Instrukcja obsługi D-Link DXE-820T


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla D-Link DXE-820T (2 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Dual Port 10 Gigabit Ethernet PCIe Adapter
DXE-820T
Add 10 Gigabit connectivity to your server or high-powered workstation with the D-Link
DXE-820T Dual Port 10 Gigabit Ethernet PCIe Adapter. It is a high performance network
adapter which combines 10GBase-T with high-speed PCI Express 2.0 x8 interface. The DXE-820T
oers increased bandwidth over standard Cat 6a cabling without the need to overhaul your
infrastructure wiring or invest in a costly upgrade to bre. Furthermore, the PCI express interface
oers increased bandwidth, reliability and functionality compared with standard PCI network
cards. It is specically designed to allow throughput at rates up to 40 Gbps, thus eliminating the
bottleneck that exists with current 32 and 64-bit PCI bus architectures.
Advanced Features and Security
The adapter features onboard screening of 802.1Q VLAN tagged Ethernet frames, allowing you
to assign multiple subnets to each server and isolate devices within each VLAN from the rest
of the network for better trac control and security. With support for advanced features such
as 802.3x ow control, jumbo frames, and SNMP for network management, the DXE-820T can
easily interoperate with your current networking equipment.
Performance and Reliability
The DXE-820T increases network throughput by utilising PCI Express bus architecture. With
Smart Load Balancing™, the DXE-820T congures multiple adapters to work as a team, sharing
trac and ensuring data reliability. This creates both a faster network and provides fault
tolerance resulting in a stable and ecient network.
Checksum Ooading
The DXE-820T features TCP, UDP, and IP checksum ooading functionality, which transfers
the checksum processing tasks from the computers CPU to the network card. The DXE-820T’s
ability to handle the checksum processing means that the CPU’s processing power can be used
for other tasks while still achieving 20 Gbps network speeds.
Features
High-Performance:
PCI Express Interface v2.0
Auto-negotiation
Up to 40 Gbps throughput
Advanced Standards-based Enterprise Features:
802.1Q VLAN tagging
802.3x ow control
802.3ad teaming
Jumbo frame support
SNMP statistics
TCP/UDP/IP checksum ooading
High-speed Transmission
High-speed data transmission at rates of up to
40 Gbps allow for seamless data transfer1
Advanced Features
802.3x ow control for trac management, 802.1Q
VLAN tagging for increased security, and checksum
ooading to reduce CPU processing burden
Bandwidth Management
NIC partitioning enables administrators to manage
bandwidth for greater network eciency
Product Highlights
DXE-820T Dual Port 10 Gigabit Ethernet PCIe Adapter
D-Link European Headquarters. D-Link (Europe) Ltd., D-Link House, Abbey Road, Park Royal, London, NW10 7BX.
Specications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners. ©2015 D-Link Corporation. All rights reserved. E&OE.
Updated October 2015
For more information: www.dlink.com
Technical Specications
General
Standards IEEE 802.1Q VLAN tagging
IEEE 802.3x flow control
IEEE 802.3an 10GBASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3az Energy-Efficient Ethernet (EEE)
IEEE 802.3ad teaming
PCI Express p2-x8 2.0, 5 GT/s compliant
Power Maximum Power Consumption: 23.38 W Input Voltage: 3.3 V and 12 V
Data Transfer Rate 1 Gbps Full Duplex
10 Gbps Full Duplex
Auto mode (support 100 Mbps)
Transmit Distance 10GBASE-T
100M with Cat 6A or higher UTP
50M with Cat 6 UTP
100/1000BASE-T
100M with Cat 5 or higher UTP
Interface Slot PCI Express v2.0 x8/x16 slot Includes standard and low profile brackets
Supported Functions NIC partitioning
Other performance features
TCP, IP, UDP checksum
TCP segmentation
Adaptive interrupts
Receive Side Scaling (RSS)
Manageability
Statistics for SNMP MIB II, Ethernet-like MIB, and
Ethernet MIB
SMBus controller
IPMI support (IPMI pass thru mode)
Advanced network features
Jumbo frames (up to 9 KB)
Virtual LANs
Smart load balancing teaming
LiveLink™ (supported in both the 32-bit and 64-bit
Windows operating systems)
Logical Link Control (IEEE Std 802.2)
Layer-2 Priority Encoding (IEEE Std 802.1p)
High-speed on-chip RISC processor
Up to 3 classes of service (CoS)
Integrated 96 KB frame buffer memory
Quality of Service (QoS)
Support for multicast addresses via 256 bits hashing
hardware function
JTAG support
PCI Power Management Interface (v1.1)
64-bit BAR support
iSCSI Boot support
Virtualization
Microsoft
VMware
Functionality
Driver Support Windows Server 2008 (x86, x64)/2008 R2 (x64)
Windows Server 2012
RHEL 6.4/6.5 (x64), RHEL 5.9 (x64)
SLES 11.2/11.3 (x64)
Solaris 11/11.1
Diagnostic LED
Speed/Link Activity
Physical
Dimensions 181 mm x 120.9 mm x 21.6 mm (7.13 x 4.76 x 0.85 inches)
Temperature Operating: 0 to 40 °C (32 to 104 °F) Storage: -20 to 70 °C (-4 to 158 °F)
Humidity Operating: 10% to 90% non-condensing Storage: 10% to 90% non-condensing
Certifications CE
FCC
C-Tick
1 When connected in full-duplex mode.


Specyfikacje produktu

Marka: D-Link
Kategoria: Karta sieciowa/adapter
Model: DXE-820T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z D-Link DXE-820T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Karta sieciowa/adapter D-Link

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter