Instrukcja obsługi Dahua Technology ASI7223X-A-T1

Dahua Technology System kontroli dostępu ASI7223X-A-T1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dahua Technology ASI7223X-A-T1 (76 stron) w kategorii System kontroli dostępu. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/76

Face Recognition Terminal

User’s Manual

V1.0.1

Foreword

General

This manual introduces the installation and basic operation of the Face Recognition Terminal

(hereinafter referred to as "terminal" ).

Safety Instructions

The following categorized signal words with dened meaning might appear in the manual.

Signal Words

Meaning

NOTE

Provides additional information as the emphasis and supplement to the text.

Revision History

Version

Revision Content

Release Date

V1.0.1

Add terminal of model Y.

July 2020

V1.0.0

First Release.

May 2020

About the Manual

 The manual is for reference only. If there is inconsistency between the manual and the

actual product, the actual product shall prevail.

 We are not liable for any loss caused by the operations that do not comply with the manual.

 The manual would be updated according to the latest laws and regulations of related

regions. For detailed information, see the paper manual, CD-ROM, QR code or our ocial

website. If there is inconsistency between paper manual and the electronic version, the

electronic version shall prevail.

 All the designs and software are subject to change without prior written notice. The product

updates might cause some differences between the actual product and the manual. Please

contact the customer service for the latest program and supplementary documentation.

 There still might be deviation in technical data, functions and operations description, or

errors in print. If there is any doubt or dispute, please refer to our nal explanation.

 Upgrade the reader software or try other mainstream reader software if the manual (in PDF

format) cannot be opened.

 All trademarks, registered trademarks and the company names in the manual are the

properties of their respective owners.

 Please visit our website, contact the supplier or customer service if there is any problem

occurred when using the device.

 If there is any uncertainty or controversy, please refer to our nal explanation.

Important Safeguards and Warnings

This chapter describes the contents covering proper handling of the terminal, hazard

prevention, and prevention of property damage. Read these contents carefully before using the

terminal, comply with them when using, and keep them well for future reference.

Operation Requirement

 Do not place or install the terminal in a place exposed to sunlight or near the heat source.

 Keep the terminal away from dampness, dust or soot.

 Keep the terminal installed horizontally on the stable place to prevent it from falling.

 Do not drop or splash liquid onto the terminal, and make sure there is no object lled with

liquid on the terminal to prevent liquid from flowing into the terminal.

 Install the terminal in a well-ventilated place, and do not block the ventilation of the

terminal.

 Operate the terminal within the rated range of power input and output.

 Do not dissemble the terminal.

 Transport, use and store the terminal under the allowed humidity and temperature

conditions.

 For the terminal with a temperature monitoring unit:

Install the temperature monitoring unit in a windless indoor environment, and maintain 

the indoor ambient temperature at to . 15°C 32°C

Warm up the temperature monitoring unit for more than 20 minutes after power-on to 

enable the temperature monitoring unit to reach thermal equilibrium.

Electrical Safety

 Improper battery use might result in re, explosion, or inammation.

 When replacing battery, make sure the same model is used.

 Use the recommended power cables in the region and conform to the rated power

specication.

 Use the power adapter provided with the terminal; otherwise, it might result in people injury

and device damage.

 The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)

standard, and supply power with rated voltage which conforms to Limited power Source

requirement according to IEC60950-1. Please note that the power supply requirement is

subject to the device label.

 Connect the device (I-type structure) to the power socket with protective earthing.

 The appliance coupler is a disconnection device. When using the coupler, keep the angle

for easy operation.

Specyfikacje produktu

Marka:	Dahua Technology
Kategoria:	System kontroli dostępu
Model:	ASI7223X-A-T1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dahua Technology ASI7223X-A-T1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje System kontroli dostępu Dahua Technology

Dahua Technology ASI1212A(V2) Instrukcja

8 Października 2024

Dahua Technology ASI7214X Instrukcja

16 Września 2024

Dahua Technology ASI1212A-D(V2) Instrukcja

16 Września 2024

Dahua Technology ASI8213Y-V3 Instrukcja

15 Września 2024

Dahua Technology ASC2104B-T Instrukcja

14 Września 2024

Dahua Technology ASC2202C-S Instrukcja

11 Września 2024

Dahua Technology ASR2101H-D Instrukcja

10 Września 2024

Dahua Technology ASI7223X-A-V1-T1 Instrukcja

4 Września 2024

Dahua Technology ASI7213Y-V3 Instrukcja

30 Sierpnia 2024

Dahua Technology ASR1101A-D Instrukcja

30 Sierpnia 2024

Instrukcje System kontroli dostępu

Najnowsze instrukcje dla System kontroli dostępu

Panduit ACF05 Instrukcja

9 Października 2024

Viking K-1200 Instrukcja

9 Października 2024

Viking K-1275-IP-EWP Instrukcja

9 Października 2024

Viking K-1770-IP Instrukcja

9 Października 2024

Viking K-1270-EWP Instrukcja

9 Października 2024

Viking K-1770-3-EWP Instrukcja

9 Października 2024

Viking K-1200-IP Instrukcja

9 Października 2024

Viking K-1705-IP-EWP Instrukcja

9 Października 2024

Viking K-1770-3 Instrukcja

9 Października 2024

Viking K-1275-IP Instrukcja

9 Października 2024