Instrukcja obsługi DeWalt DCF815-XE T 1

DeWalt Klucz udarowy DCF815-XE T 1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DeWalt DCF815-XE T 1 (16 stron) w kategorii Klucz udarowy. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
DCF813-XE
3/8" (9.5 mm) 10.8 V CORDLESS IMPACT WRENCH
DCF815-XE
1/4" (6.35 mm) 10.8 V CORDLESS IMPACT DRIVER
INSTRUCTION MANUAL
1
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL,
CALL US AT: 1800 654 155 (Aust) or 0800 339258 (NZ).
SAFETY INSTRUCTIONS FOR POWER TOOLS
When using power tools, always observe the safety regulations applicable in your
country to reduce the risk of fire, electric shock and personal injury. Read the following
safety instructions before attempting to operate this product. Keep these instructions in
a safe place.
WARNING: To reduce the risk of injury, read the instruction manual.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious
injury.
The term “power tool” in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.


Specyfikacje produktu

Marka: DeWalt
Kategoria: Klucz udarowy
Model: DCF815-XE T 1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DeWalt DCF815-XE T 1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Klucz udarowy DeWalt

Instrukcje Klucz udarowy

Najnowsze instrukcje dla Klucz udarowy

Fein

Fein ASb 648-EC2 Instrukcja

25 Września 2024
Fein

Fein ASCD18W2C Instrukcja

24 Września 2024
Fein

Fein ASbe 648 Instrukcja

24 Września 2024
Fein

Fein ASb 636 Instrukcja

23 Września 2024
Fein

Fein ASCD18W2 Instrukcja

22 Września 2024
Fein

Fein ASbe 647-1 Instrukcja

21 Września 2024
Fein

Fein ASb 647-1-EC2 Instrukcja

20 Września 2024
Fein

Fein ASbe 642 Instrukcja

19 Września 2024
Fein

Fein ASb 658-1-EC2 Instrukcja

17 Września 2024
Stanley

Stanley FMC041 Instrukcja

9 Sierpnia 2024