Instrukcja obsługi Da-Lite UTB Contour

Da-Lite monitor UTB Contour

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Da-Lite UTB Contour (8 stron) w kategorii monitor. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
INSTRUCTION BOOK FOR
UTB Contour
2
Tools Required for InstallationIncluded Hardware
Large Wall Bracket (47”)
(1) Screens under 104" in viewing width
(2) Screens 104" and over in viewing width
Phillips Screwdriver
Tape Measure
Pencil
Small Bottom Wall bracket (8)
(1) Screens under 104" in viewing width
Large Bottom Wall bracket (44”)
(1) Screens 104" and over in viewing width
Frame Brackets
(1) Screens under 104" in viewing width
(2) Screens 104" and over in viewing width
#10
X ⅜"
Silver Screws (12) 8-32
X ⅜"
Machine Screws (4)
#10
X ⅜"
Pointed
Black Screws (Varies)
8–32 X " Fillister Screw½
(1) Screens under 104" in viewing width
(2) Screens 104" and over in viewing width
3
1. Create a clean work area for assembly using a soft clean material.
This will protect the inner frame and ensure a clean projection
surface.
2. Unwrap frame pieces. Assemble inner frame pieces on the work
area.
3. Slide inner frame pieces together at corners. Secure inner frame
pieces with (12) #10 x
" silver screws (Figure 1).
4. Set the assembled inner frame aside. Unroll screen surface and
place it viewing side down on the clean work area.
5. Place inner frame on screen surface, screw side up.
Inner Frame & Viewing Surface Assembly
Figure 1
(12) #10 x ⅜" Screws.
Silver, Flat Tip
6. Wrap fabric around inner frame and hook grommets over the
corner pins (Figure 2).
7. Hook the rest of the grommets over the lat head screws on all
sides (Figure 2). Please be sure the grommets clear the head of
each screw.
Note: Your screen was assembled and aligned prior to shipment.
If any realignment is necessary, the positioning of the lat head
screws can be adjusted. Using a Phillips screwdriver, rotate the
lat head screw one turn counterclockwise. Reposition screw as
needed. Secure the screw in place by slowly rotating it clockwise.
Grommets
Corner
Pin
Flat Head
Screw
Figure 2
Grommet is under
the Flat Head Screw


Specyfikacje produktu

Marka: Da-Lite
Kategoria: monitor
Model: UTB Contour

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Da-Lite UTB Contour, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor Da-Lite

Instrukcje monitor

Najnowsze instrukcje dla monitor

Acer

Acer VG281K Instrukcja

15 Stycznia 2025
Acer

Acer V223W Instrukcja

15 Stycznia 2025
Orion

Orion R4N55RNF Instrukcja

15 Stycznia 2025
Orion

Orion 23REDPH Instrukcja

15 Stycznia 2025
Orion

Orion R4N46UNF Instrukcja

15 Stycznia 2025
Orion

Orion 21REDPH Instrukcja

15 Stycznia 2025
BenQ

BenQ G2750HM Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM27JF-VDR Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM24JF-VDR Instrukcja

14 Stycznia 2025