Instrukcja obsługi Dahua Technology DHI-IVSS7008-1T

Dahua Technology magnetowid DHI-IVSS7008-1T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dahua Technology DHI-IVSS7008-1T (42 stron) w kategorii magnetowid. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/42
Intelligent Video Surveillance Server
Quick Start Guide
Version 1.0.1
II
Welcome
Thank you for purchasing our intelligent video surveillance server (IVSS)!
This quick start guide will help you become familiar with our device in a very short time.
Before installation and operation, please read the following safeguard and warning carefully!
Important Safeguard and Warning
The following description is the correct application method of the device. Please read the
manual carefully before use, in order to prevent danger and property loss. Strictly conform
to the manual during application and keep it properly after reading.
Operating Requirements
Do not place and install the device in an area exposed to direct sunlight or near
heat generating device.
Do not install the device in a humid, dusty or fuliginous area.
Please keep its horizontal installation, or install it at stable places, and prevent it
from falling.
Do not drip or splash liquids onto the device; do not put on the device anything
lled with liquids, in order to prevent liquids from owing into the device.
Please install the device at well-ventilated places; do not block its ventilation
opening.
Use the device only within rated input and output range.
Do not dismantle the device arbitrarily.
Please transport, use and store the device within allowed humidity and
temperature range.
Power Requirement
Please make sure to use batteries according to requirements; otherwise, it may
result in re, explosion or burning risks of batteries!
To replace batteries, only the same type of batteries can be used!
The product shall use electric cables (power cables) recommended by this area,
which shall be used within its rated specication!
Please make sure to use standard power adapter supplied with the device, or
the user shall undertake resulting personal injuries or device damages.
Please use power supply that meets SELV (safety extra low voltage)
requirements, and supply power with rated voltage that conforms to Limited
Power Source in IEC60950-1. For specic power supply requirements, please
refer to device labels.
Products with category I structure shall be connected to grid power output
socket, which is equipped with protective grounding.
Appliance coupler is a disconnecting device. During normal use, please keep
an angle that facilitates operation.
III
Caution
DO NOT CHANGE OR REPLACE THE AI MODULE WHEN DEVICE IS
RUNNING. Shut down the device rst and then remove the AI module,
otherwise, the data on the AI module may result in damage.


Specyfikacje produktu

Marka: Dahua Technology
Kategoria: magnetowid
Model: DHI-IVSS7008-1T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dahua Technology DHI-IVSS7008-1T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje magnetowid Dahua Technology

Instrukcje magnetowid

Najnowsze instrukcje dla magnetowid

Hikvision

Hikvision DS-7104NI-Q1 Instrukcja

15 Października 2024
Hitachi

Hitachi VT-F494A Instrukcja

10 Października 2024
DataVideo

DataVideo HDR-2 Instrukcja

9 Października 2024
Reolink

Reolink NVS8 Instrukcja

7 Października 2024
Synology

Synology DVA1622 Instrukcja

7 Października 2024
Motorola

Motorola MTN162K0021 Instrukcja

7 Października 2024
Sony

Sony SNT-EX101E Instrukcja

4 Października 2024
Sony

Sony SNT-EX104 Instrukcja

4 Października 2024