Instrukcja obsługi Dahua Technology ASI7213X-T1


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dahua Technology ASI7213X-T1 (80 stron) w kategorii System kontroli dostępu. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/80
Face Recognition Access Controller
User’s Manual
V1.0.1
I
Foreword
General
This manual introduces the installation and basic operations of the Face Recognition Access
Controller (hereinafter referred to as "access controller").
Safety Instructions
The following categorized signal words with dened meaning might appear in the manual.
Signal Words
Meaning
NOTE
Provides additional information as the emphasis and supplement to the
text.
Revision History
Version
Revision Content
V1.0.1
Add access controller of model Y.
V1.0.0
First Release.
About the Manual
The manual is for reference only. If there is inconsistency between the manual and the
actual product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply with the manual.
The manual would be updated according to the latest laws and regulations of related
regions. For detailed information, see the paper manual, CD-ROM, QR code or our ocial
website. If there is inconsistency between paper manual and the electronic version, the
electronic version shall prevail.
All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the manual. Please
contact the customer service for the latest program and supplementary documentation.
There still might be deviation in technical data, functions and operations description, or
errors in print. If there is any doubt or dispute, please refer to our nal explanation.
Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
All trademarks, registered trademarks and the company names in the manual are the
properties of their respective owners.
Please visit our website, contact the supplier or customer service if there is any problem
occurred when using the device.
If there is any uncertainty or controversy, please refer to our nal explanation.
II
Important Safeguards and Warnings
This chapter describes the contents covering proper handling of the access controller, hazard
prevention, and prevention of property damage. Read these contents carefully before using the
access controller, comply with them when using, and keep them well for future reference.
Operation Requirement
Do not place or install the access controller in a place exposed to sunlight or near the heat
source.
Keep the access controller away from dampness, dust or soot.
Keep the access controller installed horizontally on the stable place to prevent it from
falling.
Do not drop or splash liquid onto the access controller, and make sure there is no object
lled with liquid on the access controller to prevent liquid from owing into the access
controller.
Install the access controller in a well-ventilated place, and do not block the ventilation of
the access controller.
Operate the access controller within the rated range of power input and output.
Do not dissemble the access controller randomly.
Transport, use and store the access controller under the allowed humidity and temperature
conditions.
For the access controller with a temperature monitoring unit:
Install the temperature monitoring unit in a windless indoor environment, and maintain
the indoor ambient temperature at to . 15°C 32°C
Warm up the temperature monitoring unit for more than 20 minutes after power-on to
enable the temperature monitoring unit to reach thermal equilibrium.
Electrical Safety
Improper battery use might result in re, explosion, or inammation.
When replacing battery, make sure the same model is used.
Use the recommended power cables in the region and conform to the rated power
specication.
Use the power adapter provided with the access controller; otherwise, it might result in
people injury and device damage.
The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)
standard, and supply power with rated voltage which conforms to Limited power Source
requirement according to IEC60950-1. Please note that the power supply requirement is
subject to the device label.
Connect the device (I-type structure) to the power socket with protective earthing.
The appliance coupler is a disconnection device. When using the coupler, keep the angle
for easy operation.


Specyfikacje produktu

Marka: Dahua Technology
Kategoria: System kontroli dostępu
Model: ASI7213X-T1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dahua Technology ASI7213X-T1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje System kontroli dostępu Dahua Technology

Instrukcje System kontroli dostępu

Najnowsze instrukcje dla System kontroli dostępu

Panduit

Panduit ACF05 Instrukcja

9 Października 2024
Viking

Viking K-1200 Instrukcja

9 Października 2024
Viking

Viking K-1275-IP-EWP Instrukcja

9 Października 2024
Viking

Viking K-1770-IP Instrukcja

9 Października 2024
Viking

Viking K-1270-EWP Instrukcja

9 Października 2024
Viking

Viking K-1770-3-EWP Instrukcja

9 Października 2024
Viking

Viking K-1200-IP Instrukcja

9 Października 2024
Viking

Viking K-1705-IP-EWP Instrukcja

9 Października 2024
Viking

Viking K-1770-3 Instrukcja

9 Października 2024
Viking

Viking K-1275-IP Instrukcja

9 Października 2024