Instrukcja obsługi CyberPower BPSE240V47AOA

CyberPower Accu BPSE240V47AOA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CyberPower BPSE240V47AOA (8 stron) w kategorii Accu. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
1
BPSE240V 47A
BPSE240V47AOA
User s Manual
K01-C000 - 048 03
This manual contains important instructions. Please read and follow all instructions
carefully during installation and operation of the unit. Read this manual thoroughly
before attempting to unpack, install, or operate the Battery modules.
The UPS unit must be connected to a grounded AC power CAUTION!
outlet with fuse or circuit breaker protection. The Battery modules grounded are
through the UPS.
The battery can power hazardous components inside the unit, CAUTION!
even when the AC input power is disconnected.
SAFETY
2
To prevent the risk of fire or electric shock, install in a CAUTION!
temperature and humidity controlled indoor area, free of conductive
contaminants. (Please see specifications for acceptable temperature and
humidity range).
CAUTION! (No User Serviceable Parts): Risk of electric shock, do not
remove cover. No user serviceable parts inside. Refer servicing to qualified
service personnel.
Risk of electric shock, battery CAUTION! (Non-Isolated Battery Supply):
circuit is not isolated from AC power source; hazardous voltage may exist
between battery terminals and ground. Test before touching.
Wiring must be done by qualified personnel.CAUTION!
CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS!
To reduce the risk of fire, do not use with or near aquariums. Condensation from
the aquarium can come in contact with metal electrical contacts and cause the
machine to short out.
Do not dispose of batteries in fire as the battery may explode. CAUTION!
Do not open or mutilate the battery, released electrolyte is CAUTION!
harmful to the skin and eyes.
A battery can present a risk of electric shock and high short CAUTION!
circuit current. The following precaution should be observed when working on
batteries
1. Remove watches, rings or other metal objects.
2. Use tools with insulated handles.
Make sure everything is turned off and disconnected completely CAUTION!
before conducting any maintenance, repairs or shipment.
Connect the Protection Earth (PE) safety conductor before any CAUTION!
other cables are connected.
DO NOT INSTALL THE UNIT WHERE IT WOULD BE EXPOSED TO
DIRECT SUNLIGHT OR NEAR A STRONG HEAT SOURCE!
SERVICING OF BATTERIES SHOULD BE PERFORMED OR
SUPERVISED BY PERSONNEL KNOWLEDGE OF BATTERIES AND THE
REQUIRED PRECAUTIONS. KEEP UNAUTHORIZED PERSONNEL
AWAY FROM BATTERIES!
The box should contain the following:
Battery Module
UNPACKING
3
Battery Cable
User’s manual
SCHEMATIC
Fuse
Battery String 1 Battery String 2
BATT.OUTPUT+
BATT.INPUT+
BATT.INPUT-
BATT.OUTPUT-
FRONT/REAR PANEL DESCRIPTION
.Output Connector: Use this output connector to connect the Battery module
BASIC OPERATION

Specyfikacje produktu

Marka: CyberPower
Kategoria: Accu
Model: BPSE240V47AOA

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z CyberPower BPSE240V47AOA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Accu CyberPower

Instrukcje Accu

Najnowsze instrukcje dla Accu

Anova

Anova VAR3030 Instrukcja

8 Października 2024
Valcom

Valcom VBB-1424 Instrukcja

8 Października 2024
TOA

TOA BP-920 Instrukcja

8 Października 2024
Vonroc

Vonroc S_CF501DC Instrukcja

8 Października 2024
DeWalt

DeWalt DCB547 Instrukcja

8 Października 2024
Canon

Canon LP-E19 Instrukcja

6 Października 2024
Duracell

Duracell CR123 Instrukcja

5 Października 2024