Instrukcja obsługi DNP DS-ID400

DNP drukarka DS-ID400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DNP DS-ID400 (42 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/42
Operating Instructions
Before operating the unit, please read this manual thoroughly and
retain it for future reference.
Digital Photo Printer
DS-ID400
3-00D-053-11 (1)
© 2012 Dai Nippon Printing Co., Ltd.
2
Owner’s Record
The model and serial numbers are located at the rear.
Record these number in the space provided below.
Refer to these numbers whenever you call upon your
dealer regarding this product.
Model No. ____________________
Serial No. ____________________
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
This unit has no power switch.
When installing the unit, incorporate a readily accessible
disconnect device in the fixed wiring, or connect the power
plug to an easily accessible socket-outlet near the unit. If a
fault should occur during operation of the unit, operate the
disconnect device to switch the power supply off, or
disconnect the power plug.
For the customers in the U.S.A.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
All interface cables used to connect peripherals must be
shielded in order to comply with the limits for a digital
device pursuant to Subpart B of Part 15 of FCC Rules.
Warning on power connection
Use a proper power cord for your local power supply.
1. Use the approved Power Cord (2-core mains lead) /
Appliance Connector / Plug that conforms to the safety
regulations of each country if applicable.
2. Use the Power Cord (2-core mains lead) / Appliance
Connector / Plug conforming to the proper ratings
(Voltage, Ampere).
If you have questions on the use of the above Power Cord
/ Appliance Connector / Plug, please consult a qualified
service personnel.
For the customers in Europe
The manufacturer of this product is Dai Nippon Printing
Co., Ltd., 1-1-1, Ichigaya Kagacho, Shinjuku-ku, Tokyo,
Japan.
The Authorized Representative for EMC and product
safety is DNP PHOTO IMAGING EUROPE SAS, ZI
PARIS NORD II - BP 51077, 22 AVENUE DES
NATIONS, PARC SILIC - VILLEPINTE, 95948
ROISSY CDG CEDEX, FRANCE.
This apparatus shall not be used in the residential area.
For the customers in Europe, Australia, and
New Zealand
WARNING
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the
user may be required to take adequate measures.
For kundene i Norge
Dette utstyret kan kobles til et IT-strømfordelingssystem.
For the customers in Europe
If you want to dispose this product, do not mix
with general household waste. There is a
separate collection system for used electronics
products in accordance with legislation under
the WEEE Directive (Directive 2002/96/EC)
and is effective only within European Union.
WARNING
Table of Contents 3
Table of Contents
Chapter 1 Overview
What This Product Can Do .............................................................6
Information Updates........................................................................7
Supported Storage Media and File Formats .................................7
Chapter 2 Preparation
Supplied Accessories .....................................................................9
Names and Functions of Parts .....................................................10
Front .................................................................................................... 10
Rear ..................................................................................................... 11
Installation......................................................................................12
Connecting the Power Cord ................................................................ 12
Loading Print Packs ......................................................................12
Handling Print Packs ........................................................................... 12
Loading Print Packs............................................................................. 13
Replacing Print Packs ...................................................................14
Removing the Print Cartridge.............................................................. 14
Loading Print Packs............................................................................. 14
Repairing Breaks in the Ink Ribbon .................................................... 15
Clearing Paper Jams ............................................................................ 15
Inserting Storage Media (SD Cards / USB Memory Devices) ....15
Startup and Shutdown ..................................................................16
Startup ................................................................................................. 16
Shutdown............................................................................................. 16
Chapter 3 Settings
Displaying the Menus....................................................................17
Main Menus......................................................................................... 17
Selecting the Language ................................................................18
Configuring Settings for ID Photo Prints ....................................18
Selecting the Layout............................................................................ 18
Specifying which Layouts to Display ................................................. 18
Selecting Color or Monochrome for Prints ......................................... 19
Configuring Trim Settings................................................................... 19
Adjusting the Exposure Automatically ............................................... 20
Printing the File Information............................................................... 20

Specyfikacje produktu

Marka: DNP
Kategoria: drukarka
Model: DS-ID400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DNP DS-ID400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje drukarka DNP

DNP

DNP DP-QW410 Instrukcja

15 Września 2024
DNP

DNP DS-RX1 Instrukcja

6 Września 2024
DNP

DNP SL620 II Instrukcja

5 Września 2024
DNP

DNP DS620 Instrukcja

26 Sierpnia 2024
DNP

DNP DS-ID400 Instrukcja

6 Sierpnia 2024
DNP

DNP DS80 Instrukcja

4 Lipca 2024
DNP

DNP DP-DS820 Instrukcja

16 Maja 2024

Instrukcje drukarka

Najnowsze instrukcje dla drukarka

Kyocera

Kyocera ECOSYS P2135dn Instrukcja

15 Października 2024
Epson

Epson WorkForce Pro WF-C529R Instrukcja

15 Października 2024
OKI

OKI C920WT Instrukcja

15 Października 2024
Brother

Brother DCP-J152W Instrukcja

15 Października 2024
Fujifilm

Fujifilm Instax mini Link 3 Instrukcja

15 Października 2024
Sharp

Sharp MX-M7570 Instrukcja

14 Października 2024
Ricoh

Ricoh P C300W Instrukcja

14 Października 2024
OKI

OKI MC851dn Instrukcja

13 Października 2024
Kyocera

Kyocera TASKalfa 8052ci Instrukcja

13 Października 2024
Epson

Epson Mobilink TM-P20II Instrukcja

13 Października 2024