Instrukcja obsługi D-Link DXS-3400

D-Link przełącznik DXS-3400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla D-Link DXS-3400 (6 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
Top-of-Rack 10 Gigabit Stackable Managed Switches
DXS-3400 Series
D-Link’s DXS-3400 Series Top-of-Rack 10 Gigabit Stackable Managed Switches are new,
compact, high-performance switches that feature wire-speed 10-Gigabit Ethernet switching,
routing, and ultra-low latency. The 1U height and high port density make the DXS-3400 Series
suitable for enterprise and campus environments where space is at a premium. The
DXS-3400 Series switches also include 20 10GBASE-T or 10G SFP+ ports and 4 10GBASE-T/SFP+
combo ports, making them suitable for datacenter, core, and distribution applications.
High Availability and Flexibility
The DXS-3400 Series switches feature a modular fan and power supply design for a high
availability architecture. The hot-swappable design means that fans and power supplies can
be replaced without aecting switch operation. Physical and virtual switch stacking allow
the switches to be managed from a single IP address and provide redundancy for connected
devices. The Switch Resource Management (SRM) feature allows the hardware table size to
be changed, so that switch functions can be optimized based on the use of the switch. The
DXS-3400 Series switches come with 3 modes: IP Mode, LAN Mode, and L2 VPN Mode, which
modify the size of the Layer 2 and 3 tables for optimum eciency.
Feature Rich Software
The DXS-3400 Series switches include feature rich software which satises the needs of Small
Medium Business, Small Medium Enterprise, and campus users. It supports a wide range of
Layer 2 and 3 functions such as VLANs, inter-VLAN routing, multicasting, Quality of Service
(QoS), Virtual Router Redundancy Protocol (VRRP), Routing Information Protocol (RIP) v1/2,
Next Generation RIP (RIPng), Policy-Based Routing (PBR), and security features. The DXS-3400
Series also includes an easy-to-use web interface and an industry standard CLI for improved
management.
Features
High Availability and Flexibility
• Two AC hot-swappable power modules for 1+1
redundancy and load sharing
• Three hot-swappable fan trays provide N+1
cooling redundancy
• Physical stacking via four 10G ports, can stack up
to 4 devices
• Ethernet Ring Protection Switching (ERPS)
• Switch Resource Management (SRM) for exible
management of system resources
Lossless Ethernet via Data Center Bridging (DCB)
• IEEE 802.1Qbb Priority-based Flow Control (PFC)
• IEEE 802.1Qaz Enhanced Transmission Selection
(ETS)
• IEEE 802.1Qau Congestion Notication (CN)
Trac Monitoring & Bandwidth Control
• Port mirroring/Bandwidth Control
• Broadcast/Multicast/Unicast storm control
• Single Rate Three Color Marker (srTCM)
• Two Rate Three Color Marker (trTCM)
Easy Management
• RJ-45/Mini-USB console port
• Management and alarm ports
• USB port for rmware and conguration les
• Easy-to-use Web GUI
• Industry-standard CLI
High Availability
Redundancy features, such as hot-swappable power
supplies, redundant fan trays, and switch stacking
maximise the availability of your network
Lossless Ethernet
Data Center functionality available through Data
Center Bridging (DCB) enhances network
performance and reliability
Easy Management
Industry-standard management tools allow the
switch to be easily administered, integrating
seamlessly with existing devices
Highlights
DXS-3400 Series
Top-of-Rack 10 Gigabit Stackable Managed Switches
Technical Specications
General DXS-3400-24TC DXS-3400-24SC
Interfaces • 20 10GBASE-T ports
• 4 10GBASE-T/SFP+ combo ports
• 20 10G SFP+ ports
• 4 10GBASE-T/SFP+ combo ports
Console Port • RJ-45 and Mini USB console ports for out-of-band CLI management
Management Port • 10/100/1000BASE-T RJ-45 Ethernet for out-of-band IP management
USB Port • 1 port
Performance
Switching Capacity 480 Gbps•
Max. Forwarding Rate 357.12 Mpps•
Packet Buffer Memory 4 MB•
MAC Address Table • Up to 48K entries
Physical
Power Input 100 to 240 V, 50/60 Hz, 2 A•
Maximum Power
Consumption
• • 159.8 W 118.6 W
Standby Power
Consumption
• • 85.1 W 64.8 W
Heat Dissipation (Max.) 557.94 BTU/hr 388.39 BTU/hr• •
Dimensions (W x D x H) • 441 x 44 x 380 mm (17.32 x 1.73 x 14.96 inches)
Weight • 7.6 kg (16.76 lbs) (2 PSUs, 3 fan modules)
• 6.65 kg (14.66 lbs) (1 PSU, 3 fan modules)
• 5.25 kg (11.57 lbs) (no PSU or fan modules)
• 7.45 kg (16.42 lbs) (2 PSUs, 3 fan modules)
• 6.5 kg (14.33 lbs) (1 PSU, 3 fan modules)
• 5.1 kg (11.24 lbs) (no PSU or fan modules)
Operating Temperature • -5 to 50 °C (32 to 113 °F)
Storage Temperature • -40 to 70 °C (-40 to 158 °F)
Operating Humidity 0% to 95% RH•
Storage Humidity 0% to 95% RH•
Certications
Safety • cUL, CB, CE, CCC, BSMI
EMI/EMC • CE, FCC, C-Tick, VCCI, BSMI, CCC
Lossless Ethernet
Data Center Bridging (DCB) is an essential set of enhancements to Ethernet
for networking in data center environments. The DXS-3400 Series switches
support several core components of Data Center Bridging (DCB) such as IEEE
802.1Qbb, IEEE 802.1Qaz, and IEEE 802.1Qau. IEEE 802.1Qbb (Priority-based
Flow Control) provides ow control on specic priority to ensure there is no
data-loss during network congestion. IEEE 802.1Qaz (Enhanced Transmission
Selection) manages the allocation of bandwidth amongst dierent trac
classes. IEEE 802.1Qau (Congestion Notication) provides congestion
management for data ows within network domains to avoid congestion.
Energy Ecient
The DXS-3400 Series switches feature front-to-back airow which facilitates
the building of energy-ecient data centers. The front-to-back airow
optimizes air circulation inside the rack, allowing hot and cold isles in data
centers, increasing energy eciency in comparison to a mix of front-to-
back and side-to-side airow. The switches also feature in-built smart fans;
internal heat sensors monitor and detect temperature changes, and react
accordingly by utilizing dierent fan speeds for dierent temperatures.
At lower temperatures, the fans will run more slowly, reducing the switch’s
power consumption and noise.
DXS-3400 Series
Top-of-Rack 10 Gigabit Stackable Managed Switches
Standard Image Software Features
Stackability • Physical Stacking
• Up to 80G stacking bandwidth
• Up to 4 switches in a stack
• Ring/chain topology support
• Virtual stacking/clustering of up to 32 units
• Supports D-Link Single IP Management
L2 Features • MAC Address Table
• Up to 48K entries
• Flow Control
• 802.3x Flow Control when using full-duplex
• Back Pressure when using half-duplex
• HOL Blocking Prevention
• Spanning Tree Protocol
• 802.1D STP
• 802.1w RSTP
• 802.1s MSTP
• Root Guard
• Loop Guard
• Jumbo Frame
• Up to 12 Kb
• 802.1AX Link Aggregation
• Max. 32 groups per device, 8 ports per group
• ERPS (Ethernet Ring Protection Switching)
• Port mirroring
• Supports one-to-one, many-to-one
• Supports mirroring for Tx/Rx/both
• Supports 4 mirroring groups
• Flow mirroring
• Supports mirroring for Rx
• VLAN mirroring
• L2 protocol tunneling
• Loopback Detection (LBD)
• iSCSI awareness
• Multi-Chassis Link Aggregation (MLAG)
L2 Multicast Features MLD Snooping•
• MLD v1/v2 Snooping
• Supports 256 groups
• Host-based MLD Snooping Fast Leave
• Supports 64 static MLD groups
• MLD Snooping Querier
• Per-VLAN MLD Snooping
• MLD Proxy Reporting
• IGMP Snooping
• IGMP v1/v2/v3 Snooping
• Supports 512 IGMP groups
• Supports 64 static IGMP groups
• Per VLAN IGMP Snooping
• IGMP Snooping Querier
• Host-based IGMP Snooping Fast Leave
• PIM Snooping
L3 Features • ARP
• 512 static ARP
• Supports Gratuitous ARP
• ARP Proxy
• IP Interface
• Supports 256 interfaces
• Loopback interface
• IPv6 Neighbor Discovery (ND)
• UDP helper
• IPv6 tunneling
• Static
• ISATAP
• GRE
• 6to4
• IGMP Proxy Reporting
• VRRP v2/v3
L3 Routing Static routing•
• Max. 256 IPv4 entries
• Max. 128 IPv6 entries
• Supports Route Redistribution
• Supports secondary route
• Supports 4096 hardware routing entries shared by IPv4/IPv6
• Max. 4096 IPv4 entries
• Max. 1024 IPv6 entries
• Supports 32K hardware L3 forwarding entries shared by IPv4/
IPv6
• Max. 32K IPv4 entries
• Max. 16K IPv6 entries
• Default routing
• Policy-based Route (PBR)
• Null route
• Bidirectional Forwarding Detection (BFD)
• IPv4/IPv6 static route
• RIP
• VRRP
• RIP
• RIP v1/v2
• RIPng
• Graceful Restart (GR) Helper for RIP
• Route Redistribution
• Default route
• Static route
• RIP
• RIPng
• Null route
VLAN • 802.1Q
• 802.1v
• Double VLAN (Q-in-Q)
• Port-based Q-in-Q
• Selective Q-in-Q
• Port-based VLAN
• MAC-based VLAN
• Subnet-based VLAN
• Private VLAN
• VLAN group
• Max. 4K static VLAN groups
• Max. 4094 VIDs
• ISM VLAN (multicast VLAN)
• Voice VLAN
• Auto Surveilliance VLAN
• VLAN trunking
• GVRP
• Up to 4094 dynamic VLANs

Specyfikacje produktu

Marka: D-Link
Kategoria: przełącznik
Model: DXS-3400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z D-Link DXS-3400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje przełącznik D-Link

D-Link

D-Link DES-1024D Instrukcja

13 Stycznia 2025
D-Link

D-Link DGS-1100-08 Instrukcja

6 Stycznia 2025
D-Link

D-Link DGS-1100-05PD Instrukcja

5 Stycznia 2025
D-Link

D-Link DGS-1100-10MP Instrukcja

5 Stycznia 2025
D-Link

D-Link DGS-1510-28 Instrukcja

5 Stycznia 2025
D-Link

D-Link DGS-1210-20 Instrukcja

5 Stycznia 2025
D-Link

D-Link DGS-1100-05 Instrukcja

5 Stycznia 2025
D-Link

D-Link DKVM-222 Instrukcja

1 Stycznia 2025
D-Link

D-Link DKVM-2 Instrukcja

1 Stycznia 2025
D-Link

D-Link DKVM-4 Instrukcja

1 Stycznia 2025

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

Powerfix

Powerfix PSSS 2 A1 Instrukcja

14 Stycznia 2025
INOGENI

INOGENI CAM230 Instrukcja

14 Stycznia 2025
Schneider

Schneider CCT15225 Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-5248P Instrukcja

14 Stycznia 2025
Luxul

Luxul AMS-2624P Instrukcja

14 Stycznia 2025
Luxul

Luxul XGS-1005 Instrukcja

14 Stycznia 2025
Luxul

Luxul AGS-1008M Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-1208P Instrukcja

14 Stycznia 2025
Luxul

Luxul XMS-7048P Instrukcja

14 Stycznia 2025
Luxul

Luxul AMS-2600 Instrukcja

14 Stycznia 2025