Instrukcja obsługi Dean SR142G

Dean frytkownica SR142G

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dean SR142G (14 stron) w kategorii frytkownica. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
Price: $10.00
PRINTED IN THE
UNITED STATES
For Service, Call (318) 865-1711
Dean, 8700 Line Avenue, PO Box 51000,
Shreveport, Louisiana 71135-1000
Shipping Address: 8700 Line Avenue,
Shreveport, Louisiana 71106
MARCH 2008
NON-CE &
Super Runner Series Gas Fryers
Installation & Operation Manual
Series SR42, SR52 & SR62
*8195999*
NOTICE
This appliance is intended for professional use only and is to be operated by qualied personnel only. A
Frymaster/DEAN Factory Authorized Service Center (FASC) or other qualified professional should
perform installation, maintenance, and repairs. Installation, maintenance, or repairs by unqualified
personnel may void the manufacturer’s warranty.
NOTICE
This equipment must be installed in accordance with the appropriate national and local codes of the
country and/or region in which the appliance is installed.
NOTICE TO U.S. CUSTOMERS
This equipment is to be installed in compliance with the basic plumbing code of the Building Officials and
Code Administrators International, Inc. (BOCA) and the Food Service Sanitation Manual of the U.S. Food
and Drug Administration.
DANGER
Improper installation, adjustment, maintenance or service, and unauthorized alterations or modifications
can cause property damage, injury, or death. Read the installation, operating, and service instructions
thoroughly before installing or servicing this equipment. Only qualified service personnel may convert
this appliance to use a gas other than that for which it was originally congured.
DANGER
Adequate means must be provided to limit the movement of this appliance without depending upon the
gas line connection. Single fryers equipped with legs must be stabilized by installing anchor straps. If a
flexible gas line is used, an additional restraining cable must be connected at all times when the fryer is
in use.
DANGER
The front ledge of the fryer is not a step! Do not stand on the fryer. Serious injury can result from slips
or contact with the hot oil.
DANGER
Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other
appliance.
DANGER
Instructions to be followed in the event the operator smells gas or otherwise detects a gas leak must be
posted in a prominent location. This information can be obtained from the local gas company or gas
supplier.
NOTICE
IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS ENODIS EQUIPMENT
OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART PURCHASED DIRECTLY FROM
FRYMASTER/DEAN, OR ANY OF ITS AUTHORIZED SERVICE CENTERS, AND/OR THE PART BEING USED
IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS WARRANTY WILL BE VOID. FURTHER,
FRYMASTER/DEAN AND ITS AFFILIATES WILL NOT BE LIABLE FOR ANY CLAIMS, DAMAGES OR
EXPENSES INCURRED BY THE CUSTOMER WHICH ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN
PART, DUE TO THE INSTALLATION OF ANY MODIFIED PART AND/OR PART RECEIVED FROM AN
UNAUTHORIZED SERVICE CENTER.
NOTICE
The Commonwealth of Massachusetts requires any and all gas products to be installed by a
licensed plumber or pipe fitter.
SUPER RUNNER SERIES GAS FRYERS
CHAPTER 1: INSTALLATION INSTRUCTIONS
1-1
1.1 Safety Information
Before attempting to operate your unit, read the instructions in this manual thoroughly. Throughout this manual you will
find notations enclosed in double-bordered boxes with the symbol . The information contained in the box concerns
actions or conditions that may cause or result in injury to personnel or damage to your system, and/or cause your system
to malfunction.
1.2 General Installation Instructions
DANGER
Building codes prohibit a fryer with its open frypot of hot oil being installed beside an open flame of any
type, including those of broilers and ranges.
DANGER
This appliance must be installed with sufficient ventilation to prevent the occurrence of unacceptable
concentrations of substances harmful to the health of personnel in the room where it is installed.
DANGER
No structural material on the fryer should be altered or removed to accommodate placement of the fryer
under a hood.
DANGER
Single fryers must be restrained to prevent tipping when installed in order to avoid the splashing of hot
liquid. The means of restraint may be the manner of installation, such as connection to battery of
appliances or installing the fryer in an alcove, or by separate means, such as straps or chains.
DANGER
Do not attach an apron drainboard to a single unit. The appliance may become unstable, tip over, and
cause injury. The appliance area must be free and clear of combustible material at all times.
NOTICE
This appliance is only for professional use and shall be used by qualified personnel only.
CLEARANCE AND VENTILATION
This fryer must be installed with a 6-inch (150-mm) clearance at both sides and back when installed adjacent to
combustible construction. No clearance is required when installed adjacent to non-combustible construction. A
minimum of 24-inches (600-mm) clearance should be provided at the front of the fryer.
The fryer flue opening must not be placed close to the intake of an exhaust fan, and the fryer must never have its flue
extended in a "chimney" fashion. An extended flue will change the combustion characteristics of the fryer. To provide
the airflow necessary for good combustion and burner operation, the areas surrounding the fryer front, sides, and rear
must be kept clear and unobstructed.
The fryer must be installed in an area with an adequate air supply and adequate ventilation. Adequate distances must be
maintained from the flue outlet of the fryer to the lower edge of the ventilation filter bank. Filters should be installed at
an angle of 45°. Place a drip tray beneath the lowest edge of the filter. For U.S. installation, NFPA standard No. 96
states, "A minimum distance of 18-inches (450-mm) should be maintained between the flue outlet and the lower edge of
the grease filter". Frymaster recommends that the minimum distance be 24-inches (600-mm) from the flue outlet to the
bottom edge of the filter.
INSTALLATION
NOTE: Unless special ordered, this fryer is designed for operation at altitudes of 2000 feet (610 meters) and below.
The unit must be modified for operation above 2000 feet (610 meters).

Specyfikacje produktu

Marka: Dean
Kategoria: frytkownica
Model: SR142G

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dean SR142G, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje frytkownica Dean

Dean

Dean D150G Instrukcja

14 Września 2024
Dean

Dean SR142G Instrukcja

8 Września 2024
Dean

Dean SR152G Instrukcja

7 Września 2024
Dean

Dean SR162G Instrukcja

2 Września 2024

Instrukcje frytkownica

Najnowsze instrukcje dla frytkownica

Palson

Palson 30498 bristol Instrukcja

15 Października 2024
Palson

Palson titan 30494 Instrukcja

15 Października 2024
Princess

Princess 182657 Instrukcja

14 Października 2024
Bartscher

Bartscher BF 21E Instrukcja

12 Października 2024
Tefal

Tefal ActiFry AW9500 Instrukcja

10 Października 2024
Cecotec

Cecotec Cecofry Fantastik Window 6500 Instrukcja

9 Października 2024
Cecotec

Cecotec Cecofry Experience 6000 M Instrukcja

9 Października 2024
Cecotec

Cecotec Cecofry Full Inox 5500 Pro Instrukcja

9 Października 2024
Cecotec

Cecotec Cecofry Fantastik 5000 Instrukcja

9 Października 2024
Cecotec

Cecotec Cecofry Drip 5000 Instrukcja

9 Października 2024