Instrukcja obsługi Danfoss TP5001Range gebruik

Danfoss termostat TP5001Range gebruik

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Danfoss TP5001Range gebruik (104 stron) w kategorii termostat. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/104
TP5001 Range
Electronic 5/2 day programmable room thermostat
Mains, Battery and RF versions
User Instructions
Bedienungsanleitung
Instrucciones del usuario
Brugervejledning
GB
D
ES
Instructies voor gebruik
Instructions d’utilisateur
Istruzioni per l’utente
DK
NL
F
I
2
An introduction to your programmable room thermostat
Your programmable room thermostat allows you to programme
di erent temperatures at di erent time periods. You can programme
one set of times and temperatures for week days with a di erent set of
temperatures for weekend days, this is referred to as 5/2 day operation.
The thermostat can also be set up by your installer to provide one set
of times and temperatures that are repeated each day of the week. This
is referred to as 24 hour operation.
The thermostat can also be set by you to provide two di erent
programming blocks which can then be assigned to any day of the
week, this is referred to as A/B programme operation.
All thermostats can be set by your installer to provide up 2, 4 or 6 time
and temperature settings each day.
All thermostats feature useful overrides, including a programmable
frost setting.
Your thermostat has some advanced features which the installer will
set-up if they are required. There are also a number of advanced features
which can be set up by you. These advanced settings alter the way that
your thermostat operates, some also a ect the programming functions
and the user overrides. Please read the User Advanced Programming
instructions before programming the unit (see page 10).
Preset programmes
Your TP5001 comes ready programmed with a set of operating times and
temperatures which suit most people. Please remember that some of the
options available will depend on how the installer has set up the unit.
User Instructions
User Instructions
GB
Weekdays (Mon-Fri) Weekend (Sat-Sun)
Event Time Temp. °C Event Time Temp. °C
1 06:30 20 1 07:30 20
2 08:30 15 2 09:30 20
3 11:30 20 3 11:30 20
4 13:30 15 4 13:30 20
5 16:30 21 5 16:30 21
6 22:30 15 6 22:30 15
Note: these are also times for Block
“A” programmes
Note: these are also times for Block “B”
programmes
3
Note: If set up for 4 events per day, events 3 & 4 are skipped. If set up
for 2 events per day, events 2, 3, 4 & 5 are skipped. In both cases the
events are re-numbered.
Before you start
Open the  ap on the front of the programmer and
press the RESET button with a non-metallic object
until the display goes blank. This will ensure that
the factory programmes are set and that the micro-
computer in the product is operating correctly.
Customising the display
For the sake of clarity, the instructions assume that the display setting
uses a 24 hour clock, °C and that days of the week are numbered 1-7,
(where 1 is Monday). All of these settings can be personalised after the
thermostat has been programmed, see pages 8 and 9.
Setting the correct date and time
Your TP5001 incorporates a real time clock with calendar function that
automatically changes time in both Spring and Autumn. The time and
date is set in the factory for the CET time zone, and does not normally
require adjustment. If you live in another time zone refer to “Time zone
o set” on page 11. However, should it be found necessary to adjust
time or date for any other reason refer to the following instructions.
User Instructions
GB
RESET
Setting the date
Press and hold Λ and PROG for 3 seconds, to
display date in dd/mm/yy format.

Specyfikacje produktu

Marka: Danfoss
Kategoria: termostat
Model: TP5001Range gebruik

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Danfoss TP5001Range gebruik, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje termostat Danfoss

Danfoss

Danfoss HC6000 Thermostaat Instrukcja

12 Stycznia 2025
Danfoss

Danfoss RA 2982 Instrukcja

6 Października 2024
Danfoss

Danfoss RET 230L Instrukcja

5 Października 2024
Danfoss

Danfoss TP5001Range gebruik Instrukcja

26 Września 2024
Danfoss

Danfoss RA 2000 series Instrukcja

24 Września 2024
Danfoss

Danfoss TP5E-RF Instrukcja

23 Września 2024
Danfoss

Danfoss TP5000 plus RF Instrukcja

21 Września 2024
Danfoss

Danfoss RET 230 HCW-3 installatie Instrukcja

17 Września 2024
Danfoss

Danfoss TP9000 Si Instrukcja

17 Września 2024
Danfoss

Danfoss TP5000 Si Instrukcja

17 Września 2024

Instrukcje termostat

Najnowsze instrukcje dla termostat

Honeywell

Honeywell off Instrukcja

15 Stycznia 2025
Vaillant

Vaillant calorMatic VRT 370 Instrukcja

15 Stycznia 2025
AWB

AWB ExaControl Select SRT 50/2 Instrukcja

15 Stycznia 2025
Salus

Salus RT310SR Instrukcja

15 Stycznia 2025
Honeywell

Honeywell Round Wireless Modulation - Y87RF1004 Instrukcja

15 Stycznia 2025
Bosch

Bosch DT20RF DIGISTAT Instrukcja

14 Stycznia 2025
Drayton

Drayton MiStat C - C110C Instrukcja

13 Stycznia 2025
Drayton

Drayton DIGISTAT plus RF Instrukcja

13 Stycznia 2025
Drayton

Drayton MiTime T710R Instrukcja

13 Stycznia 2025
Drayton

Drayton MiTime T720R Instrukcja

13 Stycznia 2025