Instrukcja obsługi Cygnett ChargeUp Auto 10K

Cygnett Niesklasyfikowane ChargeUp Auto 10K

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cygnett ChargeUp Auto 10K (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
CHARGEUP AUTO 10K
JUMPSTARTER
USER MANUAL
Cygnett and the Cygnett logo are trademarks of Cygnett
Pty Ltd. Other brands and product names are trademarks or
registered trademarks of their respective holders.
© 2020 Cygnett PTY LTD.
Cygnett Head Oice
858 Lorimer Street, Port Melbourne
Victoria, 3207, Australia
This symbol on the product indicates that this product shall
not be treated as household waste. Instead it shall be sent to
the applicable collection point for the recycling of electronic
equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for the
environment and human health. For more information about the
recycling of this product, please contact your local city oice.
Caution
Please read all warnings for your safety and optimal user
experience. Please read and follow these instructions carefully
and retain for your records.
1. Disposal of a battery into ire or a hot oven, mechanically
crushing or cutting of a battery, can result in an explosion.
2. Leaving a battery in an extremely high temperature can result
in an explosion or the leakage of lammable liquid or gas.
3. A battery subjected to extremely low air pressure may result
in an explosion or the leakage of lammable liquid or gas.
4. Power bank will generate heat when charging. Always
charge in a well-ventilated area. Do not charge under pillows,
blankets or on lammable surfaces.
5. Keep the power bank away from heat sources, direct sunlight,
combustible gas, humidity, water or other liquids.
6. Do not disassemble, open, microwave, incinerate, paint or
insert foreign objects into the power bank.
7. Do not subject the power bank to mechanical shock such as
crushing, bending, puncturing or shredding. Avoid dropping
or placing heavy objects on the power bank.
8. Do not short circuit the power bank on or store it in a
receptacle where it may be short circuited by other metallic
or conductive objects.
9. Do not operate the power bank if it has been wet or otherwise
damaged, to prevent against electric shock, explosion and/or
injury. Contact the dealer or authorized agent.
10. Do not connect the red and black clamps to the same piece
of metal, to prevent injury and damage to the vehicle.
Caution
11. Always make sure the relay plug of the jumper cable
connects with the jump starter socket securely into the
power bank before jump starting the vehicle.
12. Always check that the clamps are securely connected. Ensure
the vehicle battery is free of rust/dirt before jump starting the
vehicle.
13. Do not connect the two clamps together, as this could be
dangerous.
14. Keep power bank away from children.
Please note that changes or modiications not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment. Cygnett takes
no responsibility for damages caused by incorrect use of its
products. Made in China.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a
major failure.
Cygnett warrants this product against defects in workmanship
and material for a period of two (2) years from its original
purchase date. You must present your receipt as proof of date
of purchase for warranty validation. Please read the following
information carefully and retain this for any warranty claim.
Terms & Conditions
• This product is for household use only. If the product is used
in a commercial environment, the warranty period will be
automatically reduced to three (3) months.
• Cygnett warrants that, with normal use or service, the product
will be free from faulty parts, manufacture or workmanship.
• The warranty does not apply where damage is caused by other
factors, e.g. mishandling, abuse, accident or failure to follow
operating instructions.
Recharge Your Power Bank
To recharge your power bank, use the included USBC to
USBA cable, and connect it into a compatible USBA/C
charger*, then insert the USBC connector into the USBC
input (F). When recharging, the LED battery charge indicator
(C) will lash, indicating the remaining charge levels. *USBA/C
charger must support at least 5V 2A (10W) to recharge.
Jump-Starting Your Vehicle
Before jump-starting your vehicle, ensure that the power bank
has enough battery capacity. Ensure that the vehicle battery
connector is free of rust/dirt.
1. Connect the jump starter adapter (J) into the jump-starter
socket (G).
2. Connect the red clamp the positive (+) battery terminal
irst, then connect the black clamp to the negative (-) battery
terminal.
3. Before jump-starting the car, check the following on the
jump-starter indicator (K):
Charge Your Device
Recharge your device(s) with a compatible USBA cable, by
connected the cable into the USBA output(s) (D & E). Press
the power button (A) to begin charging. When you are inished
charging your device(s), remove the cable from your power
bank, and it will turn o automatically.
To check the remaining charge on your power bank, press the
power button (A) once. The LED battery charge indicator (C)
will show the remaining charge.
Power Your 12V Device
Connect the 12V female cigarette lighter adapter (M) into
the 12V DC output (H). Connect your 12V device into the 12V
female cigarette lighter socket. Press the power button (A) to
begin powering your device.
LED Flashlight
Press the power button (A) once to turn on the power bank.
Then, press and hold the LED lashlight button (B) to turn
on the LED lashlight (I). The LED lashlight has 3 modes:
solid beam, strobe and SOS. Cycle through these modes by
pressing the LED lashlight button (B).
Product Speciications
APower button
BLED lashlight button
CBattery charge indicator
DUSBA output 1
EUSBA output 2
FUSBC input
GJump-starter socket
H12V DC output
ILED lashlight
JJump-starter adapter, cable and clamps
KJump-starter indicator
LBOOST button
M12V female cigarette lighter adapter
Light Colour Status/Action
Green Car is ready to be jump-started.
Red An incorrect connection has been detected.
Please double check the battery terminals.
None Press the BOOST button (L) for 3 seconds
until the green indicator lights up.
Flashing red Jump-starter power bank is low in battery.
Charging of the power bank is required.
Name ChargeUp Auto 10000 mAh
Item Number CY3577CHAUT
Battery Capacity 10000mAh/37Wh
USBA Output 1 5V 2.1A (10.5W)
USBA Output 2 5V 1.6A (8W)
DC Output 12V10A (120W)
USBC Input* 5V 2A (10W)
Jump-Start Current 12V600A1500A
Designed to
Jump-Start
(Up To)
10-cylinder petrol vehicles 7.0L
(7000cc max)
8-cylinder diesel vehicles 4.5L
(4500cc max)
*USBA/C charger must support at least 5V 2A (10W)
to recharge the power bank.
A
C
F
G
H
L
J
K
B
D
E
I
M
Error Status Light & Beep Action
Reverse
Polarity
Correct the
connection
Low Battery Recharge
Jump-Starter
Overtime Disconnect
Jumper-Cable
Reverse Charge
/ Over Voltage
Disconnect
Jumper-Cable
Overheat Cool down
for 10 minutes
No Green Light On: Please make sure it is
connected correctly, then press the BOOST
button for 3 seconds until the green light
appears indicating it is ready to jump-start.
4. When the jump-starter indicator (K) is green, proceed to
jump-start your car. Do not jump start your car for longer than
5 seconds at a time. Allow to rest for 10 seconds between each
jump-start.
5. Remove the clamps from the vehicle battery terminals.


Specyfikacje produktu

Marka: Cygnett
Kategoria: Niesklasyfikowane
Model: ChargeUp Auto 10K

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cygnett ChargeUp Auto 10K, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Cygnett

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024