Instrukcja obsługi Digital Watchdog VMAX A1 Plus

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Digital Watchdog VMAX A1 Plus (72 stron) w kategorii magnetowid. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/72
The picture might differ according to the specification and model.
Contents of this user manual are protected under copyrights and computer program laws.
Before keepusing the system, please read this User Manual and it for future reference.
Rev: 06/ 22
USER
USER
USER
USERUSER MANU
MANU
MANU
MANU MANUAL
AL
AL
ALAL
WARNING
TO REDUCE FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.
The installation should be made by a qualified service
person and conform to all local codes.
Cautions
Read Before System Operation
Follow these details to prevent material damage or personal injury.
Signs of Caution and Warning
Warning: This sign indicates that the user could die or seriously get wounded if not used or installed properly.
Caution: This sign indicates that the user could be wounded or could expect property damage if not used or installed
properly.
Warning: Do not expose the product to fog, rain, or too much humidity the to decrease danger from electric shock or
fire.
General Warning
Warning
1. Use the power cord, which is supplied or recommended by the supplier, or it may cause a fire.
2. Do not disassemble or reassemble the product. It may cause malfunction or fire.
3. Enquire your vendor for repair. It may cause electric shock or fire if the repair is not done properly.
4. Do not touch the product with wet hands. It may cause malfunction or electric shock.
5. Product installation must be ensured a professional for product installation, orby it may cause malfunction, electric shock,
or fire.
6. Ground applies to video products equipped with a 3 wire grounding type plug having a third (grounding) pin- . This plug
only fits into a grounding- type power outlet. If grounding is not done, it may cause malfunction or electric shock.
7. Ground connection must not touch gas pipe, water pipe, or telephone line. If grounding is not done properly, it may cause
electric shock.
8. Prevent metallic foreign substances from going inside the product. It may cause malfunction or electric shock.
9. Do not spray insecticide or flammable spray while driving. It may cause a fire.
10. Place the system in an r-open place where air ventilation is guaranteed, or it may cause ove heating and seriously damage
the system to be fired.
11. Prevent water from instilling inside electrical parts. Clean with a dry towel or malfunction or electric shock could result.
Caution
1. Use the power cord, which is supplied or recommended by the supplier. The internal fan rotates at high speed and may
cause an accident.
2. Do not drop, give strong vibration or shock to the product. It may cause malfunction.
3. The air inhaler of the front panel and air outlet of the back panel must not be blocked during installation.
The internal temperature of the product would be greater than allowable and could cause malfunction or fire.
4. Do not touch the product or the power cord when there is thunder. It may cause electric shock.
5. Do not install the product near or on top of heating source. The internal temperature of the product would be greater the
than allowable and could cause malfunction or fire.
6. Do not install the product in an inclined or unstable location or where vibration could be committed. It may cause
malfunction.
Cautions about the Power
Warning
1. Must use the outlet of the grounding to connect the power cord, or it may cause a fire.
2. Do not connect on the middle of the power cord or use an extension cord. It may generate heat or cause a fire.
3. Do not touch the power cord with wet hands. It may cause electric shock.
4. Keep the power cord dry and protect it from humidity. It may generate heat or cause a fire. The power cord is not waterproof.
5. Hold the body of the plug while removing the power plug. Do not pull the power cord. Damage to the power cord may
generate heat or cause a fire.
6. Check the power plug regularly. Humidity and moderation in smoking may cause a fire.
7. Remove the the the power cord from outlet when product is not used for a long time. circuit or electric It may cause short-
shock.
Caution
1. Do not turn off the power by removal of the power plug. To turn off the power, click the power button from the front panel.
When the system stops abnormally, the power button might not work. Click the power button for 5 full seconds to turn the
power off.
2. Do not cut off the power artificially or give shock or vibration to the unit while the hard disk is act It may cause hard ivating.
disk failure or loss of data.
Remarks
Pictures and buttons are subject to be changed or modified up to different models.
Function or configuration is subject to be changed or modified without prior notice for improvement of the product.

Specyfikacje produktu

Marka: Digital Watchdog
Kategoria: magnetowid
Model: VMAX A1 Plus

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Digital Watchdog VMAX A1 Plus, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje magnetowid Digital Watchdog

Instrukcje magnetowid

Najnowsze instrukcje dla magnetowid

Hikvision

Hikvision DS-7104NI-Q1 Instrukcja

15 Października 2024
Hitachi

Hitachi VT-F494A Instrukcja

10 Października 2024
DataVideo

DataVideo HDR-2 Instrukcja

9 Października 2024
Reolink

Reolink NVS8 Instrukcja

7 Października 2024
Synology

Synology DVA1622 Instrukcja

7 Października 2024
Motorola

Motorola MTN162K0021 Instrukcja

7 Października 2024