Instrukcja obsługi Dali Helicon IW 200 Phantom

Dali Głośniki Helicon IW 200 Phantom

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dali Helicon IW 200 Phantom (7 stron) w kategorii Głośniki. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7

Thank you for choosing DALI In-Wall loudspeakers!

DALI is acclaimed around the world for unique loudspeakers designed and

built to our uncompromising standards for design and performance.

DALI’s main area of expertise is the development and reﬁnement of known

and new techniques in the ﬁelds of audio and acoustics.

The goal for every single DALI loudspeaker is to create a listening experience

in your home that will make you forget time and place.

It is essential that your DALI In-Wall loudspeakers are correctly installed and

connected. This owner’s manual contains our guidelines for installation, con-

nection and maintenance.

NOTE: The sections on installing and painting the loudspeaker is for the use

of professional installers. If you have any questions, please feel free to con-

tact your authorised DALI dealer.

Enjoy!

Safety Guidelines

• Always follow all safety guidelines

• DALI Helicon IW 200 Phantom is intended for home use only. It is not

intended for use in professional environments such as alarmsystems,

public address, etc.

• The speaker must only be used indoors and never in wet areas or at

extreme hot or cold temperatures

• DALI Helicon IW 200 Phantom must not be exposed to direct sunlight

• DALI Helicon IW 200 Phantom must be installed with a secure drop wire

support line

• Power off the ampliﬁer when connecting the speaker cables

Parts List

The following parts are enclosed:

• 1 Helicon IW 200 Phantom

• 1 3 mm Allen wrench

• 1 mounting template

• 1 protective template for painting

• 1 owner’s manual

• 1 white logo badge

About In-Wall Loudspeakers

DALI Helicon IW 200 Phantom provides the

unique, acclaimed sound of a true DALI Heli-

con loudspeaker for easy and discreet integra-

tion into your home.

DALI Helicon IW 200 Phantom is equally

suited for stereo and surround systems where

sublime sound quality is a high priority.

DALI recommends the use of a subwoofer such

as DALI Helicon S600 in conjunction with Heli-

con IW 200 Phantom. This will permit the repro-

duction of the lowest frequencies for an overall

enhancement of your sound system.

Your choice of cables is a crucial element in

your installation. Be aware that replacing

cables after installation is a difﬁcult task. There-

fore, select quality cables such as DALI Silver

Wave Two.

Mounting Template

The enclosed template can be used to initially visualise how your speakers should

be mounted. Then, tape the template perfectly level at the selected mounting

position, so that you can mark the necessary opening.

Helicon IW 200 Phantom

DALI Helicon IW 200 Phantom incorporates dog-

leg brackets for wall or ceiling mounting. The

brackets attach the loudspeaker ﬁrmly to the

rear of the surface on which it is mounted. They

extend out at a 90 degree angle when the screws

are tightened. The screws should be tightened

so that the loudspeaker sits securely in place

- but be careful not to tighten them too much.

If you need to remove the loudspeaker, loosen

the screws approximately 5 to 10 turns counter-

clockwise and the brackets will loosen their grip.

Do not unscrew more than 5 to 10 turns or the

bracket may fall off the screws.

DALI Helicon IW 200 Phantom must be ﬁtted

with a drop wire to prevent the speaker from fall-

ing in the event of ﬁre, earthquake, etc. To pre-

vent injury or damage from a fall, ﬁt a steel wire

or other non-ﬂammable connection between a

solid support in the house (ceiling beam, wall

stud, etc.) and the eyehook on the Helicon IW

200 Phantom as shown.

Connect cables so that the loudspeaker is in cor-

rect phase. The red (+) loudspeaker terminal must

be connected to the red (+) ampliﬁer terminal. The

black (-) loudspeaker terminal must be connected

to the black (-) ampliﬁer terminal.

Remove insulation so that approx. ½” of bare

wire is exposed. Press the top of the terminal

down and insert the bare wire into the open-

ing. When the wire is fully in place with no loose

strands exposed, release the terminal. The cable

is now connected.

-!8#-v$2/0

34%%,7)2%

#%,,).'7!,,

Skabelonen skal være 100% vandret før skæring

NORMAL

LOW FREQ LEVEL

ENHANCED

Specyfikacje produktu

Marka:	Dali
Kategoria:	Głośniki
Model:	Helicon IW 200 Phantom

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dali Helicon IW 200 Phantom, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Głośniki Dali

Dali Zensor 1 Instrukcja

13 Stycznia 2025

Dali Zensor 3 Instrukcja

7 Października 2024

Dali Concept Instrukcja

5 Października 2024

Dali Menuet Instrukcja

5 Października 2024

Dali Evidence Instrukcja

23 Września 2024

Dali LEKTOR Instrukcja

22 Września 2024

Dali PHANTOM H Series Instrukcja

20 Września 2024

Dali PIANO Instrukcja

20 Września 2024

Dali MENTOR Instrukcja

15 Września 2024

Dali Fazon LCR Instrukcja

10 Września 2024

Instrukcje Głośniki

Najnowsze instrukcje dla Głośniki

IWantit iPBTS14 Instrukcja

15 Stycznia 2025

Pure Acoustics DREAM TOWER-101 Instrukcja

15 Stycznia 2025

Pure Acoustics DREAM TOWER-100 Instrukcja

15 Stycznia 2025

Pure Acoustics RB 6 Instrukcja

15 Stycznia 2025

Salora BTS1000 Instrukcja

15 Stycznia 2025

Krüger&Matz KM0539 Instrukcja

14 Stycznia 2025

Bolse C1 Instrukcja

14 Stycznia 2025

Exagerate XBTPET-CAT Instrukcja

14 Stycznia 2025

Exagerate XBTPET-DOG Instrukcja

14 Stycznia 2025

Wharfedale Diamond 102C Instrukcja

13 Stycznia 2025