Instrukcja obsługi Digitus DN-10110


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Digitus DN-10110 (7 stron) w kategorii karta/adapter sieciowy. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/7
10/100/1000 MBPS
NETWORK PCI ADAPTER
User Manual
DN-10110
2
Table of Contents
CHAPTER 1 INTRODUCTION ........................................................................ 3
1.1 FEATURES ....................................................................................................... 3
1.2 ENVIRONMENTAL ........................................................................................... 3
1.3 PACKAGE ........................................................................................................ 4
CHAPTER 2 INSTALLATION ......................................................................... 4
2.1 INSTALLING THE GIGABIT LAN CARD .......................................................... 4
2.2 SOFTWARE INSTALLATION ........................................................................... 4
3
Chapter 1 Introduction
Congratulations on your purchase of this 10/100/1000Mbps Gigabit LAN Card DN-10110. The
Value leader among Gigabit adapters for PCI Bus personal computers. Instructions for installing
and configuring this product can be found in this manual. Before you install and use this product,
please read this manual carefully for full exploiting the functions of this product.
The DN-10110 provides the bandwidth capability to support high-end servers and workstations.
With Auto-negotiation, this card can run on three different speeds: 10Mbps at half and full duplex,
100Mbps at half and full duplex, and 1000Mbps at full duplex. When running at 1000Mbps, it
provides a network throughput of 2Gbps in full-duplex mode.
1.1 Features
Designed for versatility and performance, the DN-10110 LAN Card provides the following:
Operability in 32-bit,33/66MHz slot servers and workstations
Compliance with IEEE802.3ab 1000BASE-T Gigabit Ethernet standards,
IEEE802.3u Fast Ethernet standards
Plug-and-Play installation
Support PCI Revision 2.1,2.2,2.3
Support half and full duplex at 10Mbps, half and full duplex at 100Mbps,
and full duplex operation at 1000Mbps
One build-in RJ45 connector
Auto-Negotiation to the highest available speed
Support up to 128Kbytes Boot ROM
Support IEEE802.1P Layer 2 Priority Encoding
Support Full Duplex flow control (IEEE 802.3x)
Support IEEE 802.1Q VLAN tagging
Support PCI Message Signaled Interrupt (MSI)
Build-in FIFO buffers reduce overhead of memory transfers
Support Microsoft NDIS5 Checksum Offload (IP, TCP, UDP) and large send offload
Support Jumbo Frame transfers
Two LED indicators: 10/100/1000M Link, 10/100/1000M Act
Driver support for:
Microsoft Windows Series.
Linux
Novell Netware Series
1.2 Environmental
Storage Temperature: -40oC ~70oC
Operating Temperature : 0oC ~40oC
Storage Humidity: 5% ~90% RH Non-condensing
Operating Humidity: 10% ~90% RH Non-condensing


Specyfikacje produktu

Marka: Digitus
Kategoria: karta/adapter sieciowy
Model: DN-10110

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Digitus DN-10110, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje karta/adapter sieciowy Digitus

Instrukcje karta/adapter sieciowy

Najnowsze instrukcje dla karta/adapter sieciowy