Instrukcja obsługi Denon DN-300BR
Denon
odtwarzacz blu-ray
DN-300BR
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Denon DN-300BR (28 stron) w kategorii odtwarzacz blu-ray. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/28
User Guide English
(
2
–
6
)
Guía del usuario Español
(
7
–
11
)
Guide d’utilisation Français
(
12
–
16
)
Guida per l’uso Italiano
(
17
–
21
)
Benutzerhandbuch Deutsch
(
22
–
26
)
Appendix English
(
27
)
2
User Guide ( )English
Introduction
DN-300BR is a Bluetooth® audio receiver with professional-grade audio outputs. It lets you
add wireless stereo Bluetooth audio reception to any professional audio system. Once you
pair your Bluetooth device to DN-300BR, you can send your device’s audio signal out DN-
300BR’s balanced XLR or unbalanced RCA outputs to your mixer, loudspeakers, or
amplification system.
Please see this guide’s Setup chapter to learn how to integrate DN-300BR with your audio
system, and then refer to the Operation chapter to start using DN-300BR.
Box Contents
DN-300BR
Removable Bluetooth Antenna
2-Pin Euroblock Connector
Power Cable
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit denonpro.com.
For additional product support, visit denonpro.com/support.
3
Features
Front Panel
1. Power Button: Press this button to turn the unit on or off. Make sure the AC In is properly
connected to a power outlet.
2. BNC Antenna Terminal: Connect the included removable Bluetooth antenna to this BNC
connector. The antenna receives and transmits the Bluetooth signal from a paired Bluetooth
device. DN-300BR has a range of up to 100 feet (33 meters).
Note: Make sure to attach only one antenna to either the front panel or rear panel Terminal at a
time. Using two antennae will negatively affect the performance of the Bluetooth receiver.
3. Status Light: This LED indicates the DN-300BR’s Bluetooth pairing status:
• Flashing slowly (approximately twice every 3 seconds): DN-300BR is not paired to a
Bluetooth device. DN-300BR will automatically try to pair with a previously paired Bluetooth
device within range, if any.
• Flashing quickly (approximately :twice per second) DN-300BR can be paired to any
available Bluetooth device.
• Solidly lit: DN-300BR is paired to a Bluetooth device.
See Operation to learn how to pair/unpair a Bluetooth device to/from DN-300BR.
4. Pair Button: Press this button briefly to make DN-300BR available for pairing to a nearby
Bluetooth device. Press and hold this button for 3 seconds to break any previous Bluetooth
connections and remove the last paired device from the memory of the Bluetooth module. See
Operation for more information.
5. Level Knob: Turn this knob to adjust the output volume level (sent to the balanced and
unbalanced outputs).
Rear Panel
1. BNC Antenna Terminal: Connect the included removable Bluetooth antenna to this BNC
connector. The antenna receives and transmits the Bluetooth signal from a paired Bluetooth
device. DN-300BR has a range of up to 100 feet (33 meters).
Note: Make sure to attach only one antenna to either the front panel or rear panel Terminal at a
time. Using two antennae will negatively affect the performance of the Bluetooth receiver.
2. Remote Pairing Connector: Use the included 2-pin Euroblock connector to add a remote
pairing button (not included) to this connector.
3. Outputs ( )Balanced XLR : These outputs send the audio from a paired Bluetooth device. Use
XLR cables to connect these outputs to your loudspeakers, mixer, etc. See Setup for more
information.
4. Outputs ( )Unbalanced RCA : These outputs send the audio from a paired Bluetooth device. Use
standard RCA cables to connect these outputs to loudspeakers, mixer, etc. See Setup for more
information.
5. AC Input: Use the included power cable to connect this input to a power outlet. See Setup for
more information.
6. Fuse: If the fuse blows, replace it with a fuse of the same type. Using a fuse with an incorrect
rating can damage the unit and/or fuse.
1
2
3 4 5
1
2
3 4 5
6
Specyfikacje produktu
| Marka: | Denon |
| Kategoria: | odtwarzacz blu-ray |
| Model: | DN-300BR |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Denon DN-300BR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje odtwarzacz blu-ray Denon
17 Września 2024
26 Sierpnia 2024
21 Sierpnia 2024
20 Sierpnia 2024
13 Sierpnia 2024
8 Sierpnia 2024
Instrukcje odtwarzacz blu-ray
- odtwarzacz blu-ray Sony
- odtwarzacz blu-ray Samsung
- odtwarzacz blu-ray LG
- odtwarzacz blu-ray Sharp
- odtwarzacz blu-ray Pioneer
- odtwarzacz blu-ray Philips
- odtwarzacz blu-ray Onkyo
- odtwarzacz blu-ray Panasonic
- odtwarzacz blu-ray Asus
- odtwarzacz blu-ray Nedis
- odtwarzacz blu-ray Lenco
- odtwarzacz blu-ray Toshiba
- odtwarzacz blu-ray Grundig
- odtwarzacz blu-ray Cambridge
- odtwarzacz blu-ray JVC
- odtwarzacz blu-ray Oppo
- odtwarzacz blu-ray Pyle
- odtwarzacz blu-ray Marantz
- odtwarzacz blu-ray NAD
- odtwarzacz blu-ray Harman Kardon
- odtwarzacz blu-ray Verbatim
- odtwarzacz blu-ray McIntosh
- odtwarzacz blu-ray Hitachi
- odtwarzacz blu-ray Tascam
- odtwarzacz blu-ray Laser
- odtwarzacz blu-ray Sherwood
- odtwarzacz blu-ray Vizio
- odtwarzacz blu-ray Peaq
- odtwarzacz blu-ray Dune
Najnowsze instrukcje dla odtwarzacz blu-ray
30 Grudnia 2025
30 Grudnia 2025
22 Grudnia 2024
22 Grudnia 2024
22 Grudnia 2024
22 Grudnia 2024
22 Grudnia 2024
8 Października 2024
8 Października 2024
8 Października 2024