Instrukcja obsługi Dangerous Music 2-BUS-XT


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dangerous Music 2-BUS-XT (24 stron) w kategorii Ręczny blender. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
SAFETY REVIEW
The Exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying this product.
Certain precautions should be taken when using electrical products. Please observe
the safety hints by reading the manual and obtaining qualified help if necessary to
adhere to the precautions.
1. Always use a properly grounded power supply cord with this product. Please do not
defeat the ground pin on the mains plug. This connection provides earth to the chassis
and signal grounds inside the device for clean and quiet operation.
2. Avoid high temperature operation in equipment racks by providing air circulation.
The number one killer of electronic gear is HEAT. Vented rack panels may look like
wasted space to an interior decorator, but they look like beauty to a technician or
equipment designer! If the front panel is hot, it is roasting inside the box.
3. Avoid areas of high magnetic fields. The steel chassis is designed to shield the
circuits from EMI and RFI (magnetic and radio interference). When installing equipment
in racks, it is prudent to put power amplifiers and large power supplies at least several
rack spaces, if not in a different rack, away from equipment that deals with low level
signals. Separation of high level and low level equipment can pre-empt trouble caused
by heat and EMI.
4. Care should be taken to avoid liquid spills around equipment. If a spill occurs, please
shut off the gear and disconnect the mains. A qualified technician should investigate
accidents to prevent further equipment damage or personnel hazards caused by spills.
5. If one is uncomfortable with opening gear and changing jumpers or making
adjustments, please seek qualified help if necessary.
6. If adjustments or jumper changes are required, please disconnect the mains plug
before opening the top. Dropped screws or tools on a live circuit board can manifest
themselves as burn marks and smoked components. While we feel your pain, (been
there) subsequent damage is not covered by the warranty.
Dangerous Music Group, LLC reserves the right to change the specifications or modify
the designs of its equipment. Registering online is our way of keeping in touch with
users of our equipment should this become necessary. Registration information is
always kept confidential and never disclosed to third parties for any reason. Company
contact information is on the last page of this manual.
The CE sign on this product signifies the fact that the ® has been 2-BUS-XT
tested and verified to conform to the applicable standards of 89/336/EEC.
EN55103-1 (emissions) EN61000-2 (immunity) and EN60065:2002 (safety re-
quirements)
This product uses components of the types and quantities that comply with
the EC RoHS standard 2002/95/EC. A list of suppliers and materials is avail-
able from DMG. We tightly control production to use top quality materials.
i | DANGEROUS MUSIC
| II
THANK YOU
Thank you for joining the Dangerous Music family! You will receive years of reliable pleasue from our
gear due to careful design, construction, and component choices by recording industry veterans.
The 2-BUS-XT is designed to inspire your musical genes. No matter if you’re on the road or in
studio, 2-BUS-XT allows you to create with unparalleled accuracy, headroom, stereo separation
and soundstage- propelling composition, performance, mixing and mastering to new heights like
Mallory up Everest. (At the time of writing this manual, the search for his camera was ongoing.)
Though the box is overwhelmingly simple in appearance, there are comprehensive tips and
application notes in this user’s guide, so don’t skip the read. Crack a beer and get listening-
mek yc
President and Audio
ABOUT DANGEROUS MUSIC
Dangerous Music is composed exclusively of musicians, studio owners, producers and engineers
the very same group of people for whom Dangerous products are designed. Thats the magic:
living the recording experience on both sides of the control room glass and constantly working to
improve it. Without shareholders pimping profit at the expense of the artists (us!) using the gear.
From the inception, building to a price point” was ignored in favor of: Audio Quality First. Our brain
trust at Dangerous determines the product’s function, feature set and how to make it sound as
transparent, musical and versatile as humanly possible. We build the gear we want to use.
Sacrifice Nothing®. This is our founding credo. The results are products that resurrect dynamic
range, punch, intelligibility and emotion. These high-fidelity, uncompromising signal paths are
achieved by harnessing over 30 years of Chris Muths design wizardry; creator of infamous custom
black boxes for world class facilities like Hit Factory, Masterdisk, Absolute Audio and Sterling
Sound Mastering. He leads our design team into the future and once in beta, the critical listening
skills of golden-eared luminaries are applied, with the result being musical tools that fulfill the
actual needs of today’s flexible computer based studio.
TRACK • MIX • MASTER


Specyfikacje produktu

Marka: Dangerous Music
Kategoria: Ręczny blender
Model: 2-BUS-XT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dangerous Music 2-BUS-XT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Ręczny blender Dangerous Music

Instrukcje Ręczny blender

Najnowsze instrukcje dla Ręczny blender

Klarstein

Klarstein Manhattan Instrukcja

11 Października 2024
Caso

Caso HB 2400 Pro XL Instrukcja

10 Października 2024
Hyundai

Hyundai HM 707 Instrukcja

9 Października 2024
A-Designs

A-Designs Mix Factory Instrukcja

9 Października 2024
Tefal

Tefal HT4005 Instrukcja

9 Października 2024
Yorkville

Yorkville MM5D Instrukcja

8 Października 2024
Rolls

Rolls MX410 Instrukcja

8 Października 2024
Muse

Muse MS-05 HB Instrukcja

8 Października 2024
KitchenAid

KitchenAid KHM312 Instrukcja

8 Października 2024