Instrukcja obsługi Cybernet IPC-R2ix
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cybernet IPC-R2ix (7 stron) w kategorii pulpit. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/7
1
IPC-R2ix
User Manual
2
Declaration of Conformity
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be require to correct the
interference at his own expense.
Notice 1 The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Notice 2 Shielded interface cables and/or A.C. power cord, if any, must be used in order to
comply with the emission limits.
The product(s) described in this manual complies with all applicable European
Union (CE) directives if it has a CE marking. For computer systems to remain CE
compliant, only CE-compliant parts may be used. Maintaining CE compliance
also requires proper cable and cabling techniques.
Trademarks
All trademarks are the properties of their respective owners.
Intel® is a registered trademarks of Intel Corporation.
PS/2 and OS®/2 are registered trademarks of International Business Machines Corporation.
Windows® 7/Vista/XP/NT/2000/98/95 are registered trademarks of Microsoft Corporation.
Netware® is a registered trademark of Novell, Inc.
Award® is a registered trademark of Phoenix Technologies Ltd.
AMI® is a registered trademark of American Megatrends Inc
FCC
CE
3
Safety Instructions
1. Always read the safety instructions carefully.
2. Keep this equipment away from humidity.
3. Lay this equipment on a reliable flat surface before setting it up.
4. Confirm the voltage of the power source and adjust accordingly to 110/220V
before connecting the equipment to the power inlet.
5. Place the power cord in such a way that it cannot be stepped on. Do not
place anything over the power cord.
6. Always unplug the Power Cord before inserting any add-on card or module.
7. All cautions and warnings on the equipment should be noted.
8. Never pour any liquid into the opening. This will cause damage and/or electrical
shock.
9. Do not disable the protective grounding pin from the plug. The equipment must be
connected to a grounded main socket/outlet.
10. When installing the coaxial cable to the TV Tuner, it is necessary to ensure that the metal
shield is reliably connected to a protective earthing system of the building. Cable
distribution systems should be grounded (earthed) in accordance with ANSI/NF PA 70,
the National Electrical Code (NEC ), in particular, Section 820.93, Grounding of Outer
Conductive Shield of a Coaxial Cable.
11. If any of the following situations arise, have the equipment checked by authorized
service personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not worked well or you cannot get it working according to
the User's Guide.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
12. Do not attempt to remove or upgrade any components by yourself, any installation or
modification should be conducted by service personnel.
DO NOT LEAVE THIS EQUIPMENT IN AN UNCONDITIONED ENVIRONMENT WITH
A STORAGE TEMPERATURE ABOVE 85° C (185°F). IT MAY DAMAGE THE
EQUIPMENT.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer.
Specyfikacje produktu
| Marka: | Cybernet |
| Kategoria: | pulpit |
| Model: | IPC-R2ix |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Cybernet IPC-R2ix, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje pulpit Cybernet
31 Maja 2024
31 Maja 2024
31 Maja 2024
Instrukcje pulpit
- pulpit Lenovo
- pulpit Acer
- pulpit Fujitsu
- pulpit Viewsonic
- pulpit Asus
- pulpit Medion
- pulpit MSI
- pulpit HP
- pulpit Tripp Lite
- pulpit Dell
- pulpit Asrock
- pulpit Elo
- pulpit Zotac
Najnowsze instrukcje dla pulpit
6 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024