Instrukcja obsługi DataVideo MCU-100P

DataVideo Zdalne sterowanie MCU-100P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DataVideo MCU-100P (21 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/21
2
Table of Contents
FCC COMPLIANCE STATEMENT 3...............................................................................
WARNINGS AND PRECAUTIONS ............................................................................. 3
WARRANTY ............................................................................................................ 4
STANDARD WARRANTY .................................................................................................. 4
TWO YEAR WARRANTY .................................................................................................. 4
DISPOSAL ............................................................................................................... 4
1. INTRODUCTION .................................................................................................. 5
1.1 FEATURES ........................................................................................................... 5
1.2 COMPATIBLE SONY CAMERA MODELS ...................................................................... 5
2. SYSTEM DIAGRAM .............................................................................................. 6
3. CONNECTIONS AND CONTROLS .......................................................................... 7
3.1 REAR IEWV ......................................................................................................... 7
Adapter Box (AD- 1S) ............................................................................................. 7
3.2 FRONT IEWV ....................................................................................................... 9
Keyboard Control Guide ........................................................................................ 9
Seven Segment Display and LED Indicators ......................................................... 14
Operation M LOCK and NORMALodes – .............................................................. 15
4. CAMERA SETUPS .............................................................................................. 16
4.1 HOW TO COPY SETTINGS SET BY THE MCU 200S- FROM ONE CAMERA TO ANOTHER .............. 16
4.2 HOW TO STORE / -1 / MU-2 / MU- RECALL SETTINGS FROM INTERNAL MEMORY (MU 3) ...... 16
4.3 HOW TO SAVE / LOAD THE CAMCORDER SETTINGS TO / FROM A PC ................................... 17
5. FIRMWARE UPDATE PROCEDURE ...................................................................... 18
5.1 HOW TO UPDATE THE MCU 200S- FIRMWARE ............................................................. 18
5.2 HOW TO UPDATE THE AD-1S FIRMWARE .................................................................... 18
6. DIMENSIONS .................................................................................................... 19
7. SPECIFICATIONS ................................................................................................ 20
SERVICE & SUPPORT ............................................................................................ 21
Disclaimer of Product & Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will
try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some
information in this manual, from time to time, may not be correct or may be incomplete. This manual may contain
typing errors, omissions or incorrect information. Datavideo Technologies always recommend that you double check
the information in this document for accuracy before making any purchase decision or using the product. Datavideo
Technologies is not responsible for any omissions or errors, or for any subsequent loss or damage caused by using the
information contained within this manual. Further advice on the content of this manual or on the product can be
obtained by contacting your local Datavideo Office or dealer.
3
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious
damage.
6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure
safe and reliable operation of this unit, and to protect it from overheating, do not block or
cover these openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the
ventilation openings on the bottom of the cabinet will be blocked. This unit should never be
placed near or over a heat register or radiator. This unit should not be placed in a built-in
installation unless proper ventilation is provided.
7. This product should only be operated from the type of power source indicated on the marking
label of the AC adapter. If you are not sure of the type of power available, consult your
Datavideo dealer or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord
will be walked on, rolled over, or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings
on the products plugged into the extension cord do not exceed the extension cord rating.
10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do
not exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may
touch dangerous voltage points or short out parts that could result in risk of fire or electric
shock. Never spill liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not attempt to service this
product yourself. Opening or removing covers that are marked “Do Not Remove” may expose
you to dangerous voltage points or other risks, and will void your warranty. Refer all service
issues to qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service personnel under the
following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust
only those controls that are covered by the operating instructions in this manual; improper
adjustment of other controls may result in damage to the unit and may often require
extensive work by a qualified technician to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.

Specyfikacje produktu

Marka: DataVideo
Kategoria: Zdalne sterowanie
Model: MCU-100P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DataVideo MCU-100P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zdalne sterowanie DataVideo

DataVideo

DataVideo WR-500 Instrukcja

24 Sierpnia 2024
DataVideo

DataVideo MCU-100P Instrukcja

6 Sierpnia 2024
DataVideo

DataVideo RMC-230 Instrukcja

5 Lipca 2024
DataVideo

DataVideo RMC-260 Instrukcja

4 Lipca 2024

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie

Neewer

Neewer RT112 Instrukcja

9 Października 2024
Neewer

Neewer RT113 Instrukcja

9 Października 2024
Zalman

Zalman ZM-VE350 Instrukcja

9 Października 2024
Canon

Canon BG-R20 Instrukcja

9 Października 2024
Canon

Canon BG-R20EP Instrukcja

9 Października 2024
Mosconi

Mosconi DSP6T8 Instrukcja

8 Października 2024
Mosconi

Mosconi RC MINI Instrukcja

8 Października 2024
Ridem

Ridem CRC UNB Instrukcja

8 Października 2024
Ridem

Ridem CRC UNW Instrukcja

8 Października 2024
ORNO

ORNO OR-GB-458 Instrukcja

8 Października 2024