Instrukcja obsługi Deaf Bonce Apocalypse AP-D50 NEO

Deaf Bonce Speaker Apocalypse AP-D50 NEO

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Deaf Bonce Apocalypse AP-D50 NEO (14 stron) w kategorii Speaker. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/14
1 . I N T R O D U C T I O N
1. Fasten the audio system properly when installing it in the vehicle. If the component is disconnected during driving, it may
cause serious damage to the passengers of the car or another vehicle.
2. Before installing the components, if possible store the product in the package passengers of the car to avoid accidental
damage.
3. Be careful when installing and dismantling the acoustic systems! Do not let the tweeter drop to avoid damage of its moving
parts.
4. When working with tools follow safety rules.
5. Before the installation switch off the head unit and all other audio devices to avoid their damage.
6. Make sure that the location of the audio system does not hinder the proper operation of mechanical and electrical devices
of the vehicle.
7. Do not install components in places exposed to water, excessive humidity, high or low temperature, dust or dirt.
ATTENTION!!! The product may be operated at +5 to +40 °C. In case of moisture condensation, allow the product to dry.
8. When drilling or cutting out holes in the body of the car, make sure that there are no cables or any other important
construction elements under a selected area or inside it.
9. When stretching the speaker cables make sure that they are not in contact with sharp edges or moving mechanical devices.
Make sure that they are firmly fixed and protected over the entire length.
10. The diameter of the speaker cables must be selected in accordance with the length and applied power.
11. Never stretch the cables outside the car and near the moving parts of the car. This can lead to destruction of the insulating
layer, short circuit and fire.
12. To protect the cables use rubber gaskets if the wire passes through a hole in the plate, or other similar materials if it lies
close to the parts exposed to heat.
13. Possible commutation versions are presented on the following pages. Using the data from the table below, check the
minimum resistance of your amplifier specified by the manufacturer.
CAUTION!!! High sound pressure can damage your health!
Please use the common sense when controlling volume!
2 . S A F E T Y I N S T R U C T I O N S
3 . W I R I N G D I A G R A M S
EN
Possible commutation versions are presented on the following pages. Using the data from the diagram below, check the
minimum resistance and the connection specified by the manufacturer of your amplifier. Do not expose the amplifier to loads
below the predetermined value.
Use these formulas to calculate the resistance for various types of connections.
Thank you for purchasing this Deaf Bonce product of Apocalypse series! Our company is committed to the creation of
extremely high-profile systems with no loss of quality.
To ensure proper use, please carefully read through this manual before using this product. It is especially important that you
read and observe caution’s in this manual. Please keep the manual in a safe and accessible place for future reference.

Specyfikacje produktu

Marka: Deaf Bonce
Kategoria: Speaker
Model: Apocalypse AP-D50 NEO

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Deaf Bonce Apocalypse AP-D50 NEO, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Speaker Deaf Bonce

Instrukcje Speaker

Najnowsze instrukcje dla Speaker

Atlas

Atlas ICM812 Instrukcja

6 Października 2024
Kicker

Kicker 48KMXL8 Instrukcja

6 Października 2024
Kicker

Kicker 46KMFC8 Instrukcja

6 Października 2024
Kicker

Kicker 40PS44 Instrukcja

6 Października 2024
Ikea

Ikea VAPPEBY 505.371.88 Instrukcja

6 Października 2024
Ikea

Ikea VAPPEBY 205.176.05 Instrukcja

6 Października 2024
Ikea

Ikea VAPPEBY 405.173.84 Instrukcja

6 Października 2024