Instrukcja obsługi Danfoss TPOne-M Thermostaat

Danfoss Thermostaat TPOne-M Thermostaat

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Danfoss TPOne-M Thermostaat (28 stron) w kategorii Thermostaat. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/28
Danfoss Heating
TPOne-M
Electronic Programmable Room Thermostat
including Domestic Hot Water Timer
Installation Guide
2TPOne-M
Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other
printed material. All trademarks in this material are property of the respective companies.
Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
TPOne is an intelligent programmable heating control
made easy. TPOne includes features which are designed
to save energy. Look out for the leaf symbol throughout
this guide for settings which can directly inuence the
energy saved.
Danfoss Heating 3
Installation Instructions
ErP Class
The products represented within this document are classied according
to, and allow completion of, the Energy Related Product (ErP) Directive
System Package che and the ErP system data label. ErP Labelling
obligation is applicable from 26th September 2015.
ERP Class Product Function and ErP Description
Additional
efficiency
gain
IV
TPI Room Thermostat, for use with on/off
output heaters
An electronic room thermostat that controls
both thermostat cycle rate and in-cycle on/
o ratio of the heater proportional to room
temperature. TPI control strategy reduces
mean water temperature, improves room
temperature control accuracy and enhances
system eciency.
2%
ErP
4
Product
Class
Specications TPOne-M
Operating Voltage 230Vac, 50/60Hz
Output 1 (Heating) Volt Free
Setting temperature range 5-35°C
Operating temprature range 0-45°C
Switch rating 1 3A (1) at 230Vac
Switch type 1 1 x SPDT Type 1B
Output 2 (Domestic Hot Water) 230Vac
Switch rating 2 3A (1) at 230Vac
Switch type 2 1 x SPDT Type 1B
IP rating IP20
On/o control Yes
Chrono-proportional control Yes
Operating mode Heating
Construction EN 60730-2-9
Control pollution situation Degree 2
Rated impulse voltage 2.5kV
Ball pressure test 75°C
Dimensions (mm) H67 x W154 x D30
Software Classication A

Specyfikacje produktu

Marka: Danfoss
Kategoria: Thermostaat
Model: TPOne-M Thermostaat

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Danfoss TPOne-M Thermostaat, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Thermostaat Danfoss

Instrukcje Thermostaat

Najnowsze instrukcje dla Thermostaat

Remeha

Remeha iSense RF Instrukcja

7 Października 2024
Heatmiser

Heatmiser PRTHW-W Instrukcja

7 Października 2024
Heatmiser

Heatmiser DS1-E Instrukcja

7 Października 2024
Heatmiser

Heatmiser PRT-EW Instrukcja

7 Października 2024
Heatmiser

Heatmiser PRT-N Instrukcja

7 Października 2024
GENERAL Life

GENERAL Life FH10 Instrukcja

7 Października 2024
GENERAL Life

GENERAL Life HT220S Instrukcja

7 Października 2024
GENERAL Life

GENERAL Life FC100 Instrukcja

7 Października 2024
GENERAL Life

GENERAL Life HT270 Instrukcja

7 Października 2024
GENERAL Life

GENERAL Life HT300 Instrukcja

7 Października 2024