Instrukcja obsługi Dangerous Music 2-BUS LT

Dangerous Music Konsola miksująca 2-BUS LT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dangerous Music 2-BUS LT (11 stron) w kategorii Konsola miksująca. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
The Dangerous Music 2Bus LT Manual
Thank you for choosing products from the exciting line of Dangerous Music
recording equipment. Many years of dependable and trouble free
performance can be expected from our gear. This has been made possible by
careful design, construction, and top-shelf component choices by recording
industry veterans. This manual will assist the user in the installation of the
2Bus LT and calibration of the system.
Contents
Introduction……………………………….. 1
Safety review……………………………... 2
Overview and Hook up………………….... 3
Front Panel and Use………………………. 4
Calibration………………………………... 5
Balanced connections.................................. 6
Unbalanced connections………………….. 7
Grounding revisited………………………. 8
Connector Pin-Outs………………...…….. 10
Specifications…………………………….. 11
Safety Review
Certain precautions should be taken when using electrical products. Please observe the safety hints by
reading the manual and obtaining qualified help if necessary to adhere to the precautions.
1. Always use a properly grounded power supply cord with this product. Please do
not defeat the ground pin on the mains plug. This connection provides earth to the chassis and
signal grounds inside the device for clean and quiet operation. The “Grounding and interface”
section can help the user/installer clear up a buzz problem if one develops.
2. Avoid high temperature operation in equipment racks by providing air
circulation. The number one killer of electronic gear is HEAT. Vented rack panels may look like
wasted space to an interior decorator, but they look like beauty to a technician or equipment
designer! If the front panel is hot, it is roasting inside the box.
3. Avoid areas of high magnetic fields. The steel chassis of 2Bus LT is designed to
shield the circuits from EMI and RFI (magnetic and radio interference). When installing
equipment in racks, it is prudent to put power amplifiers and large power supplies at least several
rack spaces, if not in a different rack, away from equipment that deals with low level signals.
Separation of high level and low level equipment can pre-empt trouble caused by heat and EMI.
4. Care should be taken to avoid liquid spills around equipment. If a spill occurs,
please shut off the gear and disconnect the mains. A qualified technician should investigate
accidents to prevent further equipment damage or personnel hazards caused by spills.
5. If one is uncomfortable with opening gear and changing jumpers or making
adjustments, please seek qualified help if necessary.
6. If adjustments or jumper changes are required, please disconnect the mains plug
before opening the top. Dropped screws or tools on a live circuit board can manifest themselves
as burn marks and smoked components. While we feel your pain, (been there) subsequent damage
is not covered by the warranty.
Dangerous Music Incorporated reserves the right to change the specifications or modify the designs
of its equipment. Sending in the registration card is our way of keeping in touch with users of our
equipment should this become necessary. Registration information is always kept confidential and never
disclosed to third parties for any reason. Company contact information is on the last page of this manual.
The CE sign on this product signifies the fact that the 2Bus LT has been tested
and verified to conform to the applicable standards of 89/336/EEC. EN55103-1
(emissions) EN55103-2 (immunity) and EN60065:2002 (safety requirements)
-2-
Overview
The 2Bus LT is a 16x2 summing amplifier designed to help the users of digital audio
workstations achieve better mix performance through the use of existing equipment in
their studios. The designers and their colleagues have noted that while DAWs offer
unprecedented flexibility in multitrack recording and editing, the resulting mixes from
these systems generally don’t recording systems in terms equal those of high-end analog
of sound quality, preservation of spatial detail, and ‘no latency’ ergonomics. In today’s
portable environment and with the cost of maintaining and housing legendary recording
equipment, the choice of a big desk is impractical for many users of DAW systems. We
want to bring together the best of both worlds. It is in this spirit that the Dangerous
engineering team is designing and manufacturing an exciting array of summing, mixing,
monitoring, metering, and mastering equipment to meet the needs of today’s recording
engineers, producers, and artists.
Hook up
The 2Bus LT is designed to mix the outputs of two eight channel D/A converters to a
stereo recorder (16x2). The 2Bus LT is easily stackable to increase channel numbers and
system functions when linked with another 2Bus LT, Mixer, Monitor, or 2Bus. All the
XLR’s are pin 2 hot and the connector groups are described as follows:
EXPANSION IN Patch from the Main Output of a 2Bus, LT, or Mixer to sum into
the mix bus.
IN 1-8, IN 9-16 The inputs are arranged into eight sets of XLR’s. They can be
plugged into directly from the D/A converters but system
flexibility (and fun) goes way up with the addition of a patch bay
for ease of outboard equipment use. The pin out is on page 10.
REMOTE ONLY This connector is not used.
DC IN It is best to make sure that the power supply is unplugged when
connecting the DC power cable to prevent damage to contacts in
the connectors.
MAIN OUT The Main Output feeds the mixdown A/D converter.
MON OUT These jacks have the same signal as the Main Outputs. They are to
feed the Dangerous Monitor or other monitor section.
-3-

Specyfikacje produktu

Marka: Dangerous Music
Kategoria: Konsola miksująca
Model: 2-BUS LT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dangerous Music 2-BUS LT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Konsola miksująca Dangerous Music

Dangerous Music

Dangerous Music 2-BUS LT Instrukcja

5 Października 2024
Dangerous Music

Dangerous Music BAX EQ Instrukcja

5 Października 2024
Dangerous Music

Dangerous Music 2-BUS+ Instrukcja

26 Września 2024

Instrukcje Konsola miksująca

Najnowsze instrukcje dla Konsola miksująca

Behringer

Behringer XENYX QX2442USB Instrukcja

14 Października 2024
Koenic

Koenic KHB 800 Instrukcja

14 Października 2024
Ibiza Sound

Ibiza Sound MX801 Instrukcja

14 Października 2024
Pyle Pro

Pyle Pro PMXU83BT Instrukcja

12 Października 2024
Vonyx

Vonyx VMA106 Instrukcja

9 Października 2024
Røde

Røde RØDECaster Duo Instrukcja

8 Października 2024
Valcom

Valcom V-9985 Instrukcja

8 Października 2024
Valcom

Valcom V-9983 Instrukcja

8 Października 2024
Valcom

Valcom V-9984 Instrukcja

8 Października 2024
Glemm

Glemm MX 4816 Instrukcja

8 Października 2024