Instrukcja obsługi DARTS DP4000

DARTS odbiornik DP4000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DARTS DP4000 (8 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
Phase Technology Corporation www.phasetech.com
MSE Audio 10661 Rene St. Lenexa, Kansas 66215 (855) 663-5600 www.mseaudio.com
DP4000
System Installation Guide
Thank you for purchasing Phase Technology’s
revolutionary dARTS (Digital Audio Reference The-
ater System). This exciting entertainment system
will provide the best possible sound reproduction
of music and video programming in any room envi-
ronment, and at every seat in that room.
Please take a few moments to study this Instal-
lation Guide to get the most out of your dARTS
system. Your professional installer will make every
effort to place the speakers to take into account
your room’s natural acoustics, but will also accom-
modate your needs in making them t into your
decorating plans. Phase Technology’s perfectly
matched speakers, and the Audyssey Laboratories
MultEQ XT 32 room correction software as imple-
mented by your installer, will then work together
to overcome the acoustic anomalies of your room
and give you ideal sound at every seating location.
Contents:
Safety Instructions 2
Audyssey MultEQ XT32 Installation 3
DP4000 Features 3
Speaker Placement 3
System Wiring and Connection 4
Caring for Your DP4000 7
Maintenance and Service 7
Warranty 7
DP4000 Features:
Audyssey MultEQ XT32 callibration software
Molded aluminum enclosure
Large dual mode power supply
Eight (8) XLR balanced Inputs
Sixteen (16) congurable input/output channels
Controls up to four (4) rooms of stereo
Auto switch
1. Read Instructions - All the safety and operating
instructions should be read before the appliance is
operated.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow Instructions - All operating and other instructions
should be followed.
5. Water and Moisture - The appliance should not be
used near water - for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, etc.
6. Carts and Stands - The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
PORTABLE CART WARNING
7. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
8. Ventilation - The appliance should be situated so that
its location or position does not interfere with its proper
SAFETY INSTRUCTIONS
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or placed in a built-in
installation, such as a bookcase or cabinet that may
impede the ow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat
sources such as radiators, stoves, or other appliances that
produce heat.
10. Power Source - The appliance should be connected to
a power supply only of the type described in the operating
instructions or as marked on the appliance.
11. Power Cord Protection - Power supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed up or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
12. Cleaning - The appliance should be cleaned only as
recommended by the manufacturer.
13. Nonuse Periods - The power cord of the appliance
should be unplugged from the outlet when left unused for
a long period of time.
14. Object and Liquid Entry - Care should be taken so that
neither objects fall nor liquids spill into the inside of the
appliance.
15. Damage Requiring Service - The application should be
serviced by qualied service personnel when:
a. the power supply cord or the plug has been damaged,
b. objects have fallen onto or liquid has been spilled into
the appliance,
c. the appliance has been exposed to rain,
d. the appliance does not appear to operate normally or
exhibits a marked change in performance, or
e. the appliance has been dropped or the cabinet
damaged.
16. Servicing - The user should not attempt to service the
appliance beyond those means described in the operating
instructions. All other servicing should be referred to
qualied service personnel.
17. Grounding or Polarization - Precautions should be
taken so that the grounding or polarization means of an
appliance is not defeated.
Explanation of Graphical Symbols
The lightning ash with arrowhead symbol, within
an equilateral triangle, is intended to alert you to the
presence of un-insulated “dangerous voltage: within the
product’s enclosure that may be off sufcient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION: To reduce the risk of electric shock, do not remove cover (or
back). No user-serviceable parts inside. Refer servicing to qualied service
personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
APPLICABLE FOR USA, CANADA OR WHERE
APPROVED FOR USAGE
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE PLUG TO WIDE SLOT, INSERT FULLY.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRESE
ET POUSSER JUSQU AU FOND.
2
Audyssey MultEQ XT32 Software Installation
Referring to Audyssey’s calibration guide, your installer will use a professional calibration microphone
and a digital audio interface with his laptop computer to analyze your room’s acoustic properties as they
affect the entire seating area. This will give him the information to properly set up the volume levels and
delays for each speaker, and then it will automatically generate a series of correction lters to load into
your Phase Technology DP4000 amplier/speaker controller. This correction process will then return your
speakers to their original perfectly matched levels, and remove the room’s harmful acoustic contribu-
tions, leaving you with superb sonic performance that sounds the same at every seat in the room.
Speaker Placement
Phase Technology’s ability to precisely match each speaker to one another yields a much more envelop-
ing and accurate soundeld. This immersive entertainment experience will be enhanced if you will follow
a few basic rules of speaker placement. The front speakers (left, center, right) should all be placed in as
close to a horizontal line as possible, and should be at or slightly above ear level while seated. The left
and right speakers should be far enough apart (6- 8 feet if seated no more then 12 feet from your video
display) to separate the information from each channel, but not so far as to create a discontinuity with
the image on the video display. With a large projection screen, they should be placed as close to the
sides of the screen as is practical. In addition to being in line with the front channels, the center speaker
should be as close to the center of the display as possible, whether above/below the display, or behind a
perforated projection screen. Phase Technology speakers are magnetically shielded so they will not inter-
fere with any type of television set. Please place the included rubber feet on the bottom corners of each
speaker to keep it from vibrating against the shelf or stand on which it sits.
Each of the dARTS speakers (except for subwoofers) includes Phase Technology’s acclaimed variable-
axis soft dome tweeters. This allows your installer to direct high frequencies toward your listening loca-
tion for even greater latitude in speaker placement, and more precise imaging and localization of sound.
Please adjust these tweeters by carefully pressing on the outer rim of the housing only, avoiding contact
with the actual soft dome speaker element. These adjustments, if needed, should be done prior to your
installer calibrating the system to your room, so the correction process will read the tweeters’ energy ac-
curately at each listening position.
The surround speakers should be placed well above ear level in most rooms. Whether you are using di-
rect- radiating speakers or our switchable dipolar/bipolar speakers for the surround channels, please pay
attention to placing them to create a large and enveloping soundeld. In a 5.1-channel conguration, you
will use one pair of surround speakers. If your listening area is near the back wall, the best results can of-
ten be obtained by placing the surround speakers on the side walls, centered on your listening positions.
With speakers directly to the sides, switching the surround speakers into “Dipole” mode (with their front-
panel toggle switch) will a very diffuse, non-directional soundeld. If you prefer to have more localization
of the surround effects, select the “Bipole” mode or use direct-radiating speakers to match the front
channels. If your seating is away from the back wall, you can choose to mount your surround channels
either beside or behind the listening position. Experiment with both “Dipole” and “Bipole” surround set-
tings with your installer to see which sounds best to you, so he can calibrate the room to your taste.
3

Specyfikacje produktu

Marka: DARTS
Kategoria: odbiornik
Model: DP4000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DARTS DP4000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik DARTS

DARTS

DARTS DP4000 Instrukcja

20 Lutego 2025

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

ETON

ETON MA 1 Instrukcja

19 Marca 2025
Elipson

Elipson P1 Instrukcja

14 Marca 2025
Elipson

Elipson Stream S300 Xi Instrukcja

14 Marca 2025
Elipson

Elipson WIIM Mini Instrukcja

14 Marca 2025
KanexPro

KanexPro SP-1X16SL18G Instrukcja

13 Marca 2025
Marshall Electronics

Marshall Electronics VDA-108-3GS Instrukcja

13 Marca 2025
Rega

Rega Brio MK7 Instrukcja

12 Marca 2025
Rexing

Rexing RoadMate CPStream Instrukcja

12 Marca 2025
Mtx Audio

Mtx Audio Thunder TH2500.1 Instrukcja

11 Marca 2025
Mtx Audio

Mtx Audio Thunder TH1500.1 Instrukcja

11 Marca 2025