Instrukcja obsługi Doepfer LMK4+

Doepfer Niesklasyfikowane LMK4+

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Doepfer LMK4+ (24 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
DOEPFER
MIDI Master Keyboard
LMK4+
LMK4+LMK4+
LMK4+
User's Guide
LMK4+ User's Guide Page 2
User's Guide LMK4+
INDEX
1. Operation (Hardware)
1.1 Power Supply
1.2 MIDI-Interface
1.3 Connection of External Controllers and Footswitches
1.4 Controls
1.5 Operating and Security Instructions
2. Operation (Software)
2.1 Switching the keyboard ON
2.2 Menu Structure
2.3 Description of Menus
2.3.1 Preset
2.3.2 Program Change / Bank Select
2.3.3 Real Time / Master Channel
2.3.4 Split
2.3.5 Controller Assign / Activate
2.3.6 User-defined Controllers
2.3.7 Parameters / Name
2.3.8 Panic
Appendix A: Velocity response and aftertouch curves tables
Appendix B: Pin assignment of power and foot controller jacks
Appendix C: Conversion table Bank/Numbers to Decimal System
Appendix D: Quick reference table of functions
Appendix E: Resetting all Presets
Appendix F: USB version of the LMK4+
LMK4+ User's Guide Page 3
1. OPERATION (Hardware)
1.1 Power Supply
The LMK4+ does not have a built-in power supply. Instead it uses a plug-in type external power supply (AC
adapter). One reason for this feature is electrical safety. Keeping danger voltages (main) out of the keyboard
increases the electrical safety. Therefore a external power supply of high quality and safety should be used. If the
keyboard is used in Germany the external power supply must be VDE approved.
Another reason for the external power supply is the fact that line voltages and plug types vary considerably from
country to country. Using a plug-in external supply the LMK4+ can be used any where with a locally purchased
power supply, thus keeping the retail price down.
The power supply must be able to deliver 7-12 VDC unstabilized voltage, as well as a minimum current of 400mA.
The LMK4+ is switched ON by plugging the AC adapter into a wall outlet and connecting it to the appropriate jack
on the back of the keyboard case. There is no separate ON/OFF switch.
If the polarity of the power supply is incorrect, the LMK4+ will not function. However, there is no danger of damage
to the circuitry since it is protected by a diode. A power supply for 230V AC and European type plug is included
with the LMK4+. Any other type of power supply and must be purchased locally by the user.
If you are using the power supply shipped with LMK4+ you may find the pinout of the LMK4+ power jack in the
appendix B.
Once the power supply has been plugged in a message should appear on the display (e.g. "LMK4 V1.00" for
indicating the software version 1.00) and the 8 LED's should flicker. If this does not happen the power supply is
either defective or does not have proper polarity/voltage/current. After that the LMK4+ should go into preset-mode
(see chapter 2.3.1 for details). The first LED should be illuminated.
1.2 MIDI-Interface
LMK4+ features 4 MIDI outputs with 2x2 parallel connected outputs. This means that the 2 MIDI outputs labelled
"MIDI OUT 1" transmit the same MIDI informations. Same is valid for the MIDI outputs labelled "MIDI OUT 2". In
the SPLIT menu (see chapter 2.3.4) the allocation of the split zones to the MIDI outputs is defined.
Connect MIDI outputs of the LMK4+ with MIDI-IN of the device(s) to be controlled by the LMK4+ (i.e. expander,
sequencer, synthesizer, sampler etc.). If several devices are to be controlled by the LMK4+ you may use the 4
MIDI outputs of the LMK4+. If you want to control more than 4 devices they have to be chain-linked via MIDI-
THRU/IN. Alternatively one may utilize a so-called MIDI-THRU-box.
The LMK4+ features a MIDI input. This input may be connected to another MIDI keyboard oder MIDI base pedal.
The incoming MIDI data can be managed by the LMK4+ as split zone. So it is possible to modify the MIDI channel
or the transposition of incoming MIDI data and to treat the external device as a split zone of the LMK4+. The MIDI
input can be used also for switching the LMK4+ presets via incoming Program Change events or for transfering
LMK4+ memory data via MIDI dump. For this purpose a suitable MIDI dump or editor software is required.
MIDI cables are not included with the LMK4+.
1.3 Connection of External Controllers & Footswitches
Located on the rear of the keyboard case are three jacks labelled "EXT. INPUTS" for
hooking up a double-footswitch ("SWITCHES") and two foot pedals ("CTRL1", "CTRL2"). Allocation of these
controllers to the various MIDI-functions is completely user-defined (see chapter 2.3.5). The name of the external
inputs for programming is EX.SW1 and and EX.SW2 for the foot switches and E.CTR.1 E.CTR.2 for the foot
controllers.
Do not connect the footswitches or foot controllers unless the LMK4+ is switched OFF (i.e. unplugged). While
power on the LMK4+ electronics checks the levels of the foot switches and assumes that these levels are the "off"
states. So do not operate the foot switches while turning power on. This feature allows the use of foot switches
with contacts open at rest as well as those closed at rest.
The foot switches and foot controllers are not included with the LMK4+ and have to be ordered separately if
required. A suitable foot switch is the DOEPFER VFP2, a suitable foot controller is the DOEPFER FP5. The
LMK4+ will work without the foot switches and foot controllers, although the corresponding functions will not be
available to the user in that case. If you are not using VFP2 or FP5 you may find the pinout of the ext. input jacks
in the appendix B as well as the type of potentiometer required for the foot controller.

Specyfikacje produktu

Marka: Doepfer
Kategoria: Niesklasyfikowane
Model: LMK4+

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Doepfer LMK4+, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Doepfer

Doepfer

Doepfer A-100 Instrukcja

4 Października 2024
Doepfer

Doepfer Dark Link Instrukcja

22 Września 2024
Doepfer

Doepfer A-196 Instrukcja

22 Września 2024
Doepfer

Doepfer A-134 Instrukcja

21 Września 2024
Doepfer

Doepfer A-135-2v Instrukcja

21 Września 2024
Doepfer

Doepfer A-145 Instrukcja

21 Września 2024
Doepfer

Doepfer A-101-2 Instrukcja

21 Września 2024
Doepfer

Doepfer A-99 Instrukcja

20 Września 2024
Doepfer

Doepfer A-103 Instrukcja

20 Września 2024
Doepfer

Doepfer A-165 Instrukcja

20 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024