Instrukcja obsługi Denver ACT-1013

Denver kamera wideo ACT-1013

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Denver ACT-1013 (2 stron) w kategorii kamera wideo. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

ACT-1013 Quick Start Guide

ENG-1

AAppppeeaarraannccee aanndd BBuuttttoonnss IInnttrroodduuccttiioonn

1. On/Oﬀ/MODE/Back 2. Lens

3. Display Screen 4 . Work Indicator /15

5. Charging Indicator 6.OK /Menu/Conﬁrm

7. Battery Cover 8. Battery Compartment Switch

9. Microphone Hole 10. USB Port

11. Card SlotTF 12. HDMI Port

13.T Button (Upper button for Zoom +) 14.W Button (lower button for Zoom-)

 This product is compact in size, and very easy for installation;

 The camera supports FHD (1920x1080 25FPS) recording;

 Support high-speed USB2.0;

 Support 32GB Min SD Card at most;

 This product supports video output with playback function; it also supports HD

picture.

IInniittiiaall UUssee______________

1. Charge External Lithium Battery

Connect the camera with PC for charging, and the charging indicator (blue) will be on. The

indicator will be off when the charging is completed. Generally, it takes 2-4 hours to fully

charge the camera.

2. Use Storage Card

2.1 According to the recessed reminder beside the storage card slot, push the TF Card

completely into the end.

2. 2 Gently press the rear part of the storage card, and it will automatically pop out. .

Please notice: UHS (ultra highspeed) cards doesn’t work, as they are

not 100% backward compatible

Note: There is no built-in memorizer for this camera. Please insert a storage card when

using the camera. (High-quality TF Card is recommended.)

3. Start up/Shut Down

3.1 Start up: Keep pressing MODE button for 3s, the display screen will be on, and the

camera enters Start-up status.

3.2. Shut down: Under idle mode, press MODE button and hold on 3s to shut the camera

down.

3.3. Automatic Shutdown of Screen: When the camera s idle time is due, the screen will be ’

automatically shut down for saving power, and the screen shutdown light will be on.

3.4. Shutdown due to Low Power: When its power is extremely low, LCD will display the

icon " ", and the User shall conduct charging for the camera immediately. When the “

icon is red and ﬂickering, the camera will automatically shut down.

4. Function Mode Switch

This Camera has 3 modes including video recording mode, photo mode and playback mode.

When it is on, press MODE to switch diﬀerent modes.

5. Indicator

Work Indicator (Red): When the camera is working (such as recording a video, taking a photo,

shutdown and automatic shutdown of screen etc.), the work indicator will ﬂicker.

Charging Indicator (Blue): During the charging process, this indicator will be on; when the

camera is fully charged, it will automatically go out.

6. Video Recording Mode

When it is powered on, DV will directly enter video recording mode; under the preview status,

press OK button and it will start to record a video; press OK button again, and it will stop video

recording. However, video recording will automatically stop when the storage card is full or the

power is extremely low.

1 Mode Icon to indicate Video Recording Mode.

2 It means Video resolution, and FHD 1080P(15FPS)

（）25FPS / HD 720P(30FPS) / VGA (30FPS) are optional.

3 Recording Time, meaning how much time left for this

Video recording.

4 It means that TF Card is inserted.

5 Battery Icon means current power status.

6 E/V (Exposure Value).

7 It means that White Balance is automatic.

8 Charging Indicator.

9 Work Indicator.

(With maximum 29 minutes video recording per sequence)

7.Photo Mode:

When it is on, press MODE Button to enter Photo Mode; under the preview status, press OK

button to take a photo:

1 Mode Icon to indicate current Photo Mode.

2 Picture size; click this icon to choose 1M/2M/3M/5M/8M/12M.3M/5M/8M/10M/12M.

3 Counter, meaning the quantity of photo which

can be taken.

4 It means that TF Card is inserted.

5 Battery Power Icon.

6 It means current sharpness.

7 E/V (Exposure Value).

8 It means that the picture quality is Fine.

9 It means that White Balance is automatic.

10 Charging Indicator.

11 Work Indicator .

System Requirements

Operating

System

PC Camera Mode (PCCAM)

Removable Disc

Mode (MSDC)

Microsoft System: Microsoft WindowsXP(SP3), Vista 7 8 , ,

iOS system: MAC OS X Version 10.8.0 or latest version

Microsoft System: Microsoft Windows2000, XP, , Vista 7 8 ,

iOS system: MAC OS X Version: 10.0.0 or latest version

CPU

Intel Pentium 1GBHz or CPU with equivalent performance

Internal Memory

More than 1GB

Sound card and Graphic card

Support or advanced versions. DirectX8

CD Driver

4x or quicker

Hard Disk

Remain more than 2GB memory space

Others

USB1.1 or USB2.0 port

USB Cable

Formateret: Venstre: 1 cm, Højre: 1 cm, Bund: 1 cm

Formateret: Skrifttype: 9 pkt

Formateret: Indrykning: Første linje: 0 ch

Formateret: Skriftfarve: Sort

Formateret: Skriftfarve: Rød

Formateret: Indrykning: Venstre: 0 cm, Hængende: 1,5 ch,

Første linje: -1,5 ch

ENG-2

8. Playback Mode:

8.1 Under the preview status, press MODE button twice, and switch to Playback Mode; enter

Playback Mode, and select the ﬁle you want to play back via the menu, as shown in the

following Figu re:

10. Menu Operation:

There are diﬀerent menus under every work mode, and the following Menus are for your

reference:

Video Recording Mode Menu Photo Mode Menu

Playback Mode Menu System Setting Mode Menu

Operation: Press OK button for a while, and LCD will display relevant Mode Menu; press OK

cursor to select a Menu, and then press T or W button to move the cursor up or down; press OK

again for conﬁrmation, and press Power button to go back or quit the Menu Mode. Chosen item

in the menu will be emphasized with background color.

Connect to HD TV:

It is possible to connect the camera to HD TV via HDMI Cable (as shown in the following

Figure), and the display signal of the camera will be automatically transmitted to HD TV,

allowing the user to view HD videos or photos via HD TV.

TTeecchhnniiccaall PPaarraammeetteerrss

Image Sensor

1.0 3 CMOS

Function Mode

Video Recording, Photo and Playback Mode

Lens

F2.4 f=3.0 mm

LCD

1.77 inches LCD

Picture Resolution

12M 8M 5M 3M 2M and 1M , , , , ,

Video Resolution

FHD 1920x1080(25fps) interpolation, 1280x720(30fps), VGA: HD: :

640x480(30fp)

File Formats

Video

AVI

Picture

JPG

Storage Medium

TF Card (32GB at most)

USB Port

High-speed USB 2.0 port

Power Supply

External 3.7V chargeable lithium battery 400mAh

Dimensions

59x41x24.5mm

Warning

• Lithium battery inside!

• Do not try to open the product!

• Do not expose to heat, water, moisture, direct

sunlight!

CAUTION!

Electric and electronic equipment and included batteries contains materials,

components and substances that can be hazardous to your health and the

environment, if the waste material (discarded electric and electronic equipment and

batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed out trash

can symbol, seen below. This symbol signiﬁes that electric and electronic

equipment and batteries should not be disposed of with other household waste, but

should be disposed of separately.

As the end user it is important that you submit your used batteries to the approriate

and designated facility. In this manner you make sure that the batteries are recycled

in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic

equipment and batteries can either be submitted free of charge at recycling stations

and other collection sites, or be collected from the households. Additional

information is available at the technical department of your city.

Hereby, Inter Sales A/S, declares that this product is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC. A

copy of the Declaration of conformity may be obtained at:

Inter Sales A/S

Stavneagervej 22,

DK-8250 Egaa

Denmark

Imported by:

DENVER ELECTRONICS A/S

Stavneagervej 22

DK-8250 Egaa

Denmark

www.facebook.com/denverelectronics

Diagram of connection

Formateret: Skriftfarve: Rød

Specyfikacje produktu

Marka:	Denver
Kategoria:	kamera wideo
Model:	ACT-1013

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Denver ACT-1013, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje kamera wideo Denver

Denver ACT-5002 Instrukcja

14 Października 2024

Denver ACK-8064 Instrukcja

3 Października 2024

Denver WCM-8010 MK3 Instrukcja

28 Września 2024

Denver ACG-8050W Actioncam Instrukcja

27 Września 2024

Denver ACT-1303 Instrukcja

5 Września 2024

Denver ACT-1013 Instrukcja

1 Września 2024

Denver ACT-5030W Instrukcja

31 Sierpnia 2024

Denver ACT-5001 Instrukcja

30 Sierpnia 2024

Denver ACG-8050W Instrukcja

29 Sierpnia 2024

Denver ACT-5020TW Instrukcja

22 Sierpnia 2024

Instrukcje kamera wideo

Najnowsze instrukcje dla kamera wideo

Sony E Instrukcja

15 Stycznia 2025

Zoom Q4 Instrukcja

14 Stycznia 2025

PCE Instruments PCE-TLK 60 Instrukcja

14 Stycznia 2025

Nedis WCAM180GN Instrukcja

14 Stycznia 2025

Nedis WCAM280GN Instrukcja

14 Stycznia 2025

Oregon Scientific ATC Chameleon Instrukcja

11 Stycznia 2025

PCE Instruments PCE-MM 800 Instrukcja

10 Stycznia 2025

PCE Instruments PCE-LCM 50 Instrukcja

10 Stycznia 2025

PCE Instruments PCE-VM 21 Instrukcja

10 Stycznia 2025

PCE Instruments PCE-PIC 20 Instrukcja

8 Stycznia 2025