and intended for installation in a small Recreational
Vehicle (hereinafter referred to as RV) during the time it is manufactured. It is recommended that the RV interior space be
essentially one undivided space.
Use these instructions to ensure a properly installed, and properly functioning product.
Dometic Corporation reserves the right to modify appearances and specications without notice.
DOCUMENT SYMBOLS
Indicates additional information that is NOT related
to physical injury. Indicates step-by-step instructions.
3
C. Supplemental Directives
Read and follow all safety information and
instructions to avoid possible injury or death.
Read and understand these instructions be-
fore [installing / using / servicing / performing
maintenance on] this product.
Incorrect [installation / operation / servicing /
maintaining] of this product can lead to seri-
ous injury. Follow all instructions.
The installation comply with all ap MUST -
plicable local and national codes, including
the latest edition of the following standards:
U.S.A.
ANSI/NFPA70, National Electrical Code
(NEC)
ANSI/NFPA 1192, Recreational Vehicles
Code
CANADA
CSA C22.1, Parts l & ll, Canadian Electri-
cal Code
CSA Z240 RV Series, Recreational
Vehicles
D. General Safety Messages
Failure to obey the following warn-
ings could result in death or serious injury:
This product be [installed / serviced] by a MUST
qualied service technician.
Do NOT modify this product in any way. Modica-
tion can be extremely hazardous.
Do NOT add any devices or accessories to this
product except those specically authorized in
writing by Dometic Corporation.
This manual has safety information and instructions to help
you eliminate or reduce the risk of accidents and injuries.
A. Recognize Safety Information
This is the safety alert symbol. It is used to
alert you to potential physical injury hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.
B. Understand Signal Words
A signal word will identify safety messages and
property damage messages, and will indicate the
degree or level of hazard seriousness.
indicates a hazardous situation that,
if - NOT avoided, could result in death or serious in
jury.
indicates a hazardous situation that,
if NOT avoided, could result in minor or moderate
injury.
is used to address practices NOT
related to physical injury.
IMPORTANT SAFETY INSTRUCTIONS

Specyfikacje produktu

Marka: Dometic
Kategoria: Airco
Model: CoolCat

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dometic CoolCat, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Airco Dometic

Instrukcje Airco

Najnowsze instrukcje dla Airco

TCL

TCL MN12Z0 Instrukcja

30 Września 2024
TCL

TCL MN18Z0 Instrukcja

30 Września 2024
Stirling

Stirling A006C-12C Instrukcja

30 Września 2024
Haier

Haier AS25QCEHRA Instrukcja

30 Września 2024
Haier

Haier AS35QCEHRA Instrukcja

30 Września 2024
Haier

Haier AS71QEEHRA Instrukcja

30 Września 2024
Haier

Haier AS53TCCHRA Instrukcja

30 Września 2024
Haier

Haier AS71PDDHRA Instrukcja

30 Września 2024