Instrukcja obsługi Danfoss SonoMeter 40

Danfoss Sprzęt pomiarowy SonoMeter 40

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Danfoss SonoMeter 40 (12 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
© Danfoss | 2021.10 AQ39012919462001en-010101 | 1
SonoMeter 40
Wired M-Bus protocol description
Operating guide
Table of Contents 1. General structure of protocol 2 ................................................................................................
1.1. General features of protocol 2 ........................................................................................................................
1.2. Data strings 2 ........................................................................................................................................................
2. Selection of the data type 3 ......................................................................................................
2.1. Selection of the data type “All data” 3 .........................................................................................................
2.2. Selection of the data type “User data” 3 .....................................................................................................
2.3. Selection of the data type “Simple billing” (Years logger) 3 ...............................................................
2.4. Selection of the data type “Enhanced billing” (Days logger) 3 ..........................................................
2.5. Selection of the data type “Multi tariff billing” (Months logger) 3 ...................................................
2.6. Selection of the data type “Instantaneous values” 3 .............................................................................
2.7. Selection of the data type “Load management values for management” (Hours logger) 3 ..
2.8. Selection of the data type “Installation and startup” 3 .........................................................................
2.9. Selection of the data type “Testing” 4 .........................................................................................................
2.10. Parameter list for preselecting 4 ....................................................................................................................
3. Data request ............................................................................................................................ 4
3.1. Data request 4 ..............................................................................................................................................................
3.2. Meter data coding 5 ..................................................................................................................................................
3.3. CRC16 checksum calculation algorithm ......................................................................................................... 10
4. Settings the parameters of meter ........................................................................................ 11
4.1. Changing the identification number ............................................................................................................... 11
4.2. Changing the identification number, Manufacturer ID and Medium ................................................. 11
4.3. Changing the primary address .......................................................................................................................... 11
4.4. Changing the data and time of the meter ..................................................................................................... 11
4.5. Changing the yearly set day ............................................................................................................................... 11
4.6. Changing the monthly set day .......................................................................................................................... 11
4.7. Changing the baud rate ........................................................................................................................................ 11
5. Secondary addressing ............................................................................................................ 12
5.1. Selecting of the meter ................................................................................................................................... 12
5.2. Communication with selected meter ...................................................................................................... 12
5.3. Deselection of secondary addressing mode ......................................................................................... 12
2 | AQ39012919462001en-010101 © Danfoss | 2021.10
Operating guide SonoMeter 40 - Wired M-Bus protocol description
1. General structure of
protocol
1.1. General features of
protocol
Meter uses a M-bus protocol .
Default baud rate: 2400 bps, Even, 1 Stop.
Baud rate can be changed.
Protocol is the same for Mbus interface and for optical interface.
Primary address of Mbus is individual for Mbus interface and for optical interface.
1.2. Data strings Data string to meter SND_NKE:
1 2 3 4 5
10h 40h A CS 16h
A - M-bus primary address of meter
CS – control sum (the youngest byte of amount of 2-nd and 3-rd bytes)
Data string to meter SND_UD2
1 2 3 4 5 6 7 8...n-2 n-1 n
68h 68hL L 53h
73h A 51h Data
bytes CS 16h
L - length of string (the number of bytes from 5-th to n-2 byte)
A - M-bus primary address of meter
CS – control sum (the youngest byte of amount of 5-th to n-2 bytes)
Data string to meter REQ_UD2:
1 2 3 4 5
10h 5Bh
7Bh A CS 16h
A - M-bus primary address of meter
CS - control sum (the youngest byte of amount of 2-nd and 3-rd bytes)
Answer of the meter CON:
E5h
Answer of the meter RSP_UD2:
1 2 3 4 5 6 7 8...11 12, 13 14 15 16 17 18,19
68h 68hL L C A CI ID Man Vrs Md TC St Sign
20 ... ... ... ... ... ... n-2 n-1 n
DIF VIF Data DIF VIF Data CS 16h
L - length of string (the number of bytes from 5-th to n-2 byte)
C – „C field“ (08)
A - M-bus primary address of meter
CI - „CI field“
ID – identification number of meter (BSD8, used for secondary addressing, can be changed - see
paragraph 4.1),
Man – Manufacturer code (Danfoss A/S manufacturer code is „DFS“, 10 D3)
Vrs – number of protocol version (0Bh)
Md – code of medium (for „heat / cold energy“: 0Dh)
TC – counter of telegrams
St - meter status code
Sign - 00 00
The bytes 20...n-2 is data from meter:
DIF – code of data format
VIF – code of data units
Data– values of data
CS – control sum (the youngest byte of amount of 5-th to n-2 bytes).
AQ39012919462001en-010101 | 3© Danfoss | 2021.10
Operating guide SonoMeter 40 - Wired M-Bus protocol description
2. Selection of the data
type
2.1. Selection of the data
type “All data”
Master sends to the meter telegram SND_UD2:
68h 68h03h 03h 53h
73h A 50h CS 16h
or
68h 04h 04h 68h 53h
73h A 50h 00h CS 16h
Answer of the meter CON (if A not equal FFh):
E5h
2.2. Selection of the data
type “User data”
Master sends to the meter telegram SND_UD2:
68h 04h 04h 68h 53h
73h A 50h 10h CS 16h
Answer of the meter CON (if A not equal FFh):
E5h
2.3. Selection of the data
type “Simple billing”
(Years logger)
Master sends to the meter telegram SND_UD2:
68h 04h 04h 68h 53h
73h A 50h 20h CS 16h
Answer of the meter CON (if A not equal FFh):
E5h
2.4. Selection of the data
type “Enhanced
billing” (Days logger)
Master sends to the meter telegram SND_UD2:
68h 04h 04h 68h 53h
73h A 50h 30h CS 16h
Answer of the meter CON (if A not equal FFh):
E5h
2.5. Selection of the data
type “Multi tariff
billing” (Months
logger)
Master sends to the meter telegram SND_UD2:
68h 04h 04h 68h 53h
73h A 50h 40h CS 16h
Answer of the meter CON (if A not equal FFh):
E5h
2.6. Selection of the data
type “Instantaneous
values”
Master sends to the meter telegram SND_UD2:
68h 04h 04h 68h 53h
73h A 50h 50h CS 16h
Answer of the meter CON (if A not equal FFh):
E5h
2.7. Selection of the
data type “Load
management values
for management”
(Hours logger)
Master sends to the meter telegram SND_UD2:
68h 04h 04h 68h 53h
73h A 50h 60h CS 16h
Answer of the meter CON (if A not equal FFh):
E5h
2.8. Selection of the data
type “Installation and
startup”
Master sends to the meter telegram SND_UD2:
68h 04h 04h 68h 53h
73h A 50h 80h CS 16h
Answer of the meter CON (if A not equal FFh):
E5h

Specyfikacje produktu

Marka: Danfoss
Kategoria: Sprzęt pomiarowy
Model: SonoMeter 40

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Danfoss SonoMeter 40, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt pomiarowy Danfoss

Danfoss

Danfoss SonoSelect 10 Instrukcja

20 Września 2024
Danfoss

Danfoss SonoMeter 40 Instrukcja

7 Września 2024
Danfoss

Danfoss Infocal 9 Instrukcja

5 Września 2024
Danfoss

Danfoss SonoCollect 112 Instrukcja

2 Września 2024
Danfoss

Danfoss SonoSensor 30 Instrukcja

1 Września 2024
Danfoss

Danfoss SonoRead 868 Instrukcja

28 Sierpnia 2024

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

PCE Instruments

PCE Instruments PCE-PMI 1 Instrukcja

14 Stycznia 2025
PCE Instruments

PCE Instruments PCE-324 Instrukcja

14 Stycznia 2025
PCE Instruments

PCE Instruments PCE-TC 32N Instrukcja

14 Stycznia 2025
PCE Instruments

PCE Instruments PCE-ACO 9500 Instrukcja

14 Stycznia 2025
Klein Tools

Klein Tools CL810 Instrukcja

14 Stycznia 2025
Klein Tools

Klein Tools CL710 Instrukcja

14 Stycznia 2025
Ebro

Ebro PHT 830 Instrukcja

13 Stycznia 2025
Kern

Kern FL 1KG Instrukcja

10 Stycznia 2025
PeakTech

PeakTech 6193 Instrukcja

10 Stycznia 2025
PCE Instruments

PCE Instruments PCE-313A Instrukcja

10 Stycznia 2025