Instrukcja obsługi Denver TRC-1480 MK2

Denver Stacja pogodowa TRC-1480 MK2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Denver TRC-1480 MK2 (5 stron) w kategorii Stacja pogodowa. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/5

ENG-1

English

INSTRUCTION MANUAL DENVER TRC-1480 MK2

Wireless Indoor and Outdoor Thermometer, Clock and Weather Station

QUICK START GUIDE

1. Slide the battery cover at the ar of your indoor unit open. re

2. Insert 2 x AAA batteries in the battery compartment; observe correct polarity (+/-) as printed

inside the battery compartment.

3. Replace the battery cover. After a few seconds the LCD shows default time, calendar and

current indoor temperature and starts to search for the outdoor temperature signal.

ENG-2

4. Insert 2 x AAA batteries in the outdoor sensor. The outdoor temperature will be displayed with

“CH1” shown on the lower line of the LCD. Your indoor unit is synchronized with the outdoor

sensor on Channel 1; the outdoor temperature is display . ed

Please note:

Your outdoor sensor has a transmission range of 30m with no obstructions. The actual transmission

range can vary, depending on the signal path. Obstructions (roof, walls, ﬂoors, ceilings, trees, etc.)

aﬀect the signal range.

SET CALENDAR, 12/24-HOUR FORMAT AND TIME

1. Press and hold SET / ALM SET for 2 seconds, the time digits change to “2008 YR” and start

ﬂashing. Press +/- to set the year.

2. Press SET / ALM SET again, the month digits start ﬂashing. Press +/- to set the month.

3. Press SET / ALM SET again, the date digits start ﬂashing. Press +/- to set the date.

4. - Press SET / ALM SET again, the time digits change to “24 Hr”, press +/ to select “12 Hr” time

format or “24 Hr” time format. When selecting “12 Hr”, the AM / PM icon will be displayed.

5. Press SET / ALM SET again, the time digits “0:00” show and the hour digits start flashing. Press

+/- to set the hours.

6. Press SET / ALM SET again, the minute digits start ﬂashing. Press - button to set the minutes. +/

7. Press SET / ALM SET to return to normal mode, or wait 30 seconds for the unit to return

automatically.

SET ALARM

1. Press SET / ALM SET, the time digits change to the alarm time digits “AM 7:00 AL”. Press and

hold SET / ALM SET for 2 seconds, the hour digits start ﬂashing. Press +/- to set your desired

alarm time hour.

2. Press SET / ALM SET again, the alarm minute digits start ﬂashing. Press +/- to set the alarm

minutes.

3. ﬂashing. Press +/- to set the Press SET / ALM SET again, time digits change to “05” and start

snooze duration between 1 and 20 minutes.

4. Press SET / ALM SET to return to normal mode, or wait 30 seconds for the unit to return

automatically.

TURN ALARM ON OR OFF

Press SET / ALM SET to display the alarm time. When the alarm time is displayed, press + to turn on

/ oﬀ the daily alarm. When the alarm function is turned on, the icon appears between the hour and

minute digits.

SNOOZE FUNCTION

When your alarm turns on, the clock sounds a beep to wake you up. The icon starts ﬂashing.

1. Press SNOOZE to stop the alarm temporarily, the icon keeps ﬂashing. The alarm will beep

again after 5 minutes.

2. Press + / CHANNEL (ALM On-Oﬀ) to stop the alarm, the alarm beep will stop and the icon

illuminates; the alarm will beep again at the same time the next day.

Alarm Duration: 2 minutes.

DISPLAY TEMPERATURE IN DEGREES C OR F

Press (°C/°F) to display the temperature in degrees Celsius or Fahrenheit. –

READ THE MAXIMUM/MINIMUM TEMPERATURE RECORDS

1. Press MAX/MIN at the rear to display the indoor/outdoor maximum or minimum temperatures.

2. When maximum indoor/outdoor temperatures are displayed, press and hold MAX to clear the

maximum values; the unit will start recording and displaying updated data again.

3. When minimum indoor/outdoor temperature and humidity are displayed, press and hold MIN to

clear the minimum values; the unit will start recording and displaying updated data again.

ENG-3

USE INSTRUCTIONS FOR THE WEATHER STATION

There are four types of weather display on your weather station:

SUNNY / SUNNY AND CLOUDY / CLOUDY / RAINY.

SUNNY

SUNNY AND CLOUDY

CLOUDY

RAINY

Please note: For better use of your weather station, place it in a location with air circulation, e.g.

close to an open window. Placing it in an air-conditioned environment will aﬀect its accuracy.

After your weather station is powered up, it will take around 24 hours to stabilize. The weather icons

on the display give reference to the next 6-12 hours weather conditions. It may not match with the

current weather condition outside.

SYNCHRONIZE CLOCK WITH MULTIPLE OUTDOOR SENSORS

Your indoor unit comes with one outdoor sensor. You can purchase a second or third outdoor sensor

to work with this unit simultaneously.

1. Press + / CHANNEL (ALM On-Oﬀ), the bottom line of the LCD shows “CH2” and “--“. Press and

hold + / CHANNEL / ALM On-Oﬀ for 2 seconds. Insert 2 x AAA batteries in the second outdoor

sensor Change the button setting from 1 to 2 for selecting channel 2. The temperature of the . “ ” “ ”

second outdoor sensor is displayed on the lower line on the LCD.

2. . Repeat this step to synchronize a third outdoor sensor on “CH3”

TROUBLESHOOTING

1. In case your indoor unit shows irrelevant information or digits, it may be aﬀected by electrostatic

discharge or interferences from other devices. Press RESET on the rear of the unit. Your unit

will be reset to the factory settings (time and calendar) and you need to set time and calendar

again.

2. In case the outdoor temperature shows “--“:

2.1) Press + / CHANNEL (ALM On-Oﬀ) to display the correct channel, “CH1” is your default

channel;

2.2) -OFF) for If the outdoor temperature shows “CH1”, press and hold + / CHANNEL (ALM ON

2 seconds. The outdoor temperature will be displayed in approx 1 minute;

2.3) If above procedures do not work, repeat 2.2), bring in the outdoor sensor and press

RESET on the outdoor sensor.

Please note: If you observe a “Low Battery” icon on the lower left side of the LCD (which means your

outdoor sensor has a low battery level), replace the batteries of the sensor.

Specyfikacje produktu

Marka:	Denver
Kategoria:	Stacja pogodowa
Model:	TRC-1480 MK2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Denver TRC-1480 MK2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Stacja pogodowa Denver

Denver TRC-1480 MK2 Instrukcja

8 Września 2024

Denver WS-72 Instrukcja

4 Września 2024

Denver TRC-1470 Instrukcja

31 Sierpnia 2024

Denver WS-650 Instrukcja

29 Sierpnia 2024

Denver TRC-1460 Instrukcja

28 Sierpnia 2024

Denver WS-520 Instrukcja

21 Sierpnia 2024

Denver TRC-1490 Instrukcja

20 Sierpnia 2024

Denver WS-530 Instrukcja

6 Sierpnia 2024

Denver TRC-1480 Instrukcja

4 Lipca 2024

Instrukcje Stacja pogodowa

Najnowsze instrukcje dla Stacja pogodowa

Ascot GT-WS-07s Instrukcja

15 Stycznia 2025

Ventus K0382 Instrukcja

14 Stycznia 2025

TFA 20.1082.17 Instrukcja

12 Stycznia 2025

Oregon Scientific BAR310HG Instrukcja

12 Stycznia 2025

Auriol AHFL 433 B2 Instrukcja

12 Stycznia 2025

Oregon Scientific BAR 898 Instrukcja

11 Stycznia 2025

Davis Weatherlink Touch Console Instrukcja

11 Stycznia 2025

Taylor 5156 Instrukcja

8 Stycznia 2025

La Crosse Technology M71633 Instrukcja

8 Stycznia 2025

La Crosse Technology V41CA Instrukcja

8 Stycznia 2025