Instrukcja obsługi D-Link DSS-100E-9P

D-Link przełącznik DSS-100E-9P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla D-Link DSS-100E-9P (10 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/10
Documentation is also available on
the D-Link website
This document will guide you through the
basic installation process for your new D-Link
Unmanaged Switch.
DSS-100E-9P
Quick Installation Guide
INSTALLATIONSANLEITUNG
GUIDE D’INSTALLATION
GUÍA DE INSTALACIÓN
GUIDA DI INSTALLAZIONE
2
ENGLISH
Front Panel Connectors
Figure 2: Front panel connectors
# Interface Description
1Ports 1 - 8
10/100 Mbps PoE-capable ports,
used for connecting Ethernet
devices and PoE-powered devices.
2Ports 9
10/100/1000 Mbps Ethernet
port for uplink connections to
NVR, storage or core switch.
Table 2: Front connector description
Rear Panel Connectors
Figure 3: Rear panel connectors
# Connector Description
1DC Power Input Input jack for the power adapter.
2SWITCH GND Screw used to secure a grounding
wire to connect the switch to ground.
Table 3: Rear connector description
Extended Mode
The DSS-100E-9P can automatically detect the long
reach requirement and activate Extended without
manual conguration.
P.S. The actual transmission distance will be aected
by cable quality or connected IP Camera design. The
device can support up to 250m application with
Cat5e above ethernet cable, but the transmission
may drop to 10Mbps speed or below.
Hardware Installation
Installation Precautions
For safe switch installation and operation, it is
recommended to:
Before You Begin
This Quick Installation Guide gives you step-by-step
instructions for setting up your DSS-100E-9P 9-port
10/100 PoE Surveillance Switch. The model you have
purchased may appear slightly dierent from the
one shown in the illustrations.
Package Contents
This DSS-100E-9P package should include the
following items:
• 1 x DSS-100E-9P
• 1 x Power cord
• 1 x Power adaptor
• 1 x Quick Installation Guide
If any of the above items are damaged or missing,
please contact your local D-Link reseller.
Hardware Overview
LED Indicators
Figure 1: Front panel LEDs
# LED Status Description
1Power
Solid
green
The switch is powered on.
O The switch is turned o.
2
Link/
ACT/
Speed
(Left
Led)
Solid
green
There is an active link negotiated
on this port.
Blinking
green
There is trac on the port.
O There is no active link on this port.
3
PoE
(Right
Led)
Solid
green
The port is providing power to the
connected PoE-powered device.
Blinking
green
Indicates a PoE-powered device
is connected to this PoE port,
but the switch has insufficient
remaining power budget to
power the device.
O There is no PoE-powered device
connected to this port.
Table 1: LED overview
1 2
1
1 2
3
2
3
ENGLISH
• Visually inspect the DC power jack and make sure
that it is fully secured to the power adapter.
• Make sure that there is proper heat dissipation
and adequate ventilation around the switch.
• Install the switch in a site free from strong
electromagnetic sources, vibration, dust, and
direct sunlight.
• Not place heavy objects on the switch.
Grounding the Switch
The following steps explain the procedure for
connecting the switch to a protective ground:
1. Verify that the system is powered o.
2. Remove the ground screw and place the #8
terminal lug ring at one end of the ground cable
on top of the ground screw opening.
3. Insert the ground screw back into the ground
screw opening.
4. Using a screwdriver, tighten the ground screw to
secure the ground cable to the switch.
5. Attach the terminal lug ring at the other end
of the grounding cable to an appropriate
grounding source.
6. Verify that the connections from the ground
connector on the switch to the grounding source
are securely attached.
Powering On the Switch
After connecting the switch to the network using
a compatible category 5/6/7 UTP network cable,
simply connect the switch to a power outlet to power
the device.
dlink.com/support

Specyfikacje produktu

Marka: D-Link
Kategoria: przełącznik
Model: DSS-100E-9P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z D-Link DSS-100E-9P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje przełącznik D-Link

D-Link

D-Link DSS-100E-9P Instrukcja

29 Marca 2025
D-Link

D-Link DMS-1100-10TP Instrukcja

5 Lutego 2025
D-Link

D-Link DES-1024D Instrukcja

13 Stycznia 2025
D-Link

D-Link DGS-1100-08 Instrukcja

6 Stycznia 2025
D-Link

D-Link DGS-1100-05PD Instrukcja

5 Stycznia 2025
D-Link

D-Link DGS-1100-10MP Instrukcja

5 Stycznia 2025
D-Link

D-Link DGS-1510-28 Instrukcja

5 Stycznia 2025
D-Link

D-Link DGS-1210-20 Instrukcja

5 Stycznia 2025
D-Link

D-Link DGS-1100-05 Instrukcja

5 Stycznia 2025
D-Link

D-Link DKVM-222 Instrukcja

1 Stycznia 2025

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

Hager

Hager ARF960D Instrukcja

31 Marca 2025
Hager

Hager ARF906D Instrukcja

31 Marca 2025
Hager

Hager ARF925D Instrukcja

31 Marca 2025
Hager

Hager ARF975D Instrukcja

31 Marca 2025
Hager

Hager HIB420M Instrukcja

31 Marca 2025
Crestron

Crestron CLW-SWEX-P Instrukcja

31 Marca 2025
Hikvision

Hikvision DS-XS10G-P Instrukcja

29 Marca 2025
Intermatic

Intermatic P1101 Instrukcja

20 Marca 2025
AirLive

AirLive IG-641RPOE Instrukcja

12 Marca 2025
AirLive

AirLive IGM-1082RBT Instrukcja

12 Marca 2025